Forums - Starting build

06/26/26 at 05:21:55

Most recent 50 posts
Welcome, Guest. Please Login or Register

Forums » ZKIT 2 Support forum

‹ Previous topic | Next topic ›

Pages: 1

Starting build (Read 2895 times)

Falconer Seasoned Member Offline I love YaBB 1G - SP1! Posts: 112 x1\|Pelham\|USA\|USA\|393\|233\|AL,Alabama	Starting build 09/07/18 at 23:51:22 I am looking at the circuit board to wire in the Edcor GXSE txf. The board has red and blue labled, the white & violet are the ouput, what does the white/blue connect to?
Back to top	HDT Alt Tuning, ZMC1, ZDSD, ZSB, REL Subwoofer, Audio Electronic AE-3 Preamp, Audio Electronic PH-1 Phono Preamp, Audio Electronic SE-811 Amp, (2)Otari MX-5050Bii-2, Otari MTR-10, (2)Otari MTR-12, Linn Sondek LP-12 with Krystal MC cartridge IP Logged Share: Likes:

4krow

Seasoned Member

Offline

IMAGINE WHIRLLED
PEAS

Posts: 1683
powell, wyoming

Re: Starting build
Reply #1 - 09/08/18 at 17:55:10

I would refer to the Edcor website to find that out. Also, a photo of the board would help in determining the wiring. The traces of the board will help to determine wiring too.

So far,I have found that these leads are as follows: Blue= Plate, Blue/white= screen, Red= B+. The other 2 wires are speaker output with white being common, and Yellow being 8 ohm tap. Please, if anyone sees a correction, speak up.

Decware 34I.3 integrated amp/Forte' 3 bass amp/Velodyne SMS-1 bass mngmnt system/Decware ZOB speakers/Audio Nirvana 8" bass drivers/Xiang Seng DAC/ LR Audio Computer/Rega Apollo R CDP/Emotiva ERC3 CDP/BPT 3.0 power cond.

IP Logged

Likes:

Pages: 1

‹ Previous topic | Next topic ›