Welcome, Guest. Please Login or Register
Decware Audio Forums
04/29/24 at 15:58:26 




Pages: 1
Send Topic Print
Paging anyone that’s built HDT Mk 2 speakers (Read 441 times)
sgszen
Verified Member
**




Posts: 17
Paging anyone that’s built HDT Mk 2 speakers
10/19/23 at 18:29:37
 
I’ve purchased everything for this build except the internal wire. It’s not clear to me, looking at the plans, if the wire will go directly from the posts to the driver or if it takes a different path.

I’m looking at Black Dragon wire that is very expensive and prefer to purchase the optimum length rather than too much.

Thanks in advance
Back to top
 
 
  IP Logged
ZYGI
Seasoned Member
****


HR-ONE

Posts: 757
Re: Paging anyone that’s built HDT Mk 2 speakers
Reply #1 - 10/19/23 at 20:37:44
 
SGSZEN

The wire should g directly through the center of the "X" to the driver.

I use a 16" piece for each.

Zygi
Back to top
 
 

All Decware amps and sources, Turning Point Audio speakers
  IP Logged
sgszen
Verified Member
**




Posts: 17
Re: Paging anyone that’s built HDT Mk 2 speakers
Reply #2 - 10/19/23 at 20:49:05
 
Great - thanks for the info. I'll post again when completed.
Back to top
 
 
  IP Logged
Pages: 1
Send Topic Print