Forums - Speaker capacitor question

Welcome, Guest. Please Login or Register

05/01/25 at 13:05:02

Most recent 50 posts

Forums › AUDIO FORUMS › General Discussion and Support

‹ Previous topic | Next topic ›

Pages: 1

Speaker capacitor question (Read 4154 times)

SonicSeeker

Seasoned Member

Listening to the
music not the
equipment

Posts: 433

Speaker capacitor question
09/09/17 at 01:16:02

I am thinking of trying some Jupiter Copper foil paper in wax Capacitors in place of my Auricap XO's
The value of the XO's is 2.2uf 240VDC and the jupiters are 2.2uf 100VDC. Is there any reason to be concerned about the 240VDC volts versus 100VDC.
It is a first order with upper speaker binding post to capacitor to ribbon tweeter and lower speaker binding post through coil to lower drivers.

IP Logged

will

Seasoned Member

Posts: 3087

Re: Speaker capacitor question
Reply #1 - 09/09/17 at 02:16:30

I think Jupiter designs 100v Caps specifically for this use, 100v, less expensive than the 600v caps. I am pretty sure I remember Jupiter tests the 100v caps at 200v. I was using 100v Jupiter VTs in the same application, between speaker cable and tweeter for my HR-1s for a long time. Soniccraft is usually the best buy for Jupiter caps, and Jeff, the owner, knows his stuff if you want details.

All Modified: PSA-P5>DIY Strip/Shunyata Defender>RevolutionMacMini/Amarra-KTE Singxer/Gustardx20pro/ZBIT/ZR2/CSP3>LaoChen 300B/845>Omega SAHOMs/AudioSmile Tweeters,SVS Micro3000>Pi PCs and DIY PCs, ICs, USB, I2S, Speaker>SR and aluminum w ball bearing feet +

IP Logged

SonicSeeker Seasoned Member Listening to the music not the equipment Posts: 433	Re: Speaker capacitor question Reply #2 - 09/09/17 at 14:13:18 That's what I figured, thanks Will.
Back to top	IP Logged

will Seasoned Member Posts: 3087	Re: Speaker capacitor question Reply #3 - 09/09/17 at 19:28:01 Your are welcome! Let us know how you like the new caps if you will.
Back to top	All Modified: PSA-P5>DIY Strip/Shunyata Defender>RevolutionMacMini/Amarra-KTE Singxer/Gustardx20pro/ZBIT/ZR2/CSP3>LaoChen 300B/845>Omega SAHOMs/AudioSmile Tweeters,SVS Micro3000>Pi PCs and DIY PCs, ICs, USB, I2S, Speaker>SR and aluminum w ball bearing feet + IP Logged

SonicSeeker Seasoned Member Listening to the music not the equipment Posts: 433	Re: Speaker capacitor question Reply #4 - 09/09/17 at 19:40:15 I will do that. I also just sent you an e-mail Will.
Back to top	IP Logged

Pages: 1

Forums › AUDIO FORUMS › General Discussion and Support

‹ Previous topic | Next topic ›