Welcome, Guest. Please Login or Register
Decware Audio Forums
07/05/20 at 01:36:10 


       


Pages: 1
Send Topic Print
Betsy baffles with a cherry on top (Read 714 times)
Randy in Caintuck
Seasoned Member
****


Tube be ... or not
tube be ... it's a
no-brainer.

Posts: 821
Betsy baffles with a cherry on top
03/02/20 at 19:10:14
 


In the past, I had resisted "gluing up" baffles with multiple sections of the same hardwood because I was afraid that the grain patterns would end up looking like a "dumpster fire" .....

However, after seeing some of the audio artwork that Steve has produced and making a couple of pairs of Lii 15 baffles from three panels of hard maple, I have decided that my fears were not warranted.

Today, I shipped out a pair of Betsy baffles made from three panels of cherry hardwood and they turned out well, IMO.
Of course, the photos don't do justice to the actual speakers ..... but I thought that I would share one with the forum readers.



Larger photo here.

My next project (as time allows) will be some glued up poplar that can be stained with a variety of wood stains or with a coat of linseed oil / beeswax.

Happy listening,
Randy

Back to top
 
 

CEC TL5N belt drive CD transport
Camelot Uther / Anagram DAC
U-Turn Audio Orbit Plus turntable
AudioQuest DragonFly Red USB DAC / tablet
Schiit Audio Eitr USB to RCA converter
Decware SE84UFO amplifier
Caintuck Audio Betsy Open Baffles and Alpha bass baffles
WWW   IP Logged
Geno
Seasoned Member
****


Without music, life
would be a mistake.
Nietzsche

Posts: 889
Re: Betsy baffles with a cherry on top
Reply #1 - 03/02/20 at 21:59:37
 
Nice work, Randy! They look fabulous!
Back to top
 
 

SE84UFO(25th Mods)
CSP3
PS Audio DSDAC JR / Cambr.Audio CXC / LRaven AudioPC / ZBIT
Technics 1210MK5(KAB Mods)-KAB/Ortof ProS 40 cart / ZP3(25th Mods)
Otari MX5050 R2R
Decware ZLC
Alnico Betsy Baffles OR Crystal 10 Baffles
(2) 12" Lii Bass Baffles
  IP Logged
HockessinKid
Seasoned Member
****




Posts: 437
Re: Betsy baffles with a cherry on top
Reply #2 - 03/02/20 at 22:52:46
 
👍👍👍👍 Looking good Randy.

HK
Back to top
 
 

Nottingham Interspace TT w/ Dynavector 20x2LO cart + Modwright PH 9.0 phono pre > ZROCK2-25th OR Modwright modified Cambridge CNX V2 > CSP3-25th preamp > ZMA-25th amp > PI Audio Group UberBUSS PC > Omega SAHO XRS or Caintuck Audio Lii 15 speakers > various cables.
  IP Logged
Steve Deckert
Administrator
*****


If the 1st watt
sucks why continue?

Posts: 4580
Re: Betsy baffles with a cherry on top
Reply #3 - 03/03/20 at 15:26:52
 

Randy,

Congrats on another fine looking pair of speakers!  Interestingly it was your glue-ups, in particular the Paduke and Wenge baffles you made for me that inspired the Big Betsy project.

After seeing more than one of my wood projects come out perfect and then months later warp to become firewood... wide boards make me nervous.  I can promise you that If I made 16 inch x 3/4 panels like you did from time to time, some would have turned into potato chips.  Even on the big baffles I have been making if the board is wider than 8 inches, I rip it in half.

Steve  :)
Back to top
 
 
WWW   IP Logged
Pages: 1
Send Topic Print