Forums - 300B Tubes

Kamran Seasoned Member Sarah Posts: 1202	Re: 300B Tubes Reply #100 - 09/07/23 at 19:13:47 Thx Lon!
Back to top	Innuos Pulse Streaming Transport and Phoenix Net Switch-Lampizator Atlantic 3 TRP DAC-Ic0n4 Autoformer Passive Pre-Sarah 300B SET Amp-GIK Room Treatment—Walnut Pure Audio Project Duet 15 w Voxative PiFe-P.I. Audio MajikBuss & Puritan PSM 156 Conditioners IP Logged

MM Seasoned Member Posts: 324	Re: 300B Tubes Reply #101 - 09/08/23 at 02:20:10 The last time I talked to Don he was undergoing some serious medical treatments. It’s not my story to tell, but I would be surprised if he would be at Decfest, although I could be wrong. If he doesn’t respond immediately be patient with him. My thoughts go out to him and wish him the best.
Back to top	Cambridge CXN100, DSR3 Interconnects, SEWE 300b, ZSTYX SC, Lii F15 & W15 in open baffle. IP Logged

Kamran Seasoned Member Sarah Posts: 1202	Re: 300B Tubes Reply #102 - 09/08/23 at 03:36:25 Thx for the heads up Gilf. I wish him as well and will inquire about his health when I reach out.
Back to top	Innuos Pulse Streaming Transport and Phoenix Net Switch-Lampizator Atlantic 3 TRP DAC-Ic0n4 Autoformer Passive Pre-Sarah 300B SET Amp-GIK Room Treatment—Walnut Pure Audio Project Duet 15 w Voxative PiFe-P.I. Audio MajikBuss & Puritan PSM 156 Conditioners IP Logged

Kamran Seasoned Member Sarah Posts: 1202	Re: 300B Tubes Reply #103 - 09/10/23 at 05:45:15 We exchanged emails. Thankfully, he’s on the mend and planning to drive down next month to meet the fellow crazies. And he’s bringing goodies (more details on the Decfest thread)!
Back to top	Innuos Pulse Streaming Transport and Phoenix Net Switch-Lampizator Atlantic 3 TRP DAC-Ic0n4 Autoformer Passive Pre-Sarah 300B SET Amp-GIK Room Treatment—Walnut Pure Audio Project Duet 15 w Voxative PiFe-P.I. Audio MajikBuss & Puritan PSM 156 Conditioners IP Logged

GroovySauce

Seasoned Member

Posts: 917

Re: 300B Tubes
Reply #104 - 10/24/23 at 15:24:08

I still have a long way to go. Sitting in the high 500's on The List(TM).

I fell in love with the EML 5u4g Mesh plate. It is the sound I want. It's also a super sexy looking tube.

EML makes a few different versions of the 300b one of them is a mesh plate version. It was designed for low anode dissipation.Is this tube is compatible with the Sarah 300B?

It has a recommended anode dissipation of 22 watts and a maximum of 28 watts.

http://www.emissionlabs.com/datasheets/EML300B-mesh.html

http://www.emissionlabs.com/datasheets/EML300B-mesh-final.html

Back to top

IP Logged

CAJames

Seasoned Member

"I've run every
red light on memory
lane."

Posts: 2772

Re: 300B Tubes
Reply #105 - 10/24/23 at 20:35:55

Quote:

Posted by: GroovySauce Posted on: Today at 07:24:08

...EML makes a few different versions of the 300b one of them is a mesh plate version. It was designed for low anode dissipation.Is this tube is compatible with the Sarah 300B?

Based on the last post I saw from Steve Sarah is at 28 watts and change. So, I guess the question is do you feel lucky? Of course contacting Steve would remove the guesswork.

Back to top

[FOOBAR2000 | Jay's CDT2 MRK3] -> Denafrips Terminator 2 + Gaia
Sumiko Pearwood -> Mapleknoll Athena -> Luxman SUT -> Mapletree Phono 3E
STR-1002 -> Woo WA22 -> 2x UFO25s, balanced monos
Omega SAM , Hifiman Arya, Audeze LCD-XC

IP Logged

GroovySauce Seasoned Member Posts: 917	Re: 300B Tubes Reply #106 - 10/25/23 at 14:51:39 Quote: Based on the last post I saw from Steve Sarah is at 28 watts and change. So, I guess the question is do you feel lucky? Of course contacting Steve would remove the guesswork. Thank you. I guess when it gets closer to shipping I'll reach out to Steve and see what he says.
Back to top	Maximus NEO TT\|ViV Rigid Float TA \| Hana ML \| Sutherland Little Loco MK2 \| Innuos ZENith MK3 \| LampizatOr GA TRP \| EMIA Remote Autoformer \| STL "Super Tube Rectifier" STR-1002 \| SRA Cables \| PAP Quintet 15 AC-X Field Coil \| Torus AVR15 IP Logged

Lon

Seasoned Member

"Love without
guts is
worthless!"
Philip K. Dick

Posts: 26647

Re: 300B Tubes
Reply #107 - 10/26/23 at 21:32:18

Well shortly after I turned the amp on Monday one of my Sophia Electric Classic 300B went silent except for a hum. Didn't take out a fuse or impact the amp in any way, but I was down to one channel listening. I brought out the headphones. . . .

I contacted Sophia Electric and as I had a demo pair that was not offered with any warranty (at a big discount) I was out of luck. I figured these were demo tubes and should last longer than . . . 700 hours but that is about what I got out of that tube. They offered to try to match another tube for me at the same price (half the price of the pair) and I may take them up on that but that was going to take time and damnit I wanted to listen to music. I have a pair of Cryotone 300B-WC on order but on inquiry I can't expect those til they maybe ship next week. So. . . I ordered a rather inexpensive pair of Psvane 300B HIFI tubes, I think their lowest model.

Those arrived today and I'm listening to them now. Honestly they sound decent. Not quite as good as the Sophia Electric so far but they're also not broken in and I'm so eager to listen to speakers that I am cutting them some serious slack. Ah. I'm listening to the amp again, and that's certain happiness.

I'm looking forward to testing the Cryotone 300B-WC. If they don't knock my socks off I'll return them and order a pair of WE300B. But I think from what I have read from Steve, et al here that I'll be happy with them.

Til then I think that for about 260 a matched pair the Psvane HIFI are a good backup pair.

Back to top

HR-1,ZBIT,ZROCK3,SEWE300B; Rega RP3 all GrooveTracer mods;PSAudio:PST+DSD, DAC Mk II,NPC,PowerBases,AC-12 pwr cbls, Reference spkrcbls; Mapleshade SamsonV3;VeraFi Audio cpts VooDoo:Cremona+Amati interconnects;Stack EQ; headphones:Sennheiser HD800S,ZMF Ori,Oppo PM1

IP Logged

CAJames Seasoned Member "I've run every red light on memory lane." Posts: 2772	Re: 300B Tubes Reply #108 - 10/27/23 at 00:18:21 I'm sorry for your loss Lon. For me, my inexpensive 300B tubes sounded fine. I probably would have been happy with them...until I tried really good 300Bs.
Back to top	[FOOBAR2000 \| Jay's CDT2 MRK3] -> Denafrips Terminator 2 + Gaia Sumiko Pearwood -> Mapleknoll Athena -> Luxman SUT -> Mapletree Phono 3E STR-1002 -> Woo WA22 -> 2x UFO25s, balanced monos Omega SAM , Hifiman Arya, Audeze LCD-XC IP Logged

Lon Seasoned Member "Love without guts is worthless!" Philip K. Dick Posts: 26647	Re: 300B Tubes Reply #109 - 10/27/23 at 00:22:11 I hear you. The Classic 300Bs sounded really good. These sound fine for now. Time to hear another pair. . . in a week or two.
Back to top	HR-1,ZBIT,ZROCK3,SEWE300B; Rega RP3 all GrooveTracer mods;PSAudio:PST+DSD, DAC Mk II,NPC,PowerBases,AC-12 pwr cbls, Reference spkrcbls; Mapleshade SamsonV3;VeraFi Audio cpts VooDoo:Cremona+Amati interconnects;Stack EQ; headphones:Sennheiser HD800S,ZMF Ori,Oppo PM1 IP Logged

Ghostship

Seasoned Member

Posts: 167

Re: 300B Tubes
Reply #110 - 10/27/23 at 11:11:59

Lon, Sorry about the Sophia. It's been my experience that Psvane tubes sound very underwhelming when new, but really sound great once they reach their break-in point...so much so that there's no mistaking when they are or aren't broken in, lol.

And yes, I too go through serious withdrawal symptoms when I'm unable to listen to my Sarah... Smiley

Pretty sure there's a support group for us somewhere..."I'm Michael, and I'm a Sarahholic".

Back to top

Paul Pang Quad Network Switch & Fiber
MSB Premier DAC
Zen Sarah SEWE300B
Cryotone Bundle
Tekton 2-12 Perfect SET Speakers w/ BE Tweeters and Cap & Wiring upgrades
Tekton 2-10 Sub

IP Logged

Lon

Seasoned Member

"Love without
guts is
worthless!"
Philip K. Dick

Posts: 26647

Re: 300B Tubes
Reply #111 - 10/27/23 at 11:53:59

LOL! Well, I'm liking the sound of these Psvane right now, so if they improve that's great. (Of course with the ZBIT and the ZROCK2 I can make mediocre sound become much nicer, man I love these components.)

I actually enjoyed the headphone use. I put my trusty old CSP3 into the system that Steve built with a glass resistor bypassing the input gain section and with the full Anniversary mods--with the Sennheiser HD800S and the ZROCK2 this makes fantastic sound that transports me. But I was eager to get the SEWE300B going again, it's a special amp, it has really seduced me. My wife likes it too, more than any other amp I've played the last 9 years we've been together. . . but she's a bit jealous of how it pulls me off to listen.

I think Steve will be building and building these. They're going to call to many.

Back to top

HR-1,ZBIT,ZROCK3,SEWE300B; Rega RP3 all GrooveTracer mods;PSAudio:PST+DSD, DAC Mk II,NPC,PowerBases,AC-12 pwr cbls, Reference spkrcbls; Mapleshade SamsonV3;VeraFi Audio cpts VooDoo:Cremona+Amati interconnects;Stack EQ; headphones:Sennheiser HD800S,ZMF Ori,Oppo PM1

IP Logged

Lon

Seasoned Member

"Love without
guts is
worthless!"
Philip K. Dick

Posts: 26647

Re: 300B Tubes
Reply #112 - 11/18/23 at 01:33:30

So now I have the Cryotone 300B-WC broken in and also a pair of Takatsuki 300B to check out thanks to James.

Both are excellent tubes. . . my untreated room and system seems to prefer the Cryotone as though I don't find it has the extra bass that others report, it has more than the Japanese tubes and it has a density that I had grown so used to with my SE84UFO3 Monoblocks.

Oddly I think the best tubes for my system may have been the Sophia Electric 300B Classic, but one failed so early that I haven't sought another pair. Those had an extra richness that suited my less than stellar recordings (the bulke of my big collection) more, a bit more forgiving and warm.

I have decided that I like the Cryotone tubes now, those three that came with the CSP3 that I bought from JOMAN are as good as my nicest 7308s, and I'm breaking in Cryotones for the ZROCK2 and the input position of the SEWE300B that are showing promise. I started off wtih the 6SN7 and that seems a mistake as that Cryotone pair I could not get to work in my main system, and the Cryotone 5AR4 I got with the CSP3 from JOMAN I didn't like at all either. I'm waiting on a pair of the same in the CSP3 for the driver tubes on the SEWE300B to see how that compares to the 7308s I'm using there.

Overall I'm truly enjoying the SEWE300B with whatever tube complement I use--it's a fantastic amp.

Back to top

HR-1,ZBIT,ZROCK3,SEWE300B; Rega RP3 all GrooveTracer mods;PSAudio:PST+DSD, DAC Mk II,NPC,PowerBases,AC-12 pwr cbls, Reference spkrcbls; Mapleshade SamsonV3;VeraFi Audio cpts VooDoo:Cremona+Amati interconnects;Stack EQ; headphones:Sennheiser HD800S,ZMF Ori,Oppo PM1

IP Logged