Hello, I built a set of the small DNA's and am really enjoying them. They sound so good I want to come back for a larger pair.  I understand that The HDT Single Driver speaker plans are available - though I could not find the plans on the site. If anyone can direct me to the link to the plans I would appreciate it.

The DNA2's, I understand, can be built by applying a factor to the DNA plans that I purchased on the site to build the first set.  Does anyone have any experience with this? Are any other modifications needed?  Are the plans for the DNA2'S available?

Lastly, can anyone shed some light on which version would be the better build?  I am planning on using the 8" driver that Steve offers. Amp wise, I will probably be getting into one of the Decware SET amps.

Right now I am using a PASS Class A amp camp amp which is about 8 watts per side.  I am driving with my laptop and an Apogee Duet. Sounds lovely. Very detailed, The sound is all over the room, unbelievable, maybe a little light on bass, but not a big deal for this style of listening.  The musicality of the speakers is really exceptional.  Can listen for hours.

Any thoughts or suggestions on these items would be greatly appreciated.  thanks - Andy

Thank you, Steve, for your response. I imagine I would use the speakers you offer on your site as I don't have any experience with other drivers.

Are the plans for the HDT's still available? It appears that the DNA's may be a simpler build.  Any thoughts on building one vs. the other.

Thanks again. Andy

 Andy,

 i have built both the DNA and the HDT speakers. My experience actually finds the HDT speaker to be a bit simpler to build. One build advantage to the DNA speaker is that you can simply build the angles as you go by laying the speaker on it's side, and place the associated pieces like dominos, glueing and aligning them one at a time. Once that is done, spread the glue for the opposite side and clamp.... The HDT design really doesn't have any complexity to it from the table saw point of view, and building is pretty straightforward. Steve has designed a unique pressure chamber in the HDT design, and I appreciated that thought when building the cabinets. Sonically, I prefer the DNA, and really look forward to building the DNA2.

It would sure be interesting to hear a pair of FRX2’s in the DNA2.😳
Scott

Thanks for the comments on the different speaker cabinets.  Expect I'll do the DNA2's.  I did not quite understand Steve's comment "and the port will be lengthened by 2 inches so that it with the thickness of the panel totals 2.75 inches in length." Can anyone this?

I am working up ordering one of the amps.  

Thanks.