Welcome, Guest. Please Login or Register
Decware Audio Forums
12/12/24 at 07:39:09 




Most recent 50 posts

Pages: 1
Send Topic Print
Rev 9 board with extra 1k resistor (Read 4977 times)
Jinks
Verified Member
**




Posts: 14
Rev 9 board with extra 1k resistor
10/31/16 at 16:19:44
 
Hi, I just built the rev 9 board version and noticed there is an extra 1k resistor in place of the previous 10k on the older rev board. As this wasn't listed in the parts I did not have the extra resistor so used a 10k in its place. I notice the Crossfeed will work only in the on position and it seems a little left side biased and in the off position there is no right channel feed at all, maybe that 1k is important after all? I have ordered some extra 1k's and we will see, but it sounds clean and refreshing so far Smiley

Thanks,

Mathew.
Back to top
 
 
  IP Logged
Pages: 1
Send Topic Print