Forums - Rachel has No power

DVDMike Verified Member Posts: 31	Rachel has No power 01/27/22 at 21:02:16 When I tried to power up my Rachel today, made about a year ago, nothing lights up. I’ve tried switching outlets and switching power cables. Turned off the switch. Turned it back on. Is there any other troubleshooting I can do?
Back to top	IP Logged

HockessinKid Seasoned Member Posts: 1247	Re: Rachel has No power Reply #1 - 01/27/22 at 21:22:08 Check the fuses. HK
Back to top	Nottingham Interspace TT > Modwright PH 9.0XT phono preamp OR MWI modded Cambridge CNX V2 > CSP3-25th Ann. preamp > STL STR-1002 Super > ZMA-25th Ann. amp > PI Audio UberBUSS > Caintuck Audio Lii15 Magnum speakers > VeraFi SDFB's > SA AUVA's > SRA & ZenWave cables IP Logged

Lon Seasoned Member "Love without guts is worthless!" Philip K. Dick Posts: 25756	Re: Rachel has No power Reply #2 - 01/27/22 at 21:22:36 Sounds like a fuse blown. Check out the fuse in the fuse holder on the top of the IEC inlet. There should be a spare there too.
Back to top	HR-1,ZBIT,ZROCK3,SEWE300B,CSP3-25mod; Rega RP3 all GrooveTracer mods;PSAudio:PST+DSD, DAC Mk II, P15,NPC,PowerBases,AC-12 pwr cbls, Reference spkrcbls; Mapleshade SamsonV3; VooDoo:Cremona+Amati interconnects;Stack EQ; headphones: Sennheiser HD800S,ZMF Ori,Oppo PM1 IP Logged

DVDMike Verified Member Posts: 31	Re: Rachel has No power Reply #3 - 01/27/22 at 21:55:43 Thanks guys. I had to look up in the manual where the fuse was but I haven’t checked it yet. I’ll post back tomorrow!
Back to top	IP Logged

DVDMike Verified Member Posts: 31	Re: Rachel has No power Reply #4 - 01/28/22 at 22:22:11 The fuse was blown. I put in the clean spare fuse and it started to come on and blew again. The big tube in the center lit up and flickered. It has 274b written on it. So something is is messed up here. Both fuses are smoked, literally.
Back to top	IP Logged

HockessinKid Seasoned Member Posts: 1247	Re: Rachel has No power Reply #5 - 01/28/22 at 23:00:43 Call Decware, talk with Steve. May have to ship it back for a repair. HK
Back to top	Nottingham Interspace TT > Modwright PH 9.0XT phono preamp OR MWI modded Cambridge CNX V2 > CSP3-25th Ann. preamp > STL STR-1002 Super > ZMA-25th Ann. amp > PI Audio UberBUSS > Caintuck Audio Lii15 Magnum speakers > VeraFi SDFB's > SA AUVA's > SRA & ZenWave cables IP Logged

Geno Seasoned Member Without music, life would be a mistake. Posts: 2219	Re: Rachel has No power Reply #6 - 01/29/22 at 03:47:49 Mike, Do you have another rectifier tube to try? If the one you have in now is about to fail, it could be causing the fuses to blow. Best, Geno
Back to top	(2)SE84UFO(Balanced Monoblocs) OR Sansui AU222 Cambrge Audio CXN(ModWright) Crown XLS-1002 SL1210MK5(KAB Mods) Soundsm Aida MKll cart • Darlingt.Labs MP8b Otari MX5050-Bii2 R2R ZLC Power Cond Lii Audio PT-10 OR F-12 OR Betsy Alnico 8"/ W-15 in Open Baffle IP Logged

DVDMike Verified Member Posts: 31	Re: Rachel has No power Reply #7 - 01/29/22 at 12:56:18 I don’t have a spare tube. I guess I should try and find one?
Back to top	IP Logged

DVDMike Verified Member Posts: 31	Re: Rachel has No power Reply #8 - 01/29/22 at 13:02:21 Wow, these tube can be expensive! https://sophiaelectric.com/products/pages-se-274b Anyone have a better source for these tubes?
Back to top	IP Logged

Lon Seasoned Member "Love without guts is worthless!" Philip K. Dick Posts: 25756	Re: Rachel has No power Reply #9 - 01/29/22 at 13:36:18 Sometimes they sell "B" stock versions a bit cheaper, and sometimes you can find them on eBay a bit cheaper, but they're expensive tubes. I really like them though. NOTE: I have never used the "Princess" models but have been told they won't have longevity in these amps--the one to use in the Decware amps is the "Aqua" model.
Back to top	HR-1,ZBIT,ZROCK3,SEWE300B,CSP3-25mod; Rega RP3 all GrooveTracer mods;PSAudio:PST+DSD, DAC Mk II, P15,NPC,PowerBases,AC-12 pwr cbls, Reference spkrcbls; Mapleshade SamsonV3; VooDoo:Cremona+Amati interconnects;Stack EQ; headphones: Sennheiser HD800S,ZMF Ori,Oppo PM1 IP Logged

Lon Seasoned Member "Love without guts is worthless!" Philip K. Dick Posts: 25756	Re: Rachel has No power Reply #10 - 01/29/22 at 13:38:08 I'd recommend buying a NOS RCA 5U4G or 5V4G tube, they are less expensive and really work well in these amps. When I had a "Rachel" (well, it was before they were calling the amp that) I used these very happily.
Back to top	HR-1,ZBIT,ZROCK3,SEWE300B,CSP3-25mod; Rega RP3 all GrooveTracer mods;PSAudio:PST+DSD, DAC Mk II, P15,NPC,PowerBases,AC-12 pwr cbls, Reference spkrcbls; Mapleshade SamsonV3; VooDoo:Cremona+Amati interconnects;Stack EQ; headphones: Sennheiser HD800S,ZMF Ori,Oppo PM1 IP Logged

Cuff

Verified Member

Posts: 16

Re: Rachel has No power
Reply #11 - 01/30/22 at 16:59:07

I'll second Lon's recommendation. The ValveArt 274B that shipped with my Rachael failed around 450 hours. I've been perfectly happy with a NOS RCA 5U4G as a replacement, and have >1,300 hours on the one currently installed in my amp. Check https://www.surplussales.com//Tubes-Sock-Acc/0-5/TubesListed-5.html - they have them for $20. No affiliation, just a satisfied customer here.

Back to top

Roon Nucleus>Schiit Gungnir MB>Schiit Freya+>SE34I.5>Spatial Hologram M3 Turbo S & Rythmik F25 sub (main system); Schiit Bifrost 2>Schiit Freya>Torii Mk4>DM945 (second system)

IP Logged

DVDMike

Verified Member

Posts: 31

Re: Rachel has No power
Reply #12 - 01/30/22 at 17:30:08

I’ve ordered the new rectifier tube. Thanks for the recommendation.

But what about replacement fuses? The manual does not specify voltage?

“The fuse is a 3 amp, 20mm glass fuse. “

I’ve seen 125v and 250v fuses. My house power is 120v. IM not sure if that makes a difference here or not. But what I’m finding is most of the fuses are 250v.

Back to top

IP Logged

hdrider

Seasoned Member

On the path with
Decware.

Posts: 704

Re: Rachel has No power
Reply #13 - 01/30/22 at 17:33:48

I saw a post here for the 5U4WG from the same vendor (35.00ea) a few months ago so I ordered three for my Rachael, CSP3, ZP3. They were a great vendor to deal with, tubes arrived in good condition. Installed them and let them run for a while in normal household usage and was impressed enough that I ordered another trio for back up. Great tube and vendor, in my experience. Also no affiliation, just a very satisfied customer. Happy listening, Chris.

Back to top

CSP3, Rachael, ZP3, ZMC 1, Sony ES Bluray, Schitt Bitfrost DAC,Sota Star TT w/ FR-64, Hana SL Low Output Moving coil, Omega 7XRS Mk 2 walnut, DeepOmega 8 sub, Beldon 8402/Switchcraft IC's, Gamma Electrostatic phones.

IP Logged

Archie Seasoned Member Posts: 2731	Re: Rachel has No power Reply #14 - 01/30/22 at 18:35:18 W=A X V so wouldn't voltage for the fuse make a difference?
Back to top	ZLC Technics 1200G TT w/ Ortofon Jubilee MC cart ZMC1 ZP3 (25th A Mods) ZR2 (25th A Mods) CSP3 (25th A mods) ZMA (25th A mods) Homemade Big Betsy Speakers (F15s) Silver Cabling DIY Isolation platforms under amps & TT. IP Logged

Lon Seasoned Member "Love without guts is worthless!" Philip K. Dick Posts: 25756	Re: Rachel has No power Reply #15 - 01/30/22 at 18:36:59 Those I have used are 250v, slow blow.
Back to top	HR-1,ZBIT,ZROCK3,SEWE300B,CSP3-25mod; Rega RP3 all GrooveTracer mods;PSAudio:PST+DSD, DAC Mk II, P15,NPC,PowerBases,AC-12 pwr cbls, Reference spkrcbls; Mapleshade SamsonV3; VooDoo:Cremona+Amati interconnects;Stack EQ; headphones: Sennheiser HD800S,ZMF Ori,Oppo PM1 IP Logged

Archie Seasoned Member Posts: 2731	Re: Rachel has No power Reply #16 - 01/30/22 at 18:58:29 Just follow the manual for fuses.
Back to top	ZLC Technics 1200G TT w/ Ortofon Jubilee MC cart ZMC1 ZP3 (25th A Mods) ZR2 (25th A Mods) CSP3 (25th A mods) ZMA (25th A mods) Homemade Big Betsy Speakers (F15s) Silver Cabling DIY Isolation platforms under amps & TT. IP Logged

DVDMike Verified Member Posts: 31	Re: Rachel has No power Reply #17 - 01/30/22 at 21:43:13 I quoted the manual. And I had a question because the manual did not show voltage.
Back to top	IP Logged

4krow

Seasoned Member

IMAGINE WHIRLLED
PEAS

Posts: 1666

Re: Rachel has No power
Reply #18 - 01/30/22 at 22:47:15

I wish that I could give a better answer than the one that I am offering: In short, you will be just fine using a fuse rated at 250v. I don't an answer as to why fuses are rated that way, but of the hundreds of fuses that I have used in building equipment, 250 volt rating is what I see when fuses arrive after ordering.
I owned a Rachel amp for several years with no fuse problems. The fact that yours blew, is saying something is wrong, and a new fuse will not fix it.
I have NOT read all the posts in this thread, so excuse me if I have overlooked something, but yes, the 250v rating is fine.

Back to top

Decware 34I.3 integrated amp/Forte' 3 bass amp/Velodyne SMS-1 bass mngmnt system/Decware ZOB speakers/Audio Nirvana 8" bass drivers/Xiang Seng DAC/ LR Audio Computer/Rega Apollo R CDP/Emotiva ERC3 CDP/BPT 3.0 power cond.

IP Logged

DVDMike Verified Member Posts: 31	Re: Rachel has No power Reply #19 - 02/04/22 at 19:34:31 Rachel is working again after a new rca tube and fuse. This center tube is smaller than that rectifier and it has no light. It gets warm. Do all tubes not light up? 1000k is too small for regular photos without going into an imaging editing app
Back to top	IP Logged

DVDMike

Verified Member

Posts: 31

Re: Rachel has No power
Reply #20 - 02/04/22 at 20:43:40

So this photo should be small enough. You can see the new tube. Note that it had 5 connectors, not 4 like the old one. It installed fine and seems to be working.

Also note that the meters show a value under 40. I though this was higher under the old rectify tube? Is this a problem? Does it mean that I'm not getting my full wattage?

I cannot really compare its current sound to the old sound because I've got it hooked up to different and much less efficient and smaller speakers. It doesn't go particularly loud with these large bookshelf I'm using at the moment. But it does appear to sound outstanding. This observation is completely subjective however.

Back to top

IMG_6445.jpg

IP Logged

Geno Seasoned Member Without music, life would be a mistake. Posts: 2219	Re: Rachel has No power Reply #21 - 02/04/22 at 23:08:57 Mike, Glad you are back in business. But you can do a lot better than the J & J rectifier. Get you a pair of NOS RCA or Sylvania’s. They will smoke that new production rectifier. And as soon as you can, build up a small inventory of the other tubes in your amp. You should have several backups. Best, Geno
Back to top	(2)SE84UFO(Balanced Monoblocs) OR Sansui AU222 Cambrge Audio CXN(ModWright) Crown XLS-1002 SL1210MK5(KAB Mods) Soundsm Aida MKll cart • Darlingt.Labs MP8b Otari MX5050-Bii2 R2R ZLC Power Cond Lii Audio PT-10 OR F-12 OR Betsy Alnico 8"/ W-15 in Open Baffle IP Logged

Carlsbad

Seasoned Member

Posts: 202

Re: Rachel has No power
Reply #22 - 04/04/22 at 01:22:42

I just bought a pre-owned Rachel and am scanning the forums. Ships tomorrow so I won't have it for a week. I currently have a Sophia Baby and might keep it as my primary amp if it had multiple inputs. Huge fan of Sophia and look forward to Decware head to head.

So I was glad to see that Sophia makes a rectifier tube for this amp. Anyone used it? Comments? I may get one on order.

Jerry

Back to top

Decware SE84UFO w/20th mods
Grimm MU1 Streamer
Lampizator Golden Gate 3 DAC
Tekton Encore Speakers

IP Logged

Lon Seasoned Member "Love without guts is worthless!" Philip K. Dick Posts: 25756	Re: Rachel has No power Reply #23 - 04/04/22 at 01:44:12 I use the Sophia Electric Aqua 274B, have in Decware preamps and amps. IMO a great sounding tube. Some have had reliability issues, I have not.
Back to top	HR-1,ZBIT,ZROCK3,SEWE300B,CSP3-25mod; Rega RP3 all GrooveTracer mods;PSAudio:PST+DSD, DAC Mk II, P15,NPC,PowerBases,AC-12 pwr cbls, Reference spkrcbls; Mapleshade SamsonV3; VooDoo:Cremona+Amati interconnects;Stack EQ; headphones: Sennheiser HD800S,ZMF Ori,Oppo PM1 IP Logged