Welcome, Guest. Please Login or Register
Decware Audio Forums
05/01/25 at 12:13:48 



Most recent 50 posts

Forums › OLDER DECWARE GEAR SUPPORT › SE34I ‹ Previous topic | No topic ›
Pages: 1
Send Topic Print
SE34.I jumpers (Read 10231 times)
cbutterf
Ex Member
SE34.I jumpers
01/04/10 at 06:48:19  
CAn someone please tell me how to correctly hook up the jumpers on an SE34.I for a paralleled output? Thanks!

Chris
Back to top
 
 
  IP Logged
Steve Deckert
Administrator
*****


If the 1st watt
sucks why continue?

Posts: 6397
Re: SE34.I jumpers
Reply #1 - 01/04/10 at 17:38:22  
Just connect red to red and black to black for parallel operation.

Steve
Back to top
 
 
WWW   IP Logged
cbutterf
Ex Member
Re: SE34.I jumpers
Reply #2 - 01/04/10 at 17:46:06  
Forgive me for being dense - does this mean red to red on one side (L) and balck to black on the other (R)?

Thanks!!
Back to top
 
 
  IP Logged
ZYGI
Seasoned Member
****


HR-ONE

Posts: 757
Re: SE34.I jumpers
Reply #3 - 01/05/10 at 01:24:14  
Chris,

Welcome to the forum.....

This means red to red/black to black left channel  red to red/black to black right side.

Then hook your speakers up as usual  using one of the reds and one of the black on each of the two channels.

ZYGI
Back to top
 
 
All Decware amps and sources, Turning Point Audio speakers
  IP Logged
cbutterf
Ex Member
Re: SE34.I jumpers
Reply #4 - 01/05/10 at 01:40:19  
Thank you very much for this! Will now try and find 2nd pair of jumpers...

Chris
Back to top
 
 
  IP Logged
rmt
Seasoned Member
****




Posts: 238
Re: SE34.I jumpers
Reply #5 - 01/05/10 at 21:44:27  
Any short length of wire will do for jumpers. Nothing special, audio jewelry need not apply.
Back to top
 
 
Select, CSP2 upgrade, Dec 685, DSRii, Nibbelin NFX w/DFR-8s, SE34.I, Zbox
  IP Logged
Pages: 1
Send Topic Print
Forums › OLDER DECWARE GEAR SUPPORT › SE34I ‹ Previous topic | No topic ›







Forums » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.


Source Forge