These are the first prototype baffles that I made to see if I liked the open baffle sound, and especially the Betsy. They aren't too pretty, but they work! (See my thread in the DIY section for more info on my journey with these.) The baffle and base are made from 1/2" MDF that has been glued and clamped together so that they are 1" thick. The back supports are just from an old 2x4 I had laying around. On this version, the driver would mount to the front side of the baffle.
Rather than break them up and toss them in the trash, I thought that there might be someone relatively local who wanted to try the sound of a Betsy in an open baffle. These were inspired by the low barrel baffles by Caintuck Audio, and are close to the same size as those. So, if you went this route and liked the sound (but not the looks), you could then get in contact with Randy (Caintuck) or Steve (Decware) and get a pair of their awesome baffles (or make a nicer pair yourself).
These DO NOT include the Betsy drivers! You would need to buy those separately from Doug of Wild Burro Audio.
They also do not include binding posts or hookup wire. (For $40, I'd be willing to buy and install the same style post that I originally used, and get them wired up.)
Again, no shipping! Pick up near Winston-Salem, NC.
Chris
" alt="" title="" border="0" />
Pages: 1
DIY'd Betsy Baffle - FREE - Local Pickup in NC (Read 2319 times)
