Welcome, Guest. Please Login or Register
Decware Audio Forums
12/13/24 at 21:47:36 




Most recent 50 posts

Pages: 1
Send Topic Print
Driver for Pro 12 (Read 8117 times)
asiquis
Senior Member
***




Posts: 61
Driver for Pro 12
07/17/09 at 14:48:00
 
http://www.usspeaker.com/homepage.htm

Looks like getting the woofer suggested by Steve up here to Canada is going to be very much cost prohibitive, I can however get teh above driver here for about $90.  

What kind of crossover might I need to use these with the Selenium 210ti compression driver.

What other bits might I need.... L Pad?

I really need this part spelled out.

thanks
Ray

Back to top
 
 
  IP Logged
Steve Deckert
Administrator
*****


If the 1st watt
sucks why continue?

Posts: 6344
Re: Driver for Pro 12
Reply #1 - 07/17/09 at 23:34:14
 
No problem with that.  Being a pro PA cabinet designed to go down to 60 Hz, virtually all of the Eminence drivers listed on that page will work.  Of course each will sound different.  As long as you use a 12 inch P.A. speaker or BASS guitar speaker you'll be fine.  Don't use guitar speakers unless you plan to use it with a guitar amp.

Steve
Back to top
 
 
WWW   IP Logged
mmclonis
Ex Member



Re: Driver for Pro 12
Reply #2 - 04/06/10 at 00:13:01
 
Question on this topic for you Steve, since you brought up the subject of the guitar speaker above.  If you are using a guitar speaker in the Pro12M design and using it for the purpose of playing guitar through it, would using the tuning board enhance or improve the sound of the lower frequencies?
Back to top
 
 
  IP Logged
Steve Deckert
Administrator
*****


If the 1st watt
sucks why continue?

Posts: 6344
Re: Driver for Pro 12
Reply #3 - 04/06/10 at 03:28:11
 
It would, yes.  Simply have someone slowly insert it as you're playing and see if you like it.  We have played guitar through this cabinet without the tuning board and are very impressed with it.
Back to top
 
 
WWW   IP Logged
Pages: 1
Send Topic Print