Forums - 25th Anniversary power handling

Alex

Seasoned Member

Offline

Posts: 136

25th Anniversary power handling
08/11/20 at 01:58:13

Hi folks,

I am contemplating building an Open Baffle for Lii's Crystal-10 and the W-15. Does anyone know if the SE84UFO25 produces enough power to drive the W-15?
The specs on the W-15 read as the following:
Technical Data:
1. Related power – Maximum power 100 – 150W
2. Nominal inpedance Z 8+8 Ohm
3. Frequency response fu-5000 Hz
4. Mean sound pressure level 91dB(2.83V/1m)
5. Resonance frequency fs 28 H

I do plan on having an XO built as well.

Thank you folks.

Back to top

IP Logged

Share:

Likes:

Geno

Seasoned Member

Offline

Without music, life
would be a mistake.

Posts: 2345
Pearl, MS

Re: 25th Anniversary power handling
Reply #1 - 08/11/20 at 02:27:48

Hi Alex. A good way to handle this is to have a separate subwoofer amp to drive the W-15’s. For example, I have Crystals in their own baffles, with 12” woofers in their own baffles, as well as a powered sub.

The Crystals, subwoofer amp, and the powered sub are all three connected to the amplifier speaker terminals. Then the speaker connections on the subwoofer amp are connected to the W-15’s.

The sub amp has crossover and volume controls. For example, mine is crossed at 80hz. This way, frequency’s are split between the Crystals and the W-15’s.

Back to top

Bottlehead Stereomour ll or Sansui AU222
Cambridge Audio CXN(ModWright)
Technics SL1210 MK5(KAB Mods) London Decca Maroon cart
Darlington Labs MP8b phono preamp
Otari MX5050-Bii2 R2R
Decware Zbit
EcoFlow Delta 3 Classic
Altec Valencia 846b

IP Logged

Share:

Likes:

Alex Seasoned Member Offline Posts: 136	Re: 25th Anniversary power handling Reply #2 - 08/11/20 at 02:37:22 Thanks for the response Geno. And you system sounds good with this setup? The person building my XO suggested i get the following amp for the W-15.
Back to top	IP Logged Share: Likes:

Geno Seasoned Member Offline Without music, life would be a mistake. Posts: 2345 Pearl, MS	Re: 25th Anniversary power handling Reply #3 - 08/11/20 at 02:58:21 I love the sound with this setup. What sub amp are you considering? I’m using the Crown XLS 1002 thanks to forum member Palomino.
Back to top	Bottlehead Stereomour ll or Sansui AU222 Cambridge Audio CXN(ModWright) Technics SL1210 MK5(KAB Mods) London Decca Maroon cart Darlington Labs MP8b phono preamp Otari MX5050-Bii2 R2R Decware Zbit EcoFlow Delta 3 Classic Altec Valencia 846b IP Logged Share: Likes:

Alex Seasoned Member Offline Posts: 136	Re: 25th Anniversary power handling Reply #4 - 08/11/20 at 03:04:36 This is the amp that was recommended: https://www.parts-express.com/dayton-audio-sa25-25w-subwoofer-plate-amplifier--3...
Back to top	IP Logged Share: Likes:

Alex Seasoned Member Offline Posts: 136	Re: 25th Anniversary power handling Reply #5 - 08/11/20 at 03:07:32 That's an expensive amp Geno. Who knows, I may go for it. The XO that will be built is Lionidas OB XO.
Back to top	IP Logged Share: Likes:

Geno Seasoned Member Offline Without music, life would be a mistake. Posts: 2345 Pearl, MS	Re: 25th Anniversary power handling Reply #6 - 08/11/20 at 03:56:03 If you go Dayton, the SA100 would serve your needs better. That’s what I had before. Pretty inexpensive. I’ve followed Lionidas pretty closely on the Lii Website. Pretty cool stuff. I’m not sure what he’s using for power, and how he has that power distributed.
Back to top	Bottlehead Stereomour ll or Sansui AU222 Cambridge Audio CXN(ModWright) Technics SL1210 MK5(KAB Mods) London Decca Maroon cart Darlington Labs MP8b phono preamp Otari MX5050-Bii2 R2R Decware Zbit EcoFlow Delta 3 Classic Altec Valencia 846b IP Logged Share: Likes:

Alex

Seasoned Member

Offline

Posts: 136

Re: 25th Anniversary power handling
Reply #7 - 08/12/20 at 02:32:35

So you do not have a crossover on the Crystal, just the woofer? I thought the way it would work would be the XO would channel the highs and mids to the Crystal 10 while the low signal would be channeled to the woofer. It seems like your setup only has the XO on the woofer. Does this mean some of the bass is also going to the Crystal 10?

Back to top

IP Logged

Share:

Likes:

Geno Seasoned Member Offline Without music, life would be a mistake. Posts: 2345 Pearl, MS	Re: 25th Anniversary power handling Reply #8 - 08/12/20 at 17:51:32 All of the Lii drivers are full range. No crossover required.
Back to top	Bottlehead Stereomour ll or Sansui AU222 Cambridge Audio CXN(ModWright) Technics SL1210 MK5(KAB Mods) London Decca Maroon cart Darlington Labs MP8b phono preamp Otari MX5050-Bii2 R2R Decware Zbit EcoFlow Delta 3 Classic Altec Valencia 846b IP Logged Share: Likes:

Alex Seasoned Member Offline Posts: 136	Re: 25th Anniversary power handling Reply #9 - 08/16/20 at 02:42:28 Thank you Geno. Just trying to get the best sound possible.... even though my Crystals sound very good right now.
Back to top	IP Logged Share: Likes:

GroovySauce

Seasoned Member

Offline

Posts: 936
East Tennessee

Re: 25th Anniversary power handling
Reply #10 - 08/19/20 at 20:13:06

Alex, Looks like we are working in the same direction.

I currently have 2 C10. I'm looking to get 4x W15 and make a XO. I'm planning on crossing them over quite high. 500-1000hz. Hard to say until I can play with the W15. In this case I would use a XO for both the C10 and W15s

I'm a complete newbie on DIY speakers, so this is might be more of a learning experience for me than useful or accurate information.

Geno offers a very practical solution, which I'm guessing delivers great results.

If you go with the plate amp option IF the C10 naturally rolls off at let's say 150hz you can then use the XO and gain on the plate amp to match the frequency and levels so you have a very smooth frequency response. In this case you wouldn't need a XO on the C10 at all which might be the ticket you are looking for.

Check out GR Researchs Youtube channel the first dozen or so of their Tech Talk series I found very educational.

Keep us posted!

Back to top

IP Logged

Share:

Likes: