Welcome, Guest. Please Login or Register
Decware Audio Forums
12/05/24 at 10:58:24 




Most recent 50 posts

Pages: 1 2 3 4
Send Topic Print
Ways to improve sound quality of The MYSTERY AMP ! (Read 168256 times)
vyokyong
Seasoned Member
****




Posts: 169
Ways to improve sound quality of The MYSTERY AMP !
08/27/14 at 10:09:49
 
Hi All,

I would like to have all commends or ideas of how to improve sound quality of the Mystery Amp in one place. So that members who are interested can be shared his or her experience with other members in order to benefits to all.

Thanks in advance for all member's value experience to participate in.

I would like to start with :

Improve Signal Path by get rid of brass alloy in RCA female plug and Speaker binding posts.

We have to thanks Steve for great ZMA and most reasonable price. However there are some cost constrains to manage in order to get ZMA cost attractive and reachable price for general audiophiles.

But some components are weak points which we can improve by replace them with high quality or exotic components, particularly the components in signal path.

The RCA female jack and Speaker binding posts are over looked by general audiophiles. They are one critical components in signal path. There are new changing in RCA female jack and Speaker binding posts design by using low mass materials together with pure silver or pure copper at the signal lead path instead of conventional copper alloy or brass material. The reason to change is that copper alloy or brass causes signal distortion and blur or mud sound transparency and 3D image.

I have done on line research and believe this idea. Then I did change RCA female jack in Zen Switching Box which I use together with ZMA to be WBT Next Gen Ag 0210 pure silver. And I change speaker binding posts in ZMA to be WBT Next Gen 0705 pure copper. The sound quality improvement is phenomenal. It is open my eye and worth every penny even though WBT is very expensive. Please read below link. I get same experience as his.

http://forum.audiogon.com/cgi-bin/fr.pl?fcabl&1102955411&read&keyw&zzwbt...

http://forum.audiogon.com/cgi-bin/fr.pl?fcabl&1109098249  
Back to top
 

photo_2_002.JPG

Audio Note DAC3.1 Custom modded to 4.1, DIY Duelund wire RCA IC, Offramp 5 USB SPDIF converter, Mac Mini, Amarra Symphony player,
Zen Mystery Amp. MIT Oracle speaker wire, Avalon Eidolon Diamond speakers. Coincident Statement preamp, Martin Logan Depth subwoofer
  IP Logged
vyokyong
Seasoned Member
****




Posts: 169
Re: Ways to improve sound quality of The MYSTERY AMP !
Reply #1 - 08/27/14 at 10:14:23
 
Zen Switching Box after upgrade with WBT RCA female jacks. I think that ZMA owner who also uses Zen switching box as in put selector should consider to do this upgrade. It is a must since Zen switching box is a weakest link in audio chain system. You will feel like get new sound level of ZMA when you did upgrade.
Back to top
 

photo_5.JPG

Audio Note DAC3.1 Custom modded to 4.1, DIY Duelund wire RCA IC, Offramp 5 USB SPDIF converter, Mac Mini, Amarra Symphony player,
Zen Mystery Amp. MIT Oracle speaker wire, Avalon Eidolon Diamond speakers. Coincident Statement preamp, Martin Logan Depth subwoofer
  IP Logged
vyokyong
Seasoned Member
****




Posts: 169
Re: Ways to improve sound quality of The MYSTERY AMP !
Reply #2 - 08/27/14 at 10:18:45
 
WBT Next Gen 0705 speaker binding post pure copper signal path. Please check carefully that it is pure copper or pure silver in signal path or not? The old version WBT uses copper alloy or brass even it is coated with gold or silver. It destroys sound transparency, micro-detail and dynamic.
Back to top
 

photo_3.JPG

Audio Note DAC3.1 Custom modded to 4.1, DIY Duelund wire RCA IC, Offramp 5 USB SPDIF converter, Mac Mini, Amarra Symphony player,
Zen Mystery Amp. MIT Oracle speaker wire, Avalon Eidolon Diamond speakers. Coincident Statement preamp, Martin Logan Depth subwoofer
  IP Logged
vyokyong
Seasoned Member
****




Posts: 169
Re: Ways to improve sound quality of The MYSTERY AMP !
Reply #3 - 08/27/14 at 10:21:22
 
ZMA after upgrade with WBT Next Gen 0705 pure copper. I highly recommend to upgrade at first priority. It is one of most worth upgrade I did.
Back to top
 

photo_4_001.JPG

Audio Note DAC3.1 Custom modded to 4.1, DIY Duelund wire RCA IC, Offramp 5 USB SPDIF converter, Mac Mini, Amarra Symphony player,
Zen Mystery Amp. MIT Oracle speaker wire, Avalon Eidolon Diamond speakers. Coincident Statement preamp, Martin Logan Depth subwoofer
  IP Logged
busterfree
Seasoned Member
****




Posts: 433
Re: Ways to improve sound quality of The MYSTERY AMP !
Reply #4 - 09/01/14 at 18:01:17
 
I think it would be great to see these aftermarket parts offered by Decware. Or, maybe they can install if I send them the parts. I am not comfortable doing the work myself.
Back to top
 
 
  IP Logged
vyokyong
Seasoned Member
****




Posts: 169
Re: Ways to improve sound quality of The MYSTERY AMP !
Reply #5 - 09/03/14 at 09:53:10
 
My upgrade plan of ZMA has 3 sections;

1) Upgrade signal path by changing factory's RCA female jacks, Speaker binding posts and signal wire for maximize efficient flow of signal and minimize distort of signal. If we use car racing system to compare. This section is like making high speed road for racing car. If the road is not good, car cannot run as their highest speed. If the signal path is not superb high resolution and superb transparency, your expensive components cannot shine in term of transparency, speed, sound stage, focus image, transient and dynamics. It really affects all key attributes of sound quality. It is first priority.
2) Upgrade power supply section by changing factory IEC inlet and adding super high quality transient load decoupling capacitor for maximize power. It affects to transient, authority, speed, PRAT, dynamic and bass impact. This section is like fuel for racing car.
3) Upgrade key components, for example capacitors and resistors in signal path. This section is like engine, gears and brakes in racing car.

If you prepare signal path well but your section of 2 and 3 are ordinary, not thing special will be happened. It will have ordinary sound. But if you have section 2 and 3 well, but section 1 is poor then all section 2 and 3 cannot be shined. Or the sound quality is poor because of section 1.  If you have section 1 well, all section 2 and 3 are well too. The section 2 and 3 will be shined as their full potential.

This time, I upgrade resistor in signal path of switching box to be 10K Vishay VAR series 'naked" Foil Resistors. (aka. Texas Components TX2575 or Charcroft Electronics CAR Series). The result is impressive and highly recommended because total cost is not high. It is only USD 51.04 (4 resistors @ cost of USD 12.76 each) I confirm same result as Dgarretson got as below;

08-11-08: Dgarretson
What is remarkable about TX2575 in signal path(replacing Caddock MK132 and Caddock TF020/USF340, which had previously replaced Roederstein and generic carbon comp), is how much more detail & nuance of pitch & timbre TX2575 reveals across the entire spectrum, without sounding in any way thin or sterile. That said, these resistors eliminated bass slurring that some might consider warmth. There is also a blackness behind an airy, resolving yet smooth HF, that I want to believe is an attribute of a quieter resistor.

http://forum.audiogon.com/cgi-bin/fr.pl?htech&1218474065&openfrom&1&...

http://www.diyaudio.com/forums/parts/119229-vishay-audio-resistors.html

http://www.higas.net/audio-hifi/audio-reviews/vishay-var-z-foil-review/
Back to top
 

photo_1_002.JPG

Audio Note DAC3.1 Custom modded to 4.1, DIY Duelund wire RCA IC, Offramp 5 USB SPDIF converter, Mac Mini, Amarra Symphony player,
Zen Mystery Amp. MIT Oracle speaker wire, Avalon Eidolon Diamond speakers. Coincident Statement preamp, Martin Logan Depth subwoofer
  IP Logged
vyokyong
Seasoned Member
****




Posts: 169
Re: Ways to improve sound quality of The MYSTERY AMP !
Reply #6 - 09/03/14 at 09:56:15
 
The picture of resistors in signal path of switching box, before changing.
Back to top
 

photo_4_002.JPG

Audio Note DAC3.1 Custom modded to 4.1, DIY Duelund wire RCA IC, Offramp 5 USB SPDIF converter, Mac Mini, Amarra Symphony player,
Zen Mystery Amp. MIT Oracle speaker wire, Avalon Eidolon Diamond speakers. Coincident Statement preamp, Martin Logan Depth subwoofer
  IP Logged
Lonely Raven
Seasoned Member
****


Jack of all Trades,
Master of None

Posts: 3567
Re: Ways to improve sound quality of The MYSTERY AMP !
Reply #7 - 09/04/14 at 06:13:27
 

I've heard of those resistors before - I wish they were 1 watt so I could use them in some of my guitar amps that call for 1 watt resistors, that I want to get a little more detail out of.
Back to top
 
 
WWW Lonely Raven   IP Logged
stone_of_tone
Seasoned Member
****


Listen Often/Listen
Deep

Posts: 3217
Re: Ways to improve sound quality of The MYSTERY AMP !
Reply #8 - 09/04/14 at 16:22:56
 
WBT-0102Ag RCA with my Kimber Select KS1030 Interconnects.

I can certainly appreciate how the poster in the first Audiogon thread, ...knows how good the Kimber Select 1030 is. I run a pair from my DAC to CSP3, an then a pair to my ZMA with WBT-0102Ag RCA. My new 2nd pair (.75 meter) from the CableCo, are burning in beautifully.

With the WBT-0102Ag RCA....an the ZMA as good as it is. For me?! If it ain't broke....don't fix it.
Back to top
 
 

Room Treats-M.Green & mine
Sony TPort
Illuminati D60
Shunyata Z-Alpha DigPcord
Decware ZDSD DAC
Kimber Select KS1030
XLOProPcord
Decware ZMA/25th Mods
Kimber Select KS6063
Acoustic Zen Adagio/Modified
Kimber PK10 Palladian from wall
to PS Audio P3
  IP Logged
vyokyong
Seasoned Member
****




Posts: 169
Re: Ways to improve sound quality of The MYSTERY AMP !
Reply #9 - 09/05/14 at 02:37:19
 
Hi Stone of tone.

I agree with you. It is a revolution in sound quality, if the alloy metals in signal path of connectors (Male and Female RCA jack, Speaker binding posts of Amp and Spade of speaker wire and binding posts of speaker) are replaced with pure copper or pure silver metals.

If I have to buy new Zen Mystery Amp again, the first thing I do is that I will change female RCA jacks and speaker binding posts to be WBT Next Gen pure silver. The ZMA's sound quality is not just better but it moves to another level of sound quality. Now I am considering to replace my WBT male RCA (old design version which uses alloy metal in signal path) of my MIT Oracle interconnect cable to be WBT -0102 Ag RCA.
Back to top
 
 

Audio Note DAC3.1 Custom modded to 4.1, DIY Duelund wire RCA IC, Offramp 5 USB SPDIF converter, Mac Mini, Amarra Symphony player,
Zen Mystery Amp. MIT Oracle speaker wire, Avalon Eidolon Diamond speakers. Coincident Statement preamp, Martin Logan Depth subwoofer
  IP Logged
vyokyong
Seasoned Member
****




Posts: 169
Re: Ways to improve sound quality of The MYSTERY AMP !
Reply #10 - 09/05/14 at 09:49:17
 
I forgot to provide the solder I use. It is ;

Mundorf Silver/Gold Solder

Silver/Gold is added in the M-SOLDER which itself is a pure tin copper compound. Silver is used for better conductivity and retaining superior sound qualities. Gold is applied to safeguarding the sound properties. Specifications: 95.5%Sn/0.7%Cu/3.8%AgAu (AgAu=99%Silver1%Gold) - 1mm Dia. - 2.5% Flux - Lead and Cadmium Free.
Back to top
 

MUNDORF-70429.jpg

Audio Note DAC3.1 Custom modded to 4.1, DIY Duelund wire RCA IC, Offramp 5 USB SPDIF converter, Mac Mini, Amarra Symphony player,
Zen Mystery Amp. MIT Oracle speaker wire, Avalon Eidolon Diamond speakers. Coincident Statement preamp, Martin Logan Depth subwoofer
  IP Logged
stone_of_tone
Seasoned Member
****


Listen Often/Listen
Deep

Posts: 3217
Re: Ways to improve sound quality of The MYSTERY AMP !
Reply #11 - 09/05/14 at 15:33:59
 
Even though I said: "If it ain't broke don't fix it". I am seriously considering this MOD vyokyong. Both the RCA Inputs on my ZMA an the 8ohm Speaker Binding Posts with the Silver Solder, replaced with WBT's best Ag's. I am going to price it out.

Thanks for posting this vyokyong. I will have my guy at Midwest Speaker (most excellent solder slinger) do the MOD. Sometime between now an the end of November I should be able to get it done. If, I decide to do it.

In for a penny ~ in for a pound. Nice tweaks.

By the way, are/were you in the process of doing both the 8ohm an 4ohm Speaker Taps at the time of the picture posted?
Back to top
 
 

Room Treats-M.Green & mine
Sony TPort
Illuminati D60
Shunyata Z-Alpha DigPcord
Decware ZDSD DAC
Kimber Select KS1030
XLOProPcord
Decware ZMA/25th Mods
Kimber Select KS6063
Acoustic Zen Adagio/Modified
Kimber PK10 Palladian from wall
to PS Audio P3
  IP Logged
vyokyong
Seasoned Member
****




Posts: 169
Re: Ways to improve sound quality of The MYSTERY AMP !
Reply #12 - 09/05/14 at 16:30:59
 
Hi Stone of tone,

Glad that you will do mod as I do now. I can assure you that you will feel regret if you don't do mod after you get your mod ZMA back.

However I would like you to follow my step by step of mod in each section. So that you can have over all view of mods and their effects to sound quality. And then you can decide to do your mod of ZMA in one shot. That is the reason that I inform of my total mod plan because I am afraid that someone decides to do mod now and find out later that there are more mods that he wants to do.  And now his ZMA will have second time of mod.

The reason that I don't do one shot of mods because I want to learn the effects to sound quality of each parts of components. Even though I have to disassemble ZMA many many times. If it is not worth to do in any parts, I will report so that you can avoid to spend money in that parts. However until now I am very happy with the results. I will report more, please be waiting. Have a great weekend.
Back to top
 
 

Audio Note DAC3.1 Custom modded to 4.1, DIY Duelund wire RCA IC, Offramp 5 USB SPDIF converter, Mac Mini, Amarra Symphony player,
Zen Mystery Amp. MIT Oracle speaker wire, Avalon Eidolon Diamond speakers. Coincident Statement preamp, Martin Logan Depth subwoofer
  IP Logged
vyokyong
Seasoned Member
****




Posts: 169
Re: Ways to improve sound quality of The MYSTERY AMP !
Reply #13 - 09/05/14 at 16:55:54
 
Hi Stone of tone,

I did only 4 ohm speaker binding posts because I have no plan to change my Avalon Avatar speakers which is 6 ohms. I feel connect with 4 ohm binding post, sound is better than 8 ohm binding post. And the cost of WBT binding post is expensive. I will change only the one I use now. I am in different situation than you because I do mod by myself. I can do it later if I want. But you have to send out for some one to do for you. And you have many speakers to use then you may need to do both.

I forgot that the holes of current binding posts are too close to each other that two sets of WBT binding posts cannot be installed together. You can see from my posted picture. I have to move location of binding post to both ends to solve the limited space. And I have to use small piece of plastic to insert between binding post of WBT and current one in order to make sure that they are not contacted each other to have short circuit in amp's operation. Then you have to decide to install only one set.
Back to top
 
 

Audio Note DAC3.1 Custom modded to 4.1, DIY Duelund wire RCA IC, Offramp 5 USB SPDIF converter, Mac Mini, Amarra Symphony player,
Zen Mystery Amp. MIT Oracle speaker wire, Avalon Eidolon Diamond speakers. Coincident Statement preamp, Martin Logan Depth subwoofer
  IP Logged
vyokyong
Seasoned Member
****




Posts: 169
Re: Ways to improve sound quality of The MYSTERY AMP !
Reply #14 - 09/05/14 at 17:12:28
 
From posted picture,  the outside end of both WBT binding posts are 4 ohms. The inner pair of factory binding posts are 8 ohms. The soldered internal output wires are rearrange to follow new location of binding posts.
Back to top
 

image_019.jpg

Audio Note DAC3.1 Custom modded to 4.1, DIY Duelund wire RCA IC, Offramp 5 USB SPDIF converter, Mac Mini, Amarra Symphony player,
Zen Mystery Amp. MIT Oracle speaker wire, Avalon Eidolon Diamond speakers. Coincident Statement preamp, Martin Logan Depth subwoofer
  IP Logged
glineus
Verified Member
**




Posts: 37
Re: Ways to improve sound quality of The MYSTERY AMP !
Reply #15 - 09/05/14 at 19:10:59
 
Hi Vyokyong,

I have been following every step of your mod intently as I believe the Tori 11 MK1V will benefit from this mod as well. Wouldn't it?  But if implemented would these modification void future warranty?

Happy listening
Back to top
 
 
  IP Logged
vyokyong
Seasoned Member
****




Posts: 169
Re: Ways to improve sound quality of The MYSTERY AMP !
Reply #16 - 09/06/14 at 16:05:36
 
Hi Glineus,

Actually these mod information will be benefit to all components from phono preamp, preamp, DAC, CD player, etc. And yes, all mods affect to void factory warranty.

If you don't want to void the warranty, then all mods should be done by factory. Some companies now offer upgrade many level options for customers to select. I think that Steve should consider upgrade package offering to customers also. It would be win-win for both Zen loyalty customers and Decware company.

My upgrade plan is coming from studying of other companies' upgrade package of what they do.
Back to top
 
 

Audio Note DAC3.1 Custom modded to 4.1, DIY Duelund wire RCA IC, Offramp 5 USB SPDIF converter, Mac Mini, Amarra Symphony player,
Zen Mystery Amp. MIT Oracle speaker wire, Avalon Eidolon Diamond speakers. Coincident Statement preamp, Martin Logan Depth subwoofer
  IP Logged
vyokyong
Seasoned Member
****




Posts: 169
Re: Ways to improve sound quality of The MYSTERY AMP !
Reply #17 - 09/06/14 at 16:23:20
 
Hi Glineus,  

Your total cost of Torii MK IV plus mod cost may be equal to buy Zen Mystery Amp. Then it is a good question to debate that it is worth to mod Torii MK IV or just buy ZMA at the first time, not Torii MK IV.

Then the answer will depend on sound quality of moded Torii MK IV. If its sound quality is better than ZMA (un-mod).  Then it is better to buy Torii and do mod.

I don't hear Torii MK IV before. However I believe that Torii MK IV after mod will have sound quality better than ZMA. Just my believe after I progress mod with ZMA. Now I am listening to Mod ZMA of section 2, power supply unit mod. I will report soon.
Back to top
 
 

Audio Note DAC3.1 Custom modded to 4.1, DIY Duelund wire RCA IC, Offramp 5 USB SPDIF converter, Mac Mini, Amarra Symphony player,
Zen Mystery Amp. MIT Oracle speaker wire, Avalon Eidolon Diamond speakers. Coincident Statement preamp, Martin Logan Depth subwoofer
  IP Logged
glineus
Verified Member
**




Posts: 37
Re: Ways to improve sound quality of The MYSTERY AMP !
Reply #18 - 09/07/14 at 01:29:01
 
Hello Vyokyong,

You have surely introduced a very sensitive point there. Is the Zima a better amplifier than the Tori MK 1V or is each amplifier good in it's own way?  My speakers are the Zu Definitions that are 101db sensitive so I do not necessarily need the extra amplifier power. But the Zima has certainly aroused my curiosity.

 I follow the Zima forum daily as the owners discuss the possessive attributes of this amplifier, one of which is that it is built with oversize caps that makes the use of a power re generator redundant.  Is the Zima a special amp?

Good Listening
Back to top
 
 
  IP Logged
vyokyong
Seasoned Member
****




Posts: 169
Re: Ways to improve sound quality of The MYSTERY AMP !
Reply #19 - 09/07/14 at 06:20:36
 
Hi Stone of tone,

Here is the picture of before mod of speaker binding posts of ZMA. From left hand, it starts with 3 wires, one green and two black, connected with negative binding post of 4 ohm. (Black post). Next is red binding post (positive) of 4 ohm. It is connected with 2 bluish green wires. The rest are 8 ohm binding posts.
Back to top
 

photo_1_003.JPG

Audio Note DAC3.1 Custom modded to 4.1, DIY Duelund wire RCA IC, Offramp 5 USB SPDIF converter, Mac Mini, Amarra Symphony player,
Zen Mystery Amp. MIT Oracle speaker wire, Avalon Eidolon Diamond speakers. Coincident Statement preamp, Martin Logan Depth subwoofer
  IP Logged
vyokyong
Seasoned Member
****




Posts: 169
Re: Ways to improve sound quality of The MYSTERY AMP !
Reply #20 - 09/07/14 at 06:43:01
 
Here is the picture of same channel speaker binding post of previous picture. But it is after mod. It is placed at the bottom instead of previous picture which is placed at the top. Then it starts from right hand. The first binding post is black post (negative) of 4 ohm as same as before mod. The connected wires 3 wires (one green and two black wires). The second post from right is red binding post (positive) of 8 ohm. The old post of this location is red post of 4 ohm. The red post (positive) of 4 ohm is moved to the forth post from right. The third post from right is the same, no change. Hope this will to clarify more.
Back to top
 

photo_1_005.JPG

Audio Note DAC3.1 Custom modded to 4.1, DIY Duelund wire RCA IC, Offramp 5 USB SPDIF converter, Mac Mini, Amarra Symphony player,
Zen Mystery Amp. MIT Oracle speaker wire, Avalon Eidolon Diamond speakers. Coincident Statement preamp, Martin Logan Depth subwoofer
  IP Logged
vyokyong
Seasoned Member
****




Posts: 169
Re: Ways to improve sound quality of The MYSTERY AMP !
Reply #21 - 09/08/14 at 05:59:47
 
This time, I replace factory signal wire in Zen switching box with Duelund Hook Up wire 2.0, silver foil & silk/oil, Version 2, USD 50.10 per foot and get 50% discount, net USD 25.10 per foot. This is end of first section of signal path upgrade. Please be noted that I use Zen switching box as inputs selector for my ZMA. Because ZMA allow only 1 input. I need at least 3 inputs for my home theater, CD/DAC player and turntable. I still cannot replace internal signal wire in ZMA because the Duelund wire is not enough.

The result is phenomenal, it transforms my hifi system from very very good hifi sound to be like now the musicians are playing in my room! It provides more low level details and ambien sound to be heard. I believe that I feel like musicians are playing in my room when the system can provides these low level details and ambien sound to be heard.  Before these, I still think that my system provides very high resolution already. But that is misunderstood. The low level details and ambien sound is different from high resolution sound. The low level details and ambien sound means that you can hear all low level of loudness of sound, like whisper, clearly. I am surprise that I play CD record and now I can hear all low level details which I have never heard before. Is it same as DSD playing of PW Direct Stream to claim that you will hear what you don't hear before in CD, I don't know. This is the first time, I feel that musicians are playing in my listening room with me.

Remark : The picture is taken  before I finish all wire replacement with Duelund Hook Up wire 2 Version 2. The small white cable is factory wire (The factory provides 1 wire per channel. But in pictures, there is two wires per channel because I move the replaced factory wire to be used in channel of no Duelund hook up wire), the flat silver wire with silk black cover is Duelund Hook Up wire 2, version 2.
Back to top
 

photo_2_003.JPG

Audio Note DAC3.1 Custom modded to 4.1, DIY Duelund wire RCA IC, Offramp 5 USB SPDIF converter, Mac Mini, Amarra Symphony player,
Zen Mystery Amp. MIT Oracle speaker wire, Avalon Eidolon Diamond speakers. Coincident Statement preamp, Martin Logan Depth subwoofer
  IP Logged
vyokyong
Seasoned Member
****




Posts: 169
Re: Ways to improve sound quality of The MYSTERY AMP !
Reply #22 - 09/08/14 at 06:11:36
 
Wire comparison between Duelund Hook Up wire 2 version 2 and factory silver wire inside Zen switching box.

More review of Duelund Hook Up wire.

http://www.hificollective.co.uk/kits/pdf/duelund_wbt_interconnect_review.pdf

http://forums.stevehoffman.tv/threads/a-discussion-about-high-end-hook-up-wire.2...

http://www.audionervosa.com/index.php?topic=4563.0
Back to top
 

photo_63_001.JPG

Audio Note DAC3.1 Custom modded to 4.1, DIY Duelund wire RCA IC, Offramp 5 USB SPDIF converter, Mac Mini, Amarra Symphony player,
Zen Mystery Amp. MIT Oracle speaker wire, Avalon Eidolon Diamond speakers. Coincident Statement preamp, Martin Logan Depth subwoofer
  IP Logged
Lonely Raven
Seasoned Member
****


Jack of all Trades,
Master of None

Posts: 3567
Re: Ways to improve sound quality of The MYSTERY AMP !
Reply #23 - 09/08/14 at 16:05:31
 

All of that looks like some great looking parts!

I'm looking forward to what else you might do.
Back to top
 
 
WWW Lonely Raven   IP Logged
vyokyong
Seasoned Member
****




Posts: 169
Re: Ways to improve sound quality of The MYSTERY AMP !
Reply #24 - 09/10/14 at 15:05:32
 
After factory wires are replaced by Duelund hook up wire, the sound quality is huge improved.  It makes me curious to do comparison sound quality between connecting CD player direct to ZMA without zen switching box and connecting thru Zen switching box.

The result of connecting direct to ZMA without mod zen switching box, the sound quality is close to connect to mod zen switching box. The only different is connect direct has more PRAT, speed and dynamic. It may cause by longer signal path when mod zen switching box is used. The signal path length is 3 meters when using switching box. (Two 1.5 meter IC.). While connect direct to ZMA is only 1.5 meter (one 1.5 meter IC). It means that the zen switching box after mod is very neutral in sound quality. And the mid range sound is more clear and vivid when using mod zen switching box. I think that Duelund hook up wire may have influent in mid range sound which is strong point of Duelund hook up wire.

I had tried before mod of ZMA and zen switching box when I first got ZMA. The sound quality drop very little from direct connect compared to connect thru zen switching box. That is the reason I can accept and use zen switching connect between ZMA and other inputs. But after mod of ZMA, details of sound has huge improve. I feel that zen switching box before mod can be bottle neck or weakest link in my hifi chain. Then I do A/B comparison between original input channel without mod and input channel after mod of zen switching box. The result is huge different. It proves that zen switching box is the weakest link. If you use with mod ZMA, I highly recommend you to do mod of zen switching box also. Or using preamp CPS3, but you have to buy more one good power cable. For me, I am happy with mod zen switching box. I don't want to buy more one power cable. And preamp CPS3 has only two inputs which is not enough for me.
Back to top
 
 

Audio Note DAC3.1 Custom modded to 4.1, DIY Duelund wire RCA IC, Offramp 5 USB SPDIF converter, Mac Mini, Amarra Symphony player,
Zen Mystery Amp. MIT Oracle speaker wire, Avalon Eidolon Diamond speakers. Coincident Statement preamp, Martin Logan Depth subwoofer
  IP Logged
vyokyong
Seasoned Member
****




Posts: 169
Re: Ways to improve sound quality of The MYSTERY AMP !
Reply #25 - 09/11/14 at 15:13:13
 
Next phase is to mod the power supply unit of ZMA. I start with replacing factory IEC inlet with Furutech IEC inlet FI-03 (R) Rhodium plated. It is exactly same size as factory IEC with 5x20 mm fuse holding.

The effect to sound quality;
Plus side : 1) sound stage is more 3D, particularly the depth dimension. It is more expand to front and back stage with layers of instruments. It is not make singer vocal sound forward to your face. It is still same location. But you feel the music band is not flat 2D.
                2) speed, dynamic and bass control is better, not subtle, you feel different. But it is more lean. Some will prefer gold plated with more warm sound.

Minus side:  the magic of all details gone or disappear. The feel of band playing inside the room is gone. It is just like listen to very good hifi. It is very disappoint. Its sound is congest like new amp, not burn in yet.

I hope that it may be that Furutech IEC inlet is new and burn-in will help to smooth the sound congest out.

http://forum.audiogon.com/cgi-bin/fr.pl?ddgtl&1225183019
http://www.drhifi.net.au/Hi-Fi/Furutech%20Power%20Inlet/1.htm
Back to top
 
 

Audio Note DAC3.1 Custom modded to 4.1, DIY Duelund wire RCA IC, Offramp 5 USB SPDIF converter, Mac Mini, Amarra Symphony player,
Zen Mystery Amp. MIT Oracle speaker wire, Avalon Eidolon Diamond speakers. Coincident Statement preamp, Martin Logan Depth subwoofer
  IP Logged
Lonely Raven
Seasoned Member
****


Jack of all Trades,
Master of None

Posts: 3567
Re: Ways to improve sound quality of The MYSTERY AMP !
Reply #26 - 09/11/14 at 15:55:17
 
I mentioned to Steve that I was unhappy with the IEC inlet - mostly because it doesn't seem to grip the power cords very well. He agreed with me and said he's tried many different ones, and the one that's on the ZMA is the best, reasonably priced IEC he could find.

If anyone knows of one that's better, grips the cables well, and isn't so loose, He said he'd like to hear about it.

I wouldn't put it on a ZMA, but I'd probably try it in some of my other gear, but I found this 99% silver bladed IEC inlet doing some searches.



Back to top
 
 
WWW Lonely Raven   IP Logged
deucekazoo
Seasoned Member
****




Posts: 461
Re: Ways to improve sound quality of The MYSTERY AMP !
Reply #27 - 09/11/14 at 16:18:32
 
Have you guys thought about getting rid of the IEC and just going straight into the amp. I know some like their special power cables, but it would seem you could take the end off your preferred cable and just run that into the amp. This way bypassing the IEC and saving some money. I am a fan of the least amount of connections. You could always create a plate with a grommet to cover the existing hole, running the cable in. I know IEC are used for easy removal if you are moving your components around but how often do you do that. The only time I do that is if I let someone borrow something.  ;)
I have thought about running wires straight in a few times, especially with RCA cables. I hate RCA connections and their prices. This would make it real hard to move stuff around and try different cables, but once you find which cable you like, bypass the weak link RCA or IEC. It would be harder to live with on RCA cables but easy with power cables.
Back to top
 
 
  IP Logged
Lon
Seasoned Member
****


"Love without
guts is
worthless!"
Philip K. Dick

Posts: 24866
Re: Ways to improve sound quality of The MYSTERY AMP !
Reply #28 - 09/11/14 at 17:15:27
 
vyokyong,
I bet in a week or so it will sound awesome. I replaced an IEC inlet on one of my SACD players and it didn't sound great out of the box, but did in a week.
Back to top
 
 

HR-1,ZBIT,ZROCK2,SEWE300B,CSP3-25mod; Rega RP3 all GrooveTracer mods;PSAudio:PST+DSD, DAC Mk II, P15,NPC,PowerBases,AC-12 pwr cbls, Reference spkrcbls; Mapleshade SamsonV3; VooDoo:Cremona+Amati interconnects, IsoPods; headphones: Sennheiser HD800S,ZMF Ori,Oppo PM1
  IP Logged
Lonely Raven
Seasoned Member
****


Jack of all Trades,
Master of None

Posts: 3567
Re: Ways to improve sound quality of The MYSTERY AMP !
Reply #29 - 09/11/14 at 17:31:53
 
Quote:
Have you guys thought about getting rid of the IEC and just going straight into the amp. I know some like their special power cables, but it would seem you could take the end off your preferred cable and just run that into the amp. This way bypassing the IEC and saving some money. I am a fan of the least amount of connections. You could always create a plate with a grommet to cover the existing hole, running the cable in. I know IEC are used for easy removal if you are moving your components around but how often do you do that. The only time I do that is if I let someone borrow something.  ;)
I have thought about running wires straight in a few times, especially with RCA cables. I hate RCA connections and their prices. This would make it real hard to move stuff around and try different cables, but once you find which cable you like, bypass the weak link RCA or IEC. It would be harder to live with on RCA cables but easy with power cables.


Oh yeah, I've done that for speakers before. From the amp, directly to the driver, no connectors. Most of my (vintage) guitar amps came with two prong cords going directly to the Power Transformer in the chassis. I've replaced them with decent, server grade computer power cables.

If I was building my own gear, I would absolutely be that nutty and just remove all connectors, even from component to component.

Also, IEC connectors came about as a result of UL certifications. Something in the UL guidelines states that a device needs to be able to support itself by the cable in case it falls off a shelf. You don't want the cable breaking and leaving hot wires flailing about. So the IEC connector was the work around to this. Just a little bit of history.  :)

Back to top
 
 
WWW Lonely Raven   IP Logged
Syd
Seasoned Member
****




Posts: 1534
Re: Ways to improve sound quality of The MYSTERY AMP !
Reply #30 - 09/11/14 at 18:25:29
 
When I get the cables coming in at just the right angle it`s ok but still some play. Out of 4 amps I usually have an elastic band going around the transformer and cord on one to stop it flopping back and losing the connection. The cables always want to pull back on the sockets. I`ve thought about 90 degree male sockets on the cords but they would probably ping up. Just needs a brass torsion clip to keep it tight if done from manufacture. I should have wrapped a piece of tape around them by now.
Back to top
 
 

Decware: Rachaels x 2 bridged, C. SP2+, ZP3, ZMC1, DHC-1 pw/cbl`s Michell Orbe + SME V + M.Benz LP s, Arcam CD33, Nakamichi LX5, Lowther acoustas DX2`s, WE 16g sp/cbl`s, Isotek mains substation, M & K subwoofer, Belden 8402 interconnects.
  IP Logged
deucekazoo
Seasoned Member
****




Posts: 461
Re: Ways to improve sound quality of The MYSTERY AMP !
Reply #31 - 09/11/14 at 18:58:33
 
"Also, IEC connectors came about as a result of UL certifications. Something in the UL guidelines states that a device needs to be able to support itself by the cable in case it falls off a shelf. You don't want the cable breaking and leaving hot wires flailing about. So the IEC connector was the work around to this. Just a little bit of history.  :)"

I did not know that. Thanks for the history lesson.
Back to top
 
 
  IP Logged
vyokyong
Seasoned Member
****




Posts: 169
Re: Ways to improve sound quality of The MYSTERY AMP !
Reply #32 - 09/12/14 at 02:33:37
 
Top view picture of Furutech FI-03 (R) Rhodium Plate.  price @USD 28

I cannot find other brands to have fuse holder and same size as factory IEC inlet. I use Furutech IEC inlet FI-03 because of same size as factory IEC inlet. It is most convenient to do replacement.

According to factory IEC seems does not grip to power cord well, Furutech IEC does not grip the power cord well as same as factory IEC. I think that because of vertical angle fit, the power cord nowadays is so heavy which make little play fit in IEC. (or IEC is to shallow). If it is fitted in horizontal angle, it should not have problem.  

Below is the link of Furutech to describe sound characteristic of each plated materials, Rhodium, Gold, Silver and Copper.
http://www.furutech.com/technology/
Back to top
 

photo_2_004.JPG

Audio Note DAC3.1 Custom modded to 4.1, DIY Duelund wire RCA IC, Offramp 5 USB SPDIF converter, Mac Mini, Amarra Symphony player,
Zen Mystery Amp. MIT Oracle speaker wire, Avalon Eidolon Diamond speakers. Coincident Statement preamp, Martin Logan Depth subwoofer
  IP Logged
vyokyong
Seasoned Member
****




Posts: 169
Re: Ways to improve sound quality of The MYSTERY AMP !
Reply #33 - 09/12/14 at 02:34:49
 
The bottom view of Furutech IEC inlet FI-03 (R) Rhodium plated. The Furutech IEC inlet is at right hand in picture.
Back to top
 

photo_1_004.JPG

Audio Note DAC3.1 Custom modded to 4.1, DIY Duelund wire RCA IC, Offramp 5 USB SPDIF converter, Mac Mini, Amarra Symphony player,
Zen Mystery Amp. MIT Oracle speaker wire, Avalon Eidolon Diamond speakers. Coincident Statement preamp, Martin Logan Depth subwoofer
  IP Logged
will
Seasoned Member
****




Posts: 3047
Re: Ways to improve sound quality of The MYSTERY AMP !
Reply #34 - 09/12/14 at 02:52:46
 
Thanks vyokyong for writing about the interesting explorations you are making. I have been thinking of this Furutech IEC for my MKIV for the same reasons as you. I suspect Lon is right, that it will sound great once burned in. I look forward to hearing how it changes. I suppose you are using a good fuse? I have really liked several audiophile fuses.
Back to top
 
 

All Modified: PSA-P5>DIY Strip/Shunyata Defender>RevolutionMacMini/Amarra-KTE Singxer/Gustardx20pro/ZBIT/ZR2/CSP3>LaoChen 300B/845>Omega SAHOMs/AudioSmile Tweeters,SVS Micro3000>Pi PCs and DIY PCs, ICs, USB, I2S, Speaker>SR and aluminum w ball bearing feet +
  IP Logged
vyokyong
Seasoned Member
****




Posts: 169
Re: Ways to improve sound quality of The MYSTERY AMP !
Reply #35 - 09/13/14 at 01:51:29
 
Thanks Lon and Will. I have solved the sound congest problem. I remembered that I uninstall two fuses from fuse holder when I disassemble factory  IEC inlet. I though that I may install two fuses back in Furutech IEC inlet by switching locations of fuses. The fuse in reserved box may be installed in operate fuse location while fuse in operate fuse location was installed in reserved fuse box. Then I switched two fuses location in Furutech IEC inlet and played music again. Yes, the sound sonic improve. It is more smooth, fast, dynamic and no more sound congest. But the magic of sound details is still not here. This means that fuse is needed to be burn in. The problem is caused by new fuse was switched to use instead of old fuse which is already played for 6 months. Every new Hi-Fi players, the sound is congest of first 100 hour playing. It may be caused by new fuse, not burned in yet.

I tried again to reverse poles of fuse. Yes, the magic of sound details come back now. But it is a little less than before changing IEC inlet. This means that fuse after burn in has direction of poles. If you reverse fuse pole direction, sound will change.

At this stage, I am happy with Furitech IEC inlet FI-3 (R) Rhodium plated. Unit price at USD 27, very little investment. It improves sound stage more 3D, depth expand to back and front, can feel layers of instruments. Image is more focus. Sound is faster, more dynamic and much better bass control. It is more dark background. But the sound is thinner, more lean, less warm.
Back to top
 

image_020.jpg

Audio Note DAC3.1 Custom modded to 4.1, DIY Duelund wire RCA IC, Offramp 5 USB SPDIF converter, Mac Mini, Amarra Symphony player,
Zen Mystery Amp. MIT Oracle speaker wire, Avalon Eidolon Diamond speakers. Coincident Statement preamp, Martin Logan Depth subwoofer
  IP Logged
will
Seasoned Member
****




Posts: 3047
Re: Ways to improve sound quality of The MYSTERY AMP !
Reply #36 - 09/13/14 at 22:41:51
 
This seems to be the case with all audiophile fuses I have tried. They sound different turned in the opposite direction. Once played a while, the Synergistic Research Reds show less of this if I recall, but still a difference. I wonder if perhaps the fuse will sound better the other way once the IEC inlet is burned in, detailed, but warmer and fuller.
Back to top
 
 

All Modified: PSA-P5>DIY Strip/Shunyata Defender>RevolutionMacMini/Amarra-KTE Singxer/Gustardx20pro/ZBIT/ZR2/CSP3>LaoChen 300B/845>Omega SAHOMs/AudioSmile Tweeters,SVS Micro3000>Pi PCs and DIY PCs, ICs, USB, I2S, Speaker>SR and aluminum w ball bearing feet +
  IP Logged
vyokyong
Seasoned Member
****




Posts: 169
Re: Ways to improve sound quality of The MYSTERY AMP !
Reply #37 - 09/15/14 at 14:31:35
 
Next step after finish install of Furutech IEC inlet is to bypassed Electrolytic caps with film caps!

There are many debates about is it effective to bypassed Electrolytic caps with film caps?

http://www.diyaudio.com/forums/power-supplies/126697-bypassing-psu-capacitors-ef...

http://www.head-fi.org/t/216167/why-are-electrolytic-caps-bypassed-with-film-cap...

I would like to try by using 10 uF/630 Volt Obligatto, Premium Gold capacitor to be parallel connected with current 47uF/ 500 Volts F&T electrolytic caps to see the result effects to sound quality? The caps price is USD 27.  You have to order in matched pair. I pay USD 1 fee per one matched pair.

I believe that electrolytic caps has slow charge and recharge rate (high ESR value) which cannot cope with high frequency range. The film caps has very low ESR value or very fast charge and recharge rate. Then film caps is used to bypassed electrolytic caps helps eliminate high ESR value of electrolytic caps. Even though ZMA has huge 4,400 uF per channel, but it is electrolytic caps. The bigger it is, the slow recharge rate or high ESR value it is.

This is from Jensen catalog of their caps:
The importance of attenuation and high
frequency behaviour.
No matter how fast the amplifiers signal
processing circuits are, you cannot utilize
that speed if your power supply is too slow
to follow rapid signal changes.
The power supply's reservoir capacitor
constitutes a vital element in the amplifier
chain, effecting the signals on the main
signal paths as well, because most power
amplifiers reservoir is conceptually placed
in series with the loudspeaker line.

The main issue is not only that the capacitor can give you enough charge and quickly enough, but the attenuation of the power supply toward the amplifier. In spite of the fact that the audio band is nominally 20 Hz -20 kHz, the stability of the amplifier and the overall sound quality is strongly influenced by reservoir capacitor behaviour at very high frequencies.
The function of the reservoir capacitor is not only to store energy, but also filtering, providing decoupling between the power supply and the amplifiers signal processing circuits. For energy storage a conventionally constructed aluminium electrolytic capacitor with sufficient Capacitance (F) x Voltage (V)/ Volume (cm3) ratio and satisfactory low ESR and inductivity at higher frequencies would be suitable. However the capacitors filtering characteristic plays a very important role in decoupling and suppressing unwanted transients and  i.e. digital high frequency noises.
Extremely low inductance makes excellent high frequency capabilities.
The high inductance value of a capacitor is particularly harmful when they are used for filtering at higher frequencies, as the impedance of a high capacitance capacitor over the resonance frequency - which is typically a few tens of kHz - is strongly dominated of the inductance of the capacitor winding.
Back to top
 

photo_64.JPG

Audio Note DAC3.1 Custom modded to 4.1, DIY Duelund wire RCA IC, Offramp 5 USB SPDIF converter, Mac Mini, Amarra Symphony player,
Zen Mystery Amp. MIT Oracle speaker wire, Avalon Eidolon Diamond speakers. Coincident Statement preamp, Martin Logan Depth subwoofer
  IP Logged
Lonely Raven
Seasoned Member
****


Jack of all Trades,
Master of None

Posts: 3567
Re: Ways to improve sound quality of The MYSTERY AMP !
Reply #38 - 09/15/14 at 16:42:16
 
vyokyong, do you happen to have any photos of the underside of your ZMA?

Since mine was the prototype, and yours is one of the final production ones, I'm wondering what slight differences/improvements yours might have.

I would love to see some circuit photos if you don't mind!
Back to top
 
 
WWW Lonely Raven   IP Logged
stone_of_tone
Seasoned Member
****


Listen Often/Listen
Deep

Posts: 3217
Re: Ways to improve sound quality of The MYSTERY AMP !
Reply #39 - 09/15/14 at 16:46:21
 
I'm continuing to follow too vyokyong. Thanks for your clarification in reply #19.

LR, in regards to your reply #29... . I can remember discussing years ago with some about why do premium cables matter when after all, they hit the binding posts of the Speakers an run up different wire to the Xover(s) an then to the Driver's. But, as we know, their is a difference to Speakers an Components....or I would not be putting at least 300 hours on my new Kimber Select 1030 IC RCA downstairs between my Rotel an XPA2. Then it comes back upstairs in the Listening Room for a Listen... . But, it would be cool to hear it all wired direct for fun!

Quite frankly, I do get (by comparison to my lesser cables), all the detail, transparency/musicality I'm accustomed to (when I went without a Pre for 12 years)...with the CSP3w/Jupiter Caps because of my Cabling.

Listening Room:
Room Treatments from Michael Green & Home brew
Sony as Transport
Illuminati D-60 (.5 meter)
Chord Chordette QuteHD DAC
Kimber Select KS1030 IC RCA (.75 meter)
Decware CSP3 w/Jupiter Caps
Kimber Select KS1030 IC RCA (.5 meter)
Decware Zen Mystery Amplifier
Kimber Select KS3035 Speaker Cable
Vintage Polk SDA1 Speakers (in Stereo)
XLO Pro Power Cords to CSP3 & ZMA
All four units plugged into Adcom AC-Enhancer 515
Back to top
 
 

Room Treats-M.Green & mine
Sony TPort
Illuminati D60
Shunyata Z-Alpha DigPcord
Decware ZDSD DAC
Kimber Select KS1030
XLOProPcord
Decware ZMA/25th Mods
Kimber Select KS6063
Acoustic Zen Adagio/Modified
Kimber PK10 Palladian from wall
to PS Audio P3
  IP Logged
Lonely Raven
Seasoned Member
****


Jack of all Trades,
Master of None

Posts: 3567
Re: Ways to improve sound quality of The MYSTERY AMP !
Reply #40 - 09/16/14 at 01:14:27
 
Quote:
Quite frankly, I do get (by comparison to my lesser cables), all the detail, transparency/musicality I'm accustomed to (when I went without a Pre for 12 years)...with the CSP3w/Jupiter Caps because of my Cabling.


That's quite an investment for me right now - otherwise I'd be calling Steve up and seeing how quickly I could get one. Especially since I'd have to add cables on top of that. I'm pretty sure my fine, DIY cables are no match for your Kimbers, or any real, built and tested by ear boutique cable geared towards transparency.

Hell, I already wired my walls with Zen Styx wire from the circuit panel to the outlet! If I ever get a dedicated room, you know I'm going to go all the way - wired point to point as many steps as I can!
Back to top
 
 
WWW Lonely Raven   IP Logged
vyokyong
Seasoned Member
****




Posts: 169
Re: Ways to improve sound quality of The MYSTERY AMP !
Reply #41 - 09/16/14 at 04:03:44
 
Hi Lonely Raven,

Here is picture of circuit of my ZMA. My ZMA's caps in signal path are V-Caps TFTF  (Fluoropolymer Film & Tin Foil) Series Capacitors. Because at that time, the 600V CRYO TREATED FLAT STACKED COPPER FOIL BEES WAX - SIGNAL CAPACITORS was out of stock. I requested Steve to use V-caps instead and I was willing to pay extra cost. He was very kind to installed V-caps TFTF series for me with no extra cost. My ZMA may be only one ZMA with V-caps TFTF in market!
Back to top
 

IMG_6484_-_Copy.JPG

Audio Note DAC3.1 Custom modded to 4.1, DIY Duelund wire RCA IC, Offramp 5 USB SPDIF converter, Mac Mini, Amarra Symphony player,
Zen Mystery Amp. MIT Oracle speaker wire, Avalon Eidolon Diamond speakers. Coincident Statement preamp, Martin Logan Depth subwoofer
  IP Logged
vyokyong
Seasoned Member
****




Posts: 169
Re: Ways to improve sound quality of The MYSTERY AMP !
Reply #42 - 09/17/14 at 03:31:51
 
Here is picture after installing of Obbligato Gold Premium film capacitor 10 uF 630 VDC.

Film capacitor does not have positive/negative pole, it can be used either poles to connect to positive wire, but I believe in different poles affected to different sound quality. I check wire lead out from both sides of caps and select the most center position wire lead out side of caps to be connected with positive wire. (The center wire lead out is the start roll and not in center wire lead out is end of roll).

The caps must be matched pair.

Damping Isolation is very important to caps's sound quality. The caps must be fixed well, no vibration. It is not good just hanging caps by its wire. I use Soundcoat damping (GP-3 Sheet, pressure sensitive adhesive backed) material to be placed between caps and steel chassis.

I select caps value by maximize value of caps which has dimension size that can be fixed in ZMA available space. Different value of caps has affects to different sound quality. You have to try to find best value for your taste.

Obbligato caps review:
http://www.enjoythemusic.com/diy/0411/capacitor1.htm
http://www.humblehomemadehifi.com/Cap.html
http://singaporehifi.blogspot.com/2010/09/capacitor-shoot-out.html
http://www.diyaudio.com/forums/solid-state/181001-mixed-results-using-obbligato-...
http://jimmyauw.com/2008/07/26/time-of-obbligatos/

If the caps value does not exceed 10% of factory spec, it will not harm circuit.  

I try to keep soldered points of wires of Obbligato caps closed to soldered points of wires of Electrolytic caps.

I will report sound improvement after installing Obbligato caps soon. The first listening is very very positive.




Back to top
 

photo_66.JPG

Audio Note DAC3.1 Custom modded to 4.1, DIY Duelund wire RCA IC, Offramp 5 USB SPDIF converter, Mac Mini, Amarra Symphony player,
Zen Mystery Amp. MIT Oracle speaker wire, Avalon Eidolon Diamond speakers. Coincident Statement preamp, Martin Logan Depth subwoofer
  IP Logged
vyokyong
Seasoned Member
****




Posts: 169
Re: Ways to improve sound quality of The MYSTERY AMP !
Reply #43 - 09/18/14 at 03:10:57
 
The sound improvement from Obbligato caps by passing electrolytic caps in PSU (power supply unit) of ZMA is ;

1) Upper Mid to high frequency is noticeably much better! It is not subtle. The surprise is note decay. The long note decay is something, every one looking for.  

Attack and decay

Attack is the extent to which the note is hit. Rhythm is communicated through attack. Once hit, how long is the note allowed to sound? Decay is the time within the full duration of the note that the sound is made.

ZMA is already excellent in note attack. But for note decay, I still want more, particularly high frequency notes of cymbals. I feel that the Obbligato caps by passing caps makes note decay double longer than before mode. It is very enjoy, my face has a big smile!

2) It is about control, control, control! in all full frequency spectrum, not just bass. It is very excellent control in timing and rhythm. You feel rhythm is perfect timing, not too early and not too delay. Previously, I feel original ZMA play music like little hurry! It makes you exciting but feel little exhaust. After bypassing caps mod, it is perfect timing. The rhythm is very beautiful of both slow and fast songs. quiet moment and loud moment.    

3) Much more full body and weight.  After I change factory IEC inlet to be Furutech IEC inlet Rhodium plated, the magic details of sound come back. But the sound is thinner (-30%). After adding by passing caps, the sound is full and weighty or rich. It is more full and rich than before IEC inlet changing. It transforms your Hi Fi system to be like singer and music band are playing in your room. It is very natural, liquid smooth and involving. I like to use word "Having music band playing in your room". You feel like you listen to live concert, not Hi Fi system. Because it makes totally different experience from listening to very excellent and expensive Hi Fi system, It is very enjoy but you still know that you listen to Hi Fi system.  

I must say that Bypassing Electrolytic caps with Film caps is a must to do, not just highly recommend. And it is not expensive or high investment.

Next, I will change factory Fuse to be Synergistic Research Quantum Fuse. (Blue).

Please be noted that any mod must be done with your own risk. Please study well before doing mod or hire professional electrician to do for you.
Back to top
 
 

Audio Note DAC3.1 Custom modded to 4.1, DIY Duelund wire RCA IC, Offramp 5 USB SPDIF converter, Mac Mini, Amarra Symphony player,
Zen Mystery Amp. MIT Oracle speaker wire, Avalon Eidolon Diamond speakers. Coincident Statement preamp, Martin Logan Depth subwoofer
  IP Logged
vyokyong
Seasoned Member
****




Posts: 169
Re: Ways to improve sound quality of The MYSTERY AMP !
Reply #44 - 09/18/14 at 10:44:12
 
I forgot to add;

4) Sound stage and Holographic Image is also improve. You feel more real and notes immerse from space in very dark background. I believe that if you want excellent 3D image, sound stage and dark backgound, you have to have the best PSU section of your Amp.
Back to top
 
 

Audio Note DAC3.1 Custom modded to 4.1, DIY Duelund wire RCA IC, Offramp 5 USB SPDIF converter, Mac Mini, Amarra Symphony player,
Zen Mystery Amp. MIT Oracle speaker wire, Avalon Eidolon Diamond speakers. Coincident Statement preamp, Martin Logan Depth subwoofer
  IP Logged
vyokyong
Seasoned Member
****




Posts: 169
Re: Ways to improve sound quality of The MYSTERY AMP !
Reply #45 - 09/18/14 at 14:13:27
 
One observation is that warm up time is longer. Before mod, warm up time is one hour. But after mod, warm up time is two hours. I think that new Obbligato caps may need more time for warm up. I hope that after more burn in, its warm up time will be shorter.
Back to top
 
 

Audio Note DAC3.1 Custom modded to 4.1, DIY Duelund wire RCA IC, Offramp 5 USB SPDIF converter, Mac Mini, Amarra Symphony player,
Zen Mystery Amp. MIT Oracle speaker wire, Avalon Eidolon Diamond speakers. Coincident Statement preamp, Martin Logan Depth subwoofer
  IP Logged
vyokyong
Seasoned Member
****




Posts: 169
Re: Ways to improve sound quality of The MYSTERY AMP !
Reply #46 - 09/19/14 at 03:00:40
 
Replace factory fuse with Synergistic Research Quantum Fuse 5A 250 V fast blow. (5x20mm size)  Price@USD 59.95  20% discount, net price USD 47.96

Result :

One direction of SR fuse : It makes sound extent both high and low, more lean, less warm. But I feel little congest and not liquid smooth. Burn-in may cure this negative sound.

If comparing it with new factory fuse, SR fuse is better, less lean, less congest sound.

However if compare to 6 month used factory fuse, I like 6 month used factory fuse. It provides more organic, full body and liquid smooth sound.

The other direction of SR fuse : It makes sound bloated warm body, dull sound. I don't like.

Conclude : I switch back to use 6 month used factory fuse. I think that audiophile fuse is not worth to spend. If factory fuse has long burn in enough, the sound is already okay.

Note : The Synergistic Research Fuse is not burn in yet and I don't want to waste time to do burn in of it. I am very happy with factory fuse (6 month burn in).
Back to top
 

photo_1_006.JPG

Audio Note DAC3.1 Custom modded to 4.1, DIY Duelund wire RCA IC, Offramp 5 USB SPDIF converter, Mac Mini, Amarra Symphony player,
Zen Mystery Amp. MIT Oracle speaker wire, Avalon Eidolon Diamond speakers. Coincident Statement preamp, Martin Logan Depth subwoofer
  IP Logged
vyokyong
Seasoned Member
****




Posts: 169
Re: Ways to improve sound quality of The MYSTERY AMP !
Reply #47 - 09/19/14 at 14:23:17
 
I have to say sorry to report that Synergistic Reseach Quantum fuse is not worth to spend. I make a wrong report.

The problem is that I test SR fuse when ZMA is not warmed well enough. As my observation is that mod ZMA has longer warm up time. But I use my usual warm up and test SR fuse. The sound congest comes from Amp did not warm up well.

This time, I warm up ZMA more than 2 hours to make sure that it warms up well. The SR fuse provides both extended sound in high and low frequency, particularly in high. It is very sparkling. Sound is more refined and more transparency that make more precise focus image. But it trades off of warm sound (little less warm, little more lean). However I love it.

Conclude : worth to buy SR fuse.
Back to top
 
 

Audio Note DAC3.1 Custom modded to 4.1, DIY Duelund wire RCA IC, Offramp 5 USB SPDIF converter, Mac Mini, Amarra Symphony player,
Zen Mystery Amp. MIT Oracle speaker wire, Avalon Eidolon Diamond speakers. Coincident Statement preamp, Martin Logan Depth subwoofer
  IP Logged
vyokyong
Seasoned Member
****




Posts: 169
Re: Ways to improve sound quality of The MYSTERY AMP !
Reply #48 - 09/20/14 at 06:06:39
 
One observation is that I set meter at 48 mA. But after SR fuse installed and play for 2 hours up. The meter is moved to 52 mA. I have to tune it back to 48 mA. Because I don't want amp running too hot. SR fuse may let current pass more than stock fuse.
Back to top
 
 

Audio Note DAC3.1 Custom modded to 4.1, DIY Duelund wire RCA IC, Offramp 5 USB SPDIF converter, Mac Mini, Amarra Symphony player,
Zen Mystery Amp. MIT Oracle speaker wire, Avalon Eidolon Diamond speakers. Coincident Statement preamp, Martin Logan Depth subwoofer
  IP Logged
vyokyong
Seasoned Member
****




Posts: 169
Re: Ways to improve sound quality of The MYSTERY AMP !
Reply #49 - 09/22/14 at 04:57:30
 
Hi,

My conclusion of modification of PSU section (changing IEC inlet, add film caps by passing electrolytic caps and Audiophile fuse, Synergistic Research Quantum fuse), the sound improvement is;

1) Improvement in 3D sound stage, better image depth, image focus, feel space surround music instruments.
2) Improvement in pace, speed and rhythm control. The timing is precise in all frequency. But the bass is more easy to be captured that bass is better controlled, no bloated boom bass.
3) Improvement in mid to high frequency. The high frequency is more sparkling. The notes decay is longer.
4) Improvement is scale. Sound is fuller, bigger and more dense.

The above improvement is compared to before mod as bench mark and after mod is better. Remark : My listening room does not have any room treatment.

I feel that it may be boring to always report again and again that "Oh, the sound is more transparency after changing this. And after changing those, the transparency is more again, etc" Is there any changing that it is disappointment. Until now I will say "No". I ask myself that what is the ceiling of transparency, 3D image, dynamic, etc. Because every time, new mod improves sound better. It should be at certain point that any mod cannot improve it further. But until now I don't reach its ceiling yet.

I did mod again by double Duelund hook up 2 wires (two wires in one signal path) in Zen switching box. Because I observe that all top signature IC cable of top line (Cost is no object) is just double the quantity of wires in second top line. Then I think that what happened to sound improvement, if the Duelund hook up 2 wire is used 2 cables instead of 1 cable per signal path.

EUREKA! EUREKA! EUREKA!

It is a huge step improvement. I would like to compare by using LCD TV definition as following.

Before mod, ZMA is very excellent Standard definition TV.
After mod of 1 cable Duelund hook up 2 wire, pure copper and pure gold signal path connectors, Fuurutech IEC inlet, Obbligato caps, SR fuse, mod ZMA transforms to High Definition TV. (HDTV).
But if you add more 1 cable Duelund hook up 2 wire (2 cables per signal path), the mod ZMA becomes 4K Ultra High Definition TV (4K UHDTV).

I think this is my best definition of what sound improvement you get when mod by double wires or cables in signal path. (4 cables are used per channel, 2 cables for positive signal per channel and 2 cables for negative signal per channel)

It is worth every penny to spend double cables of Duelung hook up 2 wire which is very expensive cable. But the result is huge improvement to next level of itself, not just better.

Remark : I just did double Duelund hook up 2 wires in Zen Switching Box, not inside ZMA yet because the wire length is not enough.

I already ordered more of 32 feet of Duelund hook up 2 wire .
Total cost is USD 803, The wire price is USD 50.20 per feet, 50%discount, net price after discount is USD 25.10 per feet.
I plan to connect Zen switching box with ZMA by hard wire, no connectors. (You can save USD 796 from USD 388 WBT Ag 0210 RCA female jack and USD USD 408 from WBT 0110 Ag RCA male plug, if there is no discount. But you trade off of convenient of IC cable changing and convenient transport of Amp and ZSB.) I need 8 cables of 4 feet Duelund hook up 2 wire. I am very curious to the result when ZMA's internal signal cables are changed to double cables of Duelund hook up 2 wires. I will report soon when I got the cables and do changing.
Back to top
 

photo_2_005.JPG

Audio Note DAC3.1 Custom modded to 4.1, DIY Duelund wire RCA IC, Offramp 5 USB SPDIF converter, Mac Mini, Amarra Symphony player,
Zen Mystery Amp. MIT Oracle speaker wire, Avalon Eidolon Diamond speakers. Coincident Statement preamp, Martin Logan Depth subwoofer
  IP Logged
Pages: 1 2 3 4
Send Topic Print