Welcome, Guest. Please Login or Register
Decware Audio Forums
04/26/24 at 14:21:07 




Forums › EQUIPMENT FORUMS › ZROCK2 ‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
Zrock Question (Read 863 times)
E045717
Verified Member
**




Posts: 14
Zrock Question
04/29/23 at 02:41:29  
Trying to run my ZRock2 from my ZP3 to ZROCK2 to my2.1. Not really seeing any difference. When I switch the front toggle the sound stops. Obviously I’m doing something wrong. Any help is appreciated.
Back to top
 
 
  IP Logged
lobo
Verified Member
**




Posts: 45
Re: Zrock Question
Reply #1 - 04/29/23 at 06:06:51  
Have you tried switching your cables on the zrock.
Back to top
 
 
2xse84ufo 25th mods bridged-pontusII-SHD Studio-Liondias silver10 w15
  IP Logged
Tony
Seasoned Member
****


"Life without
..music is
inconceivable"
A.Einsteln

Posts: 627
Re: Zrock Question
Reply #2 - 04/29/23 at 06:38:31  

I had same problem the other day. I had cables mixed up on the back of ZROCK2. Once corrected, switch on front worked in both directions as expected.  ZROCK2 functioned when chosen by switch.  Hope this works for you.
Back to top
 
 
SE84UFO25 | Ic0n4 Passive Preamp | ZBIT | Cambr. CXNv2 | Denafrips Pontus II | Denafrips Gaia | Decware I/Cs | Decware Pwr Cbls | ZWIRE Speaker Cbls | Omega SAHOM & KEF KC62 | Furman Cond l GIK Room Trmt
  IP Logged
E045717
Verified Member
**




Posts: 14
Re: Zrock Question
Reply #3 - 04/29/23 at 12:21:54  
Sometimes you just gotta walk away. Rotated those cables. All is good. Thought I had done that but apparently not. Thanks for the help. This group always helps out.  :)
Back to top
 
 
  IP Logged
Pages: 1
Send Topic Print
Forums › EQUIPMENT FORUMS › ZROCK2 ‹ Previous topic | Next topic ›

UPLOAD IMAGES HERE





Forums » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.


Source Forge