Forums - Print Page

Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl
EQUIPMENT FORUMS >> ZROCK2 >> Zrock Question
https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1682732490

Message started by E045717 on 04/29/23 at 02:41:29

Title: Zrock Question
Post by E045717 on 04/29/23 at 02:41:29

Trying to run my ZRock2 from my ZP3 to ZROCK2 to my2.1. Not really seeing any difference. When I switch the front toggle the sound stops. Obviously I’m doing something wrong. Any help is appreciated.

Title: Re: Zrock Question
Post by lobo on 04/29/23 at 06:06:51

Have you tried switching your cables on the zrock.

Title: Re: Zrock Question
Post by Tony on 04/29/23 at 06:38:31

I had same problem the other day. I had cables mixed up on the back of ZROCK2. Once corrected, switch on front worked in both directions as expected. ZROCK2 functioned when chosen by switch. Hope this works for you.

Title: Re: Zrock Question
Post by E045717 on 04/29/23 at 12:21:54

Sometimes you just gotta walk away. Rotated those cables. All is good. Thought I had done that but apparently not. Thanks for the help. This group always helps out. :)