Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl AUDIO FORUMS >> D.I.Y. >> ZKIT-1 Circuit Ground question https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1650461928 Message started by goso64 on 04/20/22 at 14:38:48 |
Title: ZKIT-1 Circuit Ground question Post by goso64 on 04/20/22 at 14:38:48 Hello, I'm confused about these statements in the instructions for the ZKIT-1: "Also don’t forget to install a jumper between the circuit ground and the board shield (ground plane). There is no specific location marked for this jumper." Question: How do I identify where to install this jumper since there is no location marked for it. Thanks - this is my first kit so sorry for the newbie questions. goso64 |
Title: Re: ZKIT-1 Circuit Ground question Post by Mannytheseacow on 04/21/22 at 23:28:09 I think it just means make sure you ground your board. Aka, don't forget to connect the board's ground to your common ground on the chassis. I could easily be wrong, I'm no expert. But this is all I did on my zkit and I have no issues or hum. |
Title: Re: ZKIT-1 Circuit Ground question Post by goso64 on 04/22/22 at 17:18:12 Thanks for confirming! |
Forums » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |