Welcome, Guest. Please Login or Register
Decware Audio Forums
04/18/24 at 21:38:01 




Forums › AUDIO FORUMS › D.I.Y. ‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
ZKIT-1 Circuit Ground question (Read 1058 times)
goso64
Verified Member
**




Posts: 27
ZKIT-1 Circuit Ground question
04/20/22 at 14:38:48  
Hello,

I'm confused about these statements in the instructions for the ZKIT-1:

"Also don’t forget to install a jumper between the circuit ground and the board shield (ground plane). There is no specific location marked for this jumper."

Question: How do I identify where to install this jumper since there is no location marked for it.  


Thanks - this is my first kit so sorry for the newbie questions.

goso64
Back to top
 
 
  IP Logged
Mannytheseacow
Ex Member
Re: ZKIT-1 Circuit Ground question
Reply #1 - 04/21/22 at 23:28:09  
I think it just means make sure you ground your board.  Aka, don't forget to connect the board's ground to your common ground on the chassis.
I could easily be wrong, I'm no expert.  But this is all I did on my zkit and I have no issues or hum.
Back to top
 
 
  IP Logged
goso64
Verified Member
**




Posts: 27
Re: ZKIT-1 Circuit Ground question
Reply #2 - 04/22/22 at 17:18:12  
Thanks for confirming!
Back to top
 
 
  IP Logged
Pages: 1
Send Topic Print
Forums › AUDIO FORUMS › D.I.Y. ‹ Previous topic | Next topic ›

UPLOAD IMAGES HERE





Forums » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.


Source Forge