Welcome, Guest. Please Login or Register
Decware Audio Forums
04/16/24 at 23:16:42 




Forums › AUDIO FORUMS › General Discussion and Support ‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
Endeavor Speakers (Read 3861 times)
Dave1210
Seasoned Member
****




Posts: 959
Endeavor Speakers
05/14/15 at 15:31:04  
Anyone know much about this company or the below speakers.  We heard the E5 at Axpona.  They were in way too small of a room but I think had a lot of potential.  Their smaller speaker, the E3, is relatively efficient and supposed to have flat 4 ohm impedance, which should be a good match for tubes.  

http://www.endeavoraudio.com/products/e-3
Back to top
 
 
  IP Logged
Lin
Ex Member
Re: Endeavor Speakers
Reply #1 - 05/14/15 at 23:37:22  
While I haven't heard them or even heard of them until now, 87dB 1w/1m (probably inflated a dB or two) wouldn't qualify as "relatively efficient" to me.
YMMV
Back to top
 
 
  IP Logged
Dave1210
Seasoned Member
****




Posts: 959
Re: Endeavor Speakers
Reply #2 - 05/14/15 at 23:44:16  
Lin...is 90dB@2.83V/meter, really 87 dB 1w/1m for a 4 ohm speaker?  I guess I didn't look that closely and saw 90dB, and looked right past the 2.83V...

2.83V = 1 watt @ 8 ohm?
2.83V = 2 watts @ 4 ohm?

so they are really stating, 90 dB @ 2 watts vs. 1 watt?
Back to top
 
 
  IP Logged
Lin
Ex Member
Re: Endeavor Speakers
Reply #3 - 05/14/15 at 23:49:03  
With 4 ohm speakers yes, it would be 2 watts at 2.83v.
Back to top
 
 
  IP Logged
Dave1210
Seasoned Member
****




Posts: 959
Re: Endeavor Speakers
Reply #4 - 05/14/15 at 23:58:20  
Just saw your post as I was revising mine...makes sense now.  I should have paid closer attention...I think the ZMA could drive these speakers, but they are less interesting to me now.
Back to top
 
 
  IP Logged
Pages: 1
Send Topic Print
Forums › AUDIO FORUMS › General Discussion and Support ‹ Previous topic | Next topic ›

UPLOAD IMAGES HERE





Forums » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.


Source Forge