Welcome, Guest. Please Login or Register
Decware Audio Forums
05/01/25 at 04:18:47 



Most recent 50 posts

Forums › SUPPORT FORUMS FOR DECWARE SPEAKER PLANS › Deathbox Support Forum ‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
Infinity Reference 1040w Subs (Read 852 times)
REDTHUNDER
Ex Member
Infinity Reference 1040w Subs
03/31/06 at 16:45:09  
For those that are/have run these subs, I was wondering if anyone is running more than the recommeded 250w rms each.  I have a couple and want to make use of the amp that I have.  Do you think I would have any trouble running 800w rms to the two?

Thanks
Back to top
 
 
  IP Logged
Adrian D.
Ex Member
Re: Infinity Reference 1040w Subs
Reply #1 - 03/31/06 at 16:50:22  
i haven't run the ref with more than 250w. but i have run 160w through a cheap 10, rated 80wrms. it's still alive.
my guess is that, with 400w/sub, they'll live, but not for several hours.
Back to top
 
 
  IP Logged
J_Rock
Ex Member
Re: Infinity Reference 1040w Subs
Reply #2 - 03/31/06 at 17:44:58  
the main thing to watch out for is the peak rating for long periods.  RMS gives you an idea of what the amp can actually put out for long times, and what a sub can play for long times.  If you decide to run 400wrms to each, just watch the volume knob.
Back to top
 
 
  IP Logged
slappomatt
Ex Member
Re: Infinity Reference 1040w Subs
Reply #3 - 04/01/06 at 17:38:33  
i have a single infinity 1030 4 ohm 10" in a sealed box in my single cab ranger. its the only smaller speaker ive found so far that would hold up to the 400 watts my 800a4 fosgae amp puts out in 3 channel mode. the older mtx and fosgate subs just died.
Back to top
 
 
  IP Logged
Pages: 1
Send Topic Print
Forums › SUPPORT FORUMS FOR DECWARE SPEAKER PLANS › Deathbox Support Forum ‹ Previous topic | Next topic ›







Forums » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.


Source Forge