Welcome, Guest. Please Login or Register
Decware Audio Forums
05/01/25 at 08:42:14 



Most recent 50 posts

Forums › EQUIPMENT FORUMS › ZP3 / ZMC1,2,3 ‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
ZMC 1hook up (Read 4475 times)
Cmason
Verified Member
**




Posts: 2
ZMC 1hook up
12/04/18 at 01:54:55  
Just purchased the ZMC SUT for Mc cartridge,can someone tell me which are the turntable inputs and which is the output.Thanks in advance.
Back to top
 
 
  IP Logged
pursuitofnow
Seasoned Member
****




Posts: 466
Re: ZMC 1hook up
Reply #1 - 12/04/18 at 05:15:06  
The inputs are closer to the inside of the box and the outputs closer to the outside of the box.
Back to top
 
 
VPI Classic Signature | Urushi Black | Sky 20 | ZP3 | SDFB
DirectStream DAC (APS nickel transformers, Vocm mod)
ZTPRE | ZBIT | ZROCK3 SDFB | SE84UFO3
Omega Super 3 HO XRS | Deep 8
Zenwave D4 | PCR-11 | PI Audio Uberbuss
  IP Logged
bikehappy1
Seasoned Member
****




Posts: 189
Re: ZMC 1hook up
Reply #2 - 12/30/19 at 22:53:55  
Question: If I have a 0.5mv MC cartridge with 5ohms (or so like an ortofon) resistance and a ZMC1 with 1:20 step up, does that mean there's 10mv coming out of the ZMC1? That would be twice as much as the 2M series.
Back to top
 
 
Home: Torii MKIV-25, ZP3-25, HR-1’s, ZLC, DSR, DHC-1, PSA DSD, ZRock2, SA8005, Zenstiyx, VPI Prime, Hana ML, ZMC1.
Work: SE84UFO-25, Schiit modi, Trapeziums, MacBook air, Audirvana aiff. Also have a pair of ESS AMT 1C’s in workout room with a cxnv2.
  IP Logged
Archie
Seasoned Member
****




Posts: 2731
Re: ZMC 1hook up
Reply #3 - 12/30/19 at 23:11:35  
My understanding is that the 0.5mV into the ZMC1 becomes 10mV out of the ZMC1 just as you said.  As I recall, my 0.5mV MC cart with the ZMC1 plays louder than my 5mV MM cart.
Back to top
 
 
ZLC
Technics 1200G TT w/ Ortofon Jubilee MC cart
ZMC1
ZP3 (25th A Mods)
ZR2 (25th A Mods)
CSP3 (25th A mods)
ZMA (25th A mods)
Homemade Big Betsy Speakers (F15s)
Silver Cabling
DIY Isolation platforms under amps & TT.
  IP Logged
Pages: 1
Send Topic Print
Forums › EQUIPMENT FORUMS › ZP3 / ZMC1,2,3 ‹ Previous topic | Next topic ›







Forums » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.


Source Forge