Welcome, Guest. Please Login or Register
Decware Audio Forums
04/19/24 at 02:54:44 




Forums › SUPPORT FORUMS FOR ZKITS › ZKIT 2 Support forum ‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
Starting build (Read 2228 times)
Falconer
Seasoned Member
****


I love YaBB 1G -
SP1!

Posts: 112
Starting build
09/07/18 at 23:51:22  
I am looking at the circuit board to wire in the Edcor GXSE txf. The board has red and blue labled, the white & violet are the ouput, what does the white/blue connect to?
Back to top
 
 
HDT Alt Tuning, ZMC1, ZDSD, ZSB, REL Subwoofer, Audio Electronic AE-3 Preamp, Audio Electronic PH-1 Phono Preamp, Audio Electronic SE-811 Amp, (2)Otari MX-5050Bii-2, Otari MTR-10, (2)Otari MTR-12, Linn Sondek LP-12 with Krystal MC cartridge
  IP Logged
4krow
Seasoned Member
****


IMAGINE WHIRLLED
PEAS

Posts: 1607
Re: Starting build
Reply #1 - 09/08/18 at 17:55:10  
I would refer to the Edcor website to find that out. Also, a photo of the board would help in determining the wiring. The traces of the board will help to determine wiring too.  

 So far,I have found that these leads are as follows: Blue= Plate, Blue/white= screen, Red= B+.  The other 2 wires are speaker output with white being common, and Yellow being 8 ohm tap. Please, if anyone sees a correction, speak up.
Back to top
 
 
Decware 34I.3 integrated amp/Forte' 3 bass amp/Velodyne SMS-1 bass mngmnt system/Decware ZOB speakers/Audio Nirvana 8" bass drivers/Xiang Seng DAC/ LR Audio Computer/Rega Apollo R CDP/Emotiva ERC3 CDP/BPT 3.0 power cond.
  IP Logged
Pages: 1
Send Topic Print
Forums › SUPPORT FORUMS FOR ZKITS › ZKIT 2 Support forum ‹ Previous topic | Next topic ›

UPLOAD IMAGES HERE





Forums » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.


Source Forge