Forums - Print Page

Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl
AUDIO FORUMS >> D.I.Y. >> How to Replace a Fuse
https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1663631191

Message started by RoanWrangler on 09/20/22 at 00:46:31

Title: How to Replace a Fuse
Post by RoanWrangler on 09/20/22 at 00:46:31

A fuse(s) in my new Tori Jr. needs to be replaced. I was told that the wood base must be removed to reveal the fuses. How is the base removed? With the screws on top of the unit? Thanks.

Title: Re: How to Replace a Fuse
Post by Lon on 09/20/22 at 01:22:26

It may be the fuse that is in the IEC holder where the power cord fits in. You'll see a little compartment at the top that can be opened with a dime or flat screwdriver.

If it's not that main fuse then remove all the screws around the perimeter of the steel chassis base and lift it off the base, you'll see the little panel of fuses on the bottom of the chassis.

Title: Re: How to Replace a Fuse
Post by RoanWrangler on 09/20/22 at 15:39:35

Thank you!