Welcome, Guest. Please Login or Register
Decware Audio Forums
04/20/24 at 07:35:39 




Pages: 1
Send Topic Print
Turn around times . . . (Read 1864 times)
Billy Wonka
Verified Member
**




Posts: 3
Turn around times . . .
05/04/19 at 22:33:36
 
for an assembled version?  Does this amp have any top end roll off that a lot of solid state "tube sounding" gear seems to have?

Thanks
Back to top
 
 
  IP Logged
dank
Seasoned Member
****


pair of dual 18
Imperials

Posts: 420
Re: Turn around times . . .
Reply #1 - 05/07/19 at 00:22:19
 
We have assembled Zkit60's in stock, so turn around time should be minimal...whatever Sarah takes to process the order, pack the amp and ship it.  Probably also play it one last time just to be sure.

My immediate answer to your roll off question was "flat, 20-20khz" but then I remembered all the recent talk about super tweeters and it got me wondering, so I set it up and measured it.  From 20 - 20khz Vo/Vi is flat plus or minus 1/2 db.  At 50khz its down 2.2 db.  At 100k its down 6.3 db.  The low side is quite impressive also, down .5db at 20 hz, down .8 db at 10 hz, and down 1.1 db at 5 hz.  All tests were conducted with 8 ohm dummy loads, 2 channels driven, power out 6 watts rms per channel (1/10 the power rating).


Dan  
Back to top
 
 
  IP Logged
Pages: 1
Send Topic Print