Forums - Print Page

Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl
SUPPORT FORUMS FOR DECWARE SPEAKER PLANS >> Wicked One Support Forum >> help!!!!!!!!!!!!!
https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1188959566

Message started by chgreenfrog on 09/05/07 at 03:32:46

Title: help!!!!!!!!!!!!!
Post by chgreenfrog on 09/05/07 at 03:32:46

i was introduced to this sub box by a family member. I am going to try and build one for 10s ass a class project. is there anything tricky to this box. just a bunch of cutting and precise mesauring.

Title: Re: help!!!!!!!!!!!!!
Post by Deform on 09/05/07 at 05:13:29

Be carefull to make sure that you glue/screw it in carefully too... and the center V part i found that i couldnt cut the right angle on my bench saw as it wouldn't go that far.
And good luck.

Title: Re: help!!!!!!!!!!!!!
Post by chgreenfrog on 09/05/07 at 15:59:08

thanks i will try if i have any more questions i will ask.

Title: Re: help!!!!!!!!!!!!!
Post by Jet-Lee on 09/05/07 at 17:20:59

beware when screwing together the angles, the pieces tend to slide. Practice on some scrap first, and you'll understand what I'm talking about.

Title: Re: help!!!!!!!!!!!!!
Post by PC on 10/19/07 at 15:35:39

Drilling pilot holes for screws make things easier