Forums - Print Page

Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl
SUPPORT FORUMS FOR ZKITS >> ZKIT 2 Support forum >> Starting build
https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1536360682

Message started by Falconer on 09/07/18 at 23:51:22

Title: Starting build
Post by Falconer on 09/07/18 at 23:51:22

I am looking at the circuit board to wire in the Edcor GXSE txf. The board has red and blue labled, the white & violet are the ouput, what does the white/blue connect to?

Title: Re: Starting build
Post by 4krow on 09/08/18 at 17:55:10

I would refer to the Edcor website to find that out. Also, a photo of the board would help in determining the wiring. The traces of the board will help to determine wiring too.

So far,I have found that these leads are as follows: Blue= Plate, Blue/white= screen, Red= B+. The other 2 wires are speaker output with white being common, and Yellow being 8 ohm tap. Please, if anyone sees a correction, speak up.