Decware Audio Forums
06/09/26 at 18:26:41



Most recent 50 posts
Welcome, Guest. Please Login or Register

Pages: 1
Send Topic Print
Best way to fix scratchy volume pot (Read 3834 times)
AlexR
Verified Member
**
Offline



Posts: 49

Best way to fix scratchy volume pot
04/24/24 at 19:56:40
 
The left volume pot on my Torii Jr has gone scratchy. Is Deoxit the best way to fix this, or is a different method reccomended? I tried turning the knob back and forth several times, but this only fixes the problem temporarily.

Thanks in advance for any advice.
Back to top
 
 
AlexR   IP Logged
Share: X Facebook LinkedIn Email WhatsApp Instagram Likes:
CAJames
Seasoned Member
****
Offline

"I've run every
red light on memory
lane."

Posts: 3251

Re: Best way to fix scratchy volume pot
Reply #1 - 04/24/24 at 20:15:23
 
IMO yes, DeoxIT is the way to go. Although I would be tempted to send it to Decware and have them deal with it if it is under warranty.

Back to top
 
 

[Volumio | Jay's CDT2 MRK3] -> Denafrips Terminator 2 + Gaia
Sumiko Pearwood -> Mapleknoll Athena -> Luxman SUT -> Mapletree Phono 3E
STR-1002 -> Woo WA22 -> 2x UFO25s, balanced monos
Omega SAM , Hifiman Arya, Audeze LCD-XC
  IP Logged
Share: X Facebook LinkedIn Email WhatsApp Instagram Likes:
will
Seasoned Member
****
Offline



Posts: 3159

Re: Best way to fix scratchy volume pot
Reply #2 - 04/25/24 at 00:18:27
 
Sometimes turning it back and forth a lot of times will fix it for a while. I can't say I am an expert, but I have lightly sprayed Deoxit cleaner in the internal side spaces of the potentiometer that let you into the two channels of the resistors/wipers. Not much, and then I think turned it a bunch, and it worked. The next time I needed to clean one, I think I had found some Deoxit made specifically for this. Don't know the difference, maybe not mineral oil based??? but it worked too. I have mostly replaced the potentiometers with really nice potentiometers or attenuators so it has been a while.
Back to top
 
 

All Modified: PSA-P5>DIY Strip/Shunyata Defender, Verifi...>RevolutionMacMini/Amarra-KTE Singxer/MP-DX DAC/ZR2/Zstage/CSP3>Torii IV>Omega SAHOM/AudioSmile Tweeters, SVS Micro3000>mostly DIY PCs, ICs, USB, I2S, Speaker>Stack and aluminum w ball bearing feet...
  IP Logged
Share: X Facebook LinkedIn Email WhatsApp Instagram Likes:
AlexR
Verified Member
**
Offline



Posts: 49

Re: Best way to fix scratchy volume pot
Reply #3 - 04/26/24 at 21:48:58
 
Thanks for the replies. I turned the knob back and forth again and it seemed to do the trick. I have some Deoxit D5 I can try if it doesn't hold. Hoping not to have to do that if I can help it.
Back to top
 
 
AlexR   IP Logged
Share: X Facebook LinkedIn Email WhatsApp Instagram Likes:
dank
Seasoned Member
****
Offline

pair of dual 18
Imperials

Posts: 425
x1|Ramsey|USA|USA|308|86|MN,Minnesota
Re: Best way to fix scratchy volume pot
Reply #4 - 04/29/24 at 11:22:33
 
I've had better luck with WD-40 than with Deoxit.  Its fixed pots that Deoxit couldn't.  Someone else mentioned that the lubrication properties of WD-40 also help the mechanical properties of a pot.


Dan
Back to top
 
 
  IP Logged
Share: X Facebook LinkedIn Email WhatsApp Instagram Likes:
Pages: 1
Send Topic Print