Forums - How to Replace a Fuse

Welcome, Guest. Please Login or Register

04/25/24 at 23:30:25

Forums › AUDIO FORUMS › D.I.Y.

‹ Previous topic | Next topic ›

Pages: 1

How to Replace a Fuse (Read 1199 times)

RoanWrangler Verified Member Posts: 6	How to Replace a Fuse 09/20/22 at 00:46:31 A fuse(s) in my new Tori Jr. needs to be replaced. I was told that the wood base must be removed to reveal the fuses. How is the base removed? With the screws on top of the unit? Thanks.
Back to top	Pro-ject - RPM 3 Carbon Sumiko - Blue Note 2 Schiit - Mani Marantz - ND8006 Border Patrol - DAC SE-i G.A.S. - Thalia G.A.S. - Son of Ampzilla Carver - C-2 Carver - M 1.5t Decware - TORII JRv2 (any month now) Decware - ZP3 (2025) Decware - MRC1 (2025) IP Logged

Lon

Seasoned Member

"Love without
guts is
worthless!"
Philip K. Dick

Posts: 23519

Re: How to Replace a Fuse
Reply #1 - 09/20/22 at 01:22:26

It may be the fuse that is in the IEC holder where the power cord fits in. You'll see a little compartment at the top that can be opened with a dime or flat screwdriver.

If it's not that main fuse then remove all the screws around the perimeter of the steel chassis base and lift it off the base, you'll see the little panel of fuses on the bottom of the chassis.

HR-1,ZBIT,ZROCK2,SEWE300B,CSP3-25mod; Rega RP3 all GrooveTracer mods;PSAudio:PST+DSD, DAC Mk II, P15,NPC,PowerBases,AC-12 pwr cbls, Reference spkrcbls; Mapleshade SamsonV3; VooDoo:Cremona+Amati interconnects, IsoPods; headphones: Sennheiser HD800S,ZMF Ori,Oppo PM1

IP Logged

RoanWrangler Verified Member Posts: 6	Re: How to Replace a Fuse Reply #2 - 09/20/22 at 15:39:35 Thank you!
Back to top	Pro-ject - RPM 3 Carbon Sumiko - Blue Note 2 Schiit - Mani Marantz - ND8006 Border Patrol - DAC SE-i G.A.S. - Thalia G.A.S. - Son of Ampzilla Carver - C-2 Carver - M 1.5t Decware - TORII JRv2 (any month now) Decware - ZP3 (2025) Decware - MRC1 (2025) IP Logged

Pages: 1

Forums › AUDIO FORUMS › D.I.Y.

‹ Previous topic | Next topic ›

UPLOAD IMAGES HERE