Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl SUPPORT FORUMS FOR ZKITS >> ZKIT 2 Support forum >> ZKIT2 6N1P (6922) Input Tube Resistor Specs https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1634146336 Message started by RonFranks on 10/13/21 at 18:32:16 |
Title: ZKIT2 6N1P (6922) Input Tube Resistor Specs Post by RonFranks on 10/13/21 at 18:32:16 I’m building the ZKIT2 using the 6N1P input tube and the 6P15P-EV output tube. What value resistor should be placed in J1 on the circuit board for the 6N1P tube? |
Title: Re: ZKIT2 6N1P (6922) Input Tube Resistor Specs Post by funch on 10/15/21 at 06:08:35 'J' means 'jumper', so you would use a piece of resistor lead at J1, or 'jumper' J1. Leave both J2 positions unpopulated. |
Title: Re: ZKIT2 6N1P (6922) Input Tube Resistor Specs Post by RonFranks on 10/15/21 at 15:07:35 Thanks very much. Perhaps, if I’d thought about it further I might have realized that. Maybe not. I appreciate your reply. |
Forums » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |