Welcome, Guest. Please Login or Register
Decware Audio Forums
10/26/21 at 06:56:03 


       


Pages: 1
Send Topic Print
ZKIT2 6N1P (6922) Input Tube Resistor Specs (Read 40 times)
RonFranks
Verified Member
**




Posts: 9
ZKIT2 6N1P (6922) Input Tube Resistor Specs
10/13/21 at 18:32:16
 
I’m building the ZKIT2 using the 6N1P input tube and the 6P15P-EV output tube.  What value resistor should be placed in J1 on the circuit board for the 6N1P tube?  
Back to top
 
 
  IP Logged
funch
Seasoned Member
****




Posts: 100
Re: ZKIT2 6N1P (6922) Input Tube Resistor Specs
Reply #1 - 10/15/21 at 06:08:35
 
'J' means 'jumper', so you would use a piece of resistor lead at J1, or 'jumper' J1. Leave both J2 positions unpopulated.
Back to top
 
 
  IP Logged
RonFranks
Verified Member
**




Posts: 9
Re: ZKIT2 6N1P (6922) Input Tube Resistor Specs
Reply #2 - 10/15/21 at 15:07:35
 
Thanks very much.  Perhaps, if I’d thought about it further I might have realized that.  Maybe not.  I appreciate your reply.
Back to top
 
 
  IP Logged
Pages: 1
Send Topic Print