Well it is time to put this latest project to bed.

My initial impressions of this project is that it isn't the best thing I've ever built. But I will give the drivers time to break in. I might also play around with differing amounts of damping material in the full range drivers' enclosure.

The sound is a little hollow sounding in the midrange, possibly a little adjustment to the crossovers are needed.

Here are some photos of said speakers.






I'm not disappointed but not raving about these yet.

Time will tell.

Have a great day you all!

Have you tried the speakers with the tweeters on the inside? Other than that I think they look great.

So when you build new speakers you need to build new speaker stands to go along with them.

I started cutting stuff out today trying to come up with a idea.
Slowly something is coming together. Shown is my rough idea, nothing glued together yet.
I will probably put the same cross pieces on the top sides also.
I'm trying to decide if I round edges, how to paint it, stuff like that.




There  sure is a lot of clutter in the background, mostly stuff to damp the insides of speakers.

There I was, just minding my own business when my neighbor, my retirement investment guy, came poking around my garage to see what I was doing. He knew that I built speakers, so he asked about if I could look at his old college speakers.
He said that he had some old Advent speakers that the foam surrounds had rotted off of them. So I quickly looked online and saw that there were cheap  surround kits available and somewhat reluctantly said that I would look at them.

Well a couple days later he dropped them off. The Advent's turned out to actually be Infinity RS 4000's with both the bass and midrange drivers roached.

Another quick search turned up a surround kit for both drivers and they were summarily ordered.

I then took everything apart, pulled drivers and possibly the most chintzy crossover ever out of the most surprisingly stunning conditioned 40 year old speaker boxes in captivity.

I thought about replacing the crossover components with new stuff but decided that the speakers probably weren't worth the time and money to do that. It didn't look bad and I had put power to it before taking it apart to check if the drivers would move and everything seemed ok.

I did start modifying the boxes though, they were as stiff as Kleenex held together with toothpicks. A bit of MDF has been cut up, lots of 45 degree cuts made and glued inside of the boxes to make them as stiff as a honeymoon pecker!

I'm now in Purgatory waiting for UPS to deliver the surround repair kit.
The boxes will probably get about eleventy seven coats of wax or perhaps a ceramic coating over the next few days whilst waiting then we will see if my skill set includes installing new foam surrounds and center caps that don't have dents in them. Wish me luck!

So I just ordered 2 Amp Camp Amps.
Like I need 2 more amplifiers.
Like I have the skills to build said 2 amplifiers.
Giving me access to credit cards isn't the smartest thing that my wife has ever done.
Probably money down the drain.
I will now need a preamplifier with XLR outputs and XLR cables.
Might as well build some speakers for them.
Bad decisions were made!