I was helping a friend this weekend setup his system, he's on the East coast and I'm on the West, so we were doing this over video on our iphones.  
He was telling me that he wasn't getting any audio signal from his new system.  New TORII jr., DAC/CD streamer.

As I wasn't sure about his DAC/CD setup I concentrated on this device.  He's a complete neophyte, but I thought he had at least read his owner's manuals, not.

He then mentioned "should all the tubes be glowing?".  Well yes, I responded.  He then told me that two weren't.  I really couldn't see with the iphone how he had the tubes plugged in, but I then noticed that the brown based EL34s were lined up parallel to each other.  What he had done was plugged the OA3s directly into the EL34 slots and the EL34s into the OA3 slots.  Since I only have a Racheal (simple) I wasn't familiar with the layout of the TORII jr., nevertheless I was surprised that the pinouts would be the same, or at least the guide pins, etc.

After a quick look at the manual (thanks for those being online), I told him to move the rear EL34s to their correct locations, and he started the unit up.  The EL34s, the 6922s and Rectifier all glowed but no glow from the OA3s, so I figure those are blown.

My question is, should he also check the fuses, or just the fact that the other tubes are glowing suffice?  [smiley=dankk2.gif]

Thanks Archie!