Forums - Print Page

Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl
AUDIO FORUMS >> General Discussion and Support >> Paging anyone that’s built HDT Mk 2 speakers
https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1697736578

Message started by sgszen on 10/19/23 at 18:29:37

Title: Paging anyone that’s built HDT Mk 2 speakers
Post by sgszen on 10/19/23 at 18:29:37

I’ve purchased everything for this build except the internal wire. It’s not clear to me, looking at the plans, if the wire will go directly from the posts to the driver or if it takes a different path.

I’m looking at Black Dragon wire that is very expensive and prefer to purchase the optimum length rather than too much.

Thanks in advance

Title: Re: Paging anyone that’s built HDT Mk 2 speakers
Post by ZYGI on 10/19/23 at 20:37:44

SGSZEN

The wire should g directly through the center of the "X" to the driver.

I use a 16" piece for each.

Zygi

Title: Re: Paging anyone that’s built HDT Mk 2 speakers
Post by sgszen on 10/19/23 at 20:49:05

Great - thanks for the info. I'll post again when completed.