Welcome, Guest. Please Login or Register
Decware Audio Forums
05/01/25 at 08:49:01 



Most recent 50 posts

Forums › SUPPORT FORUMS FOR ZKITS › ZKIT 1 Support forum ‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
Left 651P tube gets extremely hot, voltage is off (Read 2854 times)
benlefebvre
Verified Member
**




Posts: 29
Left 651P tube gets extremely hot, voltage is off
10/21/18 at 23:10:16  
So close yet so far. I have the ZKIT loaded up and wired in. With speakers hooked up and volume down to zero, voltage at check point A is ~240V DC, about 100V below where it’s supposed to be. With no speakers hooked up, its more like 440V - way too high. Either way, the left side 651P tube heats up something fierce and if power is left on too long, the area around the tube starts to smoke. Any ideas?
Back to top
 
 
  IP Logged
benlefebvre
Verified Member
**




Posts: 29
Re: Left 651P tube gets extremely hot, voltage is off
Reply #1 - 11/15/18 at 23:46:44  
Aaaand after a lot of trouble shooting, it came down to the most fundamental part - a busted power transformer (or at least, a dead secondary tap). Yech.
Back to top
 
 
  IP Logged
Pages: 1
Send Topic Print
Forums › SUPPORT FORUMS FOR ZKITS › ZKIT 1 Support forum ‹ Previous topic | Next topic ›







Forums » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.


Source Forge