Forums - Print Page

Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl
OLDER DECWARE GEAR SUPPORT >> SE34I >> SE34.I jumpers
https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1262587699

Message started by cbutterf on 01/04/10 at 06:48:19

Title: SE34.I jumpers
Post by cbutterf on 01/04/10 at 06:48:19

CAn someone please tell me how to correctly hook up the jumpers on an SE34.I for a paralleled output? Thanks!

Chris

Title: Re: SE34.I jumpers
Post by Steve Deckert on 01/04/10 at 17:38:22

Just connect red to red and black to black for parallel operation.

Steve

Title: Re: SE34.I jumpers
Post by cbutterf on 01/04/10 at 17:46:06

Forgive me for being dense - does this mean red to red on one side (L) and balck to black on the other (R)?

Thanks!!

Title: Re: SE34.I jumpers
Post by ZYGI on 01/05/10 at 01:24:14

Chris,

Welcome to the forum.....

This means red to red/black to black left channel red to red/black to black right side.

Then hook your speakers up as usual using one of the reds and one of the black on each of the two channels.

ZYGI

Title: Re: SE34.I jumpers
Post by cbutterf on 01/05/10 at 01:40:19

Thank you very much for this! Will now try and find 2nd pair of jumpers...

Chris

Title: Re: SE34.I jumpers
Post by rmt on 01/05/10 at 21:44:27

Any short length of wire will do for jumpers. Nothing special, audio jewelry need not apply.