Forums - Speaker capacitor question

Welcome, Guest. Please Login or Register

12/03/23 at 00:37:42

Forums › AUDIO FORUMS › General Discussion and Support

‹ Previous topic | Next topic ›

Pages: 1

Speaker capacitor question (Read 3066 times)

SonicSeeker

Seasoned Member

Listening to the
music not the
equipment

Posts: 412

Speaker capacitor question
09/09/17 at 01:16:02

I am thinking of trying some Jupiter Copper foil paper in wax Capacitors in place of my Auricap XO's
The value of the XO's is 2.2uf 240VDC and the jupiters are 2.2uf 100VDC. Is there any reason to be concerned about the 240VDC volts versus 100VDC.
It is a first order with upper speaker binding post to capacitor to ribbon tweeter and lower speaker binding post through coil to lower drivers.

IP Logged

will

Seasoned Member

Posts: 2808

Re: Speaker capacitor question
Reply #1 - 09/09/17 at 02:16:30

I think Jupiter designs 100v Caps specifically for this use, 100v, less expensive than the 600v caps. I am pretty sure I remember Jupiter tests the 100v caps at 200v. I was using 100v Jupiter VTs in the same application, between speaker cable and tweeter for my HR-1s for a long time. Soniccraft is usually the best buy for Jupiter caps, and Jeff, the owner, knows his stuff if you want details.

All Modified: Balanced Trans>Uber>Brickwall/Shunyata Defender>RevolutionMacMini/Amarra>Kitsune Singxer/Gustardx20pro; DIY ZBIT, ZRock2, CSP3, Torii IV, Simple Wave 300B, HR1; Pi PCs and DIY PCs, ICs, USB, I2S, Speaker; SR and aluminum w ball bearing feet mainly

IP Logged

SonicSeeker Seasoned Member Listening to the music not the equipment Posts: 412	Re: Speaker capacitor question Reply #2 - 09/09/17 at 14:13:18 That's what I figured, thanks Will.
Back to top	IP Logged

will Seasoned Member Posts: 2808	Re: Speaker capacitor question Reply #3 - 09/09/17 at 19:28:01 Your are welcome! Let us know how you like the new caps if you will.
Back to top	All Modified: Balanced Trans>Uber>Brickwall/Shunyata Defender>RevolutionMacMini/Amarra>Kitsune Singxer/Gustardx20pro; DIY ZBIT, ZRock2, CSP3, Torii IV, Simple Wave 300B, HR1; Pi PCs and DIY PCs, ICs, USB, I2S, Speaker; SR and aluminum w ball bearing feet mainly IP Logged

SonicSeeker Seasoned Member Listening to the music not the equipment Posts: 412	Re: Speaker capacitor question Reply #4 - 09/09/17 at 19:40:15 I will do that. I also just sent you an e-mail Will.
Back to top	IP Logged

Pages: 1

Forums › AUDIO FORUMS › General Discussion and Support

‹ Previous topic | Next topic ›

UPLOAD IMAGES HERE