Welcome, Guest. Please Login or Register
Decware Audio Forums
04/25/24 at 21:21:18 




Forums › SUPPORT FORUMS FOR DECWARE SPEAKER PLANS › Wicked One Support Forum ‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
help!!!!!!!!!!!!! (Read 6134 times)
chgreenfrog
Ex Member
help!!!!!!!!!!!!!
09/05/07 at 03:32:46  
i was introduced to this sub box by a family member.  I am going to try and build one for 10s ass a class project.  is there anything tricky to this box.  just a bunch of cutting and precise mesauring.
Back to top
 
 
  IP Logged
Deform
Ex Member
Re: help!!!!!!!!!!!!!
Reply #1 - 09/05/07 at 05:13:29  
Be carefull to make sure that you glue/screw it in carefully too... and the center V part i found that i couldnt cut the right angle on my bench saw as it wouldn't go that far.
And good luck.
Back to top
 
 
  IP Logged
chgreenfrog
Ex Member
Re: help!!!!!!!!!!!!!
Reply #2 - 09/05/07 at 15:59:08  
thanks i will try if i have any more questions i will ask.
Back to top
 
 
  IP Logged
Jet-Lee
Seasoned Member
****




Posts: 155
Re: help!!!!!!!!!!!!!
Reply #3 - 09/05/07 at 17:20:59  
beware when screwing together the angles, the pieces tend to slide. Practice on some scrap first, and you'll understand what I'm talking about.
Back to top
 
 
WWW e3_wizard jetleeamc   IP Logged
PC
Ex Member
Re: help!!!!!!!!!!!!!
Reply #4 - 10/19/07 at 15:35:39  
Drilling pilot holes for screws make things easier
Back to top
 
 
  IP Logged
Pages: 1
Send Topic Print
Forums › SUPPORT FORUMS FOR DECWARE SPEAKER PLANS › Wicked One Support Forum ‹ Previous topic | Next topic ›

UPLOAD IMAGES HERE





Forums » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.


Source Forge