Forums - CNC Tiny Radials

06/21/26 at 14:06:03

Most recent 50 posts
Welcome, Guest. Please Login or Register

Forums » D.I.Y.

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

CNC Tiny Radials (Read 3683 times)

deucekazoo Seasoned Member Offline Posts: 461 x0\|East Peoria\|USA\|\|0\|0\|IL,Illinois	CNC Tiny Radials 11/03/22 at 01:59:11 Needed some speakers for all the travel I am doing lately. They needed to be small enough to fit inside the suitcase. I bought the Tiny Radial plans a while back so finally got around to making them with stuff, I had laying around the shop.
Back to top	IMG_7716.jpg IP Logged Share: Likes:

deucekazoo Seasoned Member Offline Posts: 461 x0\|East Peoria\|USA\|\|0\|0\|IL,Illinois	Re: CNC Tiny Radials Reply #1 - 11/03/22 at 02:01:12 The holes are there to align all the sections and also solid wood for the driver mounting screws to screw into.
Back to top	IMG_7717.jpg IP Logged Share: Likes:

deucekazoo Seasoned Member Offline Posts: 461 x0\|East Peoria\|USA\|\|0\|0\|IL,Illinois	Re: CNC Tiny Radials Reply #2 - 11/03/22 at 02:02:32 The tops had to be Padauk!
Back to top	IMG_7725.jpg IP Logged Share: Likes:

deucekazoo Seasoned Member Offline Posts: 461 x0\|East Peoria\|USA\|\|0\|0\|IL,Illinois	Re: CNC Tiny Radials Reply #3 - 11/03/22 at 02:04:45 They sound great and fit perfectly in my work boots to protect them inside the suitcase.
Back to top	IMG_7729.jpg IP Logged Share: Likes:

Sean Seasoned Member Offline Posts: 399	Re: CNC Tiny Radials Reply #4 - 11/03/22 at 02:53:06 That’s awesome! As an amateur wood worker, or better yet hacker, I’d love to get a CNC. I think this is the best example of what can accomplish with one that I’ve seen.
Back to top	Technics 1210G, Phasemation PP-500, ZMC2, ZP3, CSP2+, UFO25, Tekton Pendragon Mac Mini, Denafrips Iris 12th, Denafrips Ares 15, Mapletree 4A SE, UFO, Tekton Lore, EcoFlow River 2 Pro IP Logged Share: Likes:

EdwardT Seasoned Member Offline Posts: 366	Re: CNC Tiny Radials Reply #5 - 11/03/22 at 18:53:42 So very cool! I've been studying some cabs using translamination for my next speaker project and this just makes me want to do it even more.
Back to top	IP Logged Share: Likes:

deucekazoo Seasoned Member Offline Posts: 461 x0\|East Peoria\|USA\|\|0\|0\|IL,Illinois	Re: CNC Tiny Radials Reply #6 - 11/11/22 at 21:48:53 Thanks guys, this was fun to do. They actually survived the trip. They do sound good, but I need to try them on some Decware amps to see how they will sound on tubes. If they sound good and the amp has enough power for them, I will try to make a tube amp that will fit into the suitcase. I have some ideas to get the amp portable.
Back to top	IP Logged Share: Likes:

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

Forums » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Heavily modified by Steve Deckert for DECWARE LLC

Source Forge