Welcome, Guest. Please Login or Register
Decware Audio Forums
09/17/21 at 19:36:43†


       


Pages: 1
Send Topic Print
My first kit build ever (Read 343 times)
Sonofanengineer
Verified Member
**




Posts: 13
My first kit build ever
08/02/21 at 15:07:57
 
I would like †to thank the members who have posted kit builds and photos. And especially Steve for offering this in a kit form. †My Dad an electrical engineer and instructor, built a Heathkit stereo amplifier and pre amp in the 60ís we listened to it for over 30 years before they moved and it went to goodwill unfortunately. So it got me thinking about tube amps during Covid. Then I purchased an inexpensive Reisong a10 tube amp which sounded nice. Even my wife said it sounded better than an expensive SS amp I own. Which made me wonder how much better a Decware might sound. I had been looking at Decware Amps for some time now and even called the nice folks there who offered to put Steve on the phone to help me but I wasnít close enough to making a decision so I wanted to research more. By then the wait list a little more than blew up. So I decided I would attempt a kit. And here I am.
Since Dad warned me to stay away from electronics at a young age as Iím severely colorblind, it was my first time even soldering. However I did make a few mistakes along the way. I didnít leave enough room for the volume pot (metal Hammond chassis) so I had to remove a small amount of pc board along the edge. And I somehow got a 50k potentiometer instead of the 100k I asked for (Alps). And it works backwards so I wired it incorrectly. I have a new 100k pot now and will correct it. Another enjoyable aspect of the build was I learned quite a bit since I didnít want to just solder parts together, †I wanted to learn what each part did first. †I have a question about my test voltages specifically the D reading it is .2 volts different is that acceptable?
A. 340v
B. 303v
C. 9.4v
D. 2.8v & 2.6v
Upgrades were made to PS .47uf nichicon instead of .33uf and .1uf †mundorf supremes for the coupling caps. †
I am using 6P-15P-EV reflektor output tubes and 6N1P-EV voskhod input tube.
How does it sound? Incredible! When I first fired it up the bass was there but you couldnít feel it at all. After approximately 8 hours or so it came to life and what an absolutely beautiful sound! The soundstage is enormous, wider taller and talk about depth! imaging is incredible. Even my wife has exclaimed I donít remember hearing that on this song before! Precise detail. Late night listening blows my mind! Itís hard to describe the feeling you get when you can hear something you have built come to life!
Back to top
 
 
  IP Logged
Sonofanengineer
Verified Member
**




Posts: 13
D test voltage
Reply #1 - 08/09/21 at 10:50:48
 
Can someone tell me if the .2 voltage differential between channels is acceptable?
Back to top
 
 
  IP Logged
Sonofanengineer
Verified Member
**




Posts: 13
Re: My first kit build ever
Reply #2 - 08/09/21 at 11:06:13
 
I enjoyed building this kit so much I ordered another and will try monoís
Back to top
 
 
  IP Logged
Sonofanengineer
Verified Member
**




Posts: 13
Pic
Reply #3 - 08/10/21 at 10:46:31
 
Attach:      
Back to top
 

61EAD56A-5AF6-46B2-8D9C-12C4BDC9722F.jpeg
  IP Logged
Sonofanengineer
Verified Member
**




Posts: 13
Pic
Reply #4 - 08/10/21 at 10:49:55
 
Attach:      
Back to top
 

19145D2D-4ADB-4CE7-AF54-98E7FF768B97.jpeg
  IP Logged
Sonofanengineer
Verified Member
**




Posts: 13
Pic
Reply #5 - 08/10/21 at 10:54:56
 
Attach:      
Back to top
 

F5B09EE7-BBBE-41B1-A27B-43FD4C686697.jpeg
  IP Logged
Sonofanengineer
Verified Member
**




Posts: 13
Pic
Reply #6 - 08/10/21 at 10:56:28
 
Attach:      
Back to top
 

5F133A0B-3046-4E75-8A36-3602E6BB870E.jpeg
  IP Logged
Sonofanengineer
Verified Member
**




Posts: 13
Pic
Reply #7 - 08/10/21 at 10:58:19
 
Attach:      
Back to top
 

929919C9-B50B-4C7D-9179-B9EC122E9EAD.jpeg
  IP Logged
Sonofanengineer
Verified Member
**




Posts: 13
Transformers arrived after 3 months
Reply #8 - 08/10/21 at 11:00:33
 
Attach:      
Back to top
 

28F522E4-39B3-4FBC-8B03-C84AE0D78BF1.jpeg
  IP Logged
Sonofanengineer
Verified Member
**




Posts: 13
Pic
Reply #9 - 08/10/21 at 11:01:40
 
Attach:      
Back to top
 

3DF4C150-86F0-4B9B-957D-20FC809AF802.jpeg
  IP Logged
Sonofanengineer
Verified Member
**




Posts: 13
Pic
Reply #10 - 08/10/21 at 11:02:51
 
Attach:      
Back to top
 

7827B1C5-E035-481B-88BA-DA84A94E88CB.jpeg
  IP Logged
Sonofanengineer
Verified Member
**




Posts: 13
Pic
Reply #11 - 08/10/21 at 11:03:54
 
Attach:      
Back to top
 

FE969BA8-1D02-4251-861B-0331E20B40BD.jpeg
  IP Logged
JBzen
Seasoned Member
****




Posts: 352
Re: My first kit build ever
Reply #12 - 08/10/21 at 12:58:34
 
Sonofanengineer,

Nice job and congratulations on your build.

If you are not noticing any issue with balance when listening then I would say the .2 difference on the cathode voltages is acceptable. If there is unbalance, be careful, it could be caused by many more things other than a .2 voltage difference on the cathode pre!

John
Back to top
 
 

AMC CD8b>XO3>Cambridge CXN2>(ASKA>Wicket One>)Stokes DAC>low dilectric 5-9s silver>ZKIT1 Milflex copper 25th>cotton clad #8 silver plate>lii Crystal 10 in Huijgen cabinets. Ortofon 2M Bronze>JVC QL-F4>Sims isolation>ZP3. DIY Isolation>AC filtering>Room treatment
  IP Logged
Sonofanengineer
Verified Member
**




Posts: 13
Re: My first kit build ever
Reply #13 - 08/10/21 at 18:33:31
 
Thank you for the reply JBzen! I have not noticed and difference in balance it seems to image quite well between speakers I am using somewhat efficient speakers, ZU Audio Omen DWís. They seem to be a nice match.
Back to top
 
 
  IP Logged
Steve Deckert
Administrator
*****


If the 1st watt
sucks why continue?

Posts: 5184
Re: My first kit build ever
Reply #14 - 08/10/21 at 20:49:47
 

Quote:
Itís hard to describe the feeling you get when you can hear something you have built come to life!


There is no better feeling, and it never leaves.

Steve

Back to top
 
 
WWW   IP Logged
Pages: 1
Send Topic Print