Welcome, Guest. Please Login or Register
Decware Audio Forums
10/15/24 at 16:50:29 




Most recent 50 posts

Pages: 1
Send Topic Print
What cables are you using with your ZMA? (Read 6057 times)
HockessinKid
Seasoned Member
****




Posts: 1154
What cables are you using with your ZMA?
04/01/17 at 18:14:34
 
I am looking for input from Mystery amp owners on their cable choices, particularly interconnects and speaker cable.  I would like to upgrade and will be using the Mystery amp in combination with a Decware CSP3 preamp.  Thanks.

HK
Back to top
 
 

Nottingham Interspace TT w/ Audio Technica AT-OC9XML cart & Modwright PH 9.0XT phono preamp OR MWI modded Cambridge CNX V2 > CSP3-25th A preamp > ZMA-25th A amp > PI Audio UberBUSS > Caintuck Audio Lii15 Magnum speakers > SDFB's > SRA & ZenWave cables
  IP Logged
Dave1210
Seasoned Member
****




Posts: 959
Re: What cables are you using with your ZMA?
Reply #1 - 04/03/17 at 01:18:04
 
HK...what are you currently using for cables?

IMO...I have tried a few different cables and find that smaller gauge cables let through more detail and harmonics.  I currently use Audience cables.


Back to top
 
 
  IP Logged
Lonely Raven
Seasoned Member
****


Jack of all Trades,
Master of None

Posts: 3567
Re: What cables are you using with your ZMA?
Reply #2 - 04/03/17 at 21:24:31
 
I got the balanced upgrade for my ZMA - I find that balanced cables are less finicky than unbalanced. I have just a regular pair of decent $100 1.5M cables from...Morrow I think they are. I really don't hear much improvement until I start plugging in some $1000+ cables

I tend to like silver speaker cables, so I'm using some triple braided 10AWG silver plated milspec wire that's similair to the Decware Styx, just 10AWG instead of 8AWG. I also have used some actual raw Decware Styx wire I found a whole spool of in the back of a warehouse, but when other people heard them they offered to buy them off me and I've not made another pair.  

I feel that silver or silver plated speaker wire can make edgy sounding systems more edgy - But my system is pretty neutral/honest so it's very garbage in - garbage out. Good recordings sound amazing, and bad recordings don't play for long at my place. LOL

Back to top
 
 
WWW Lonely Raven   IP Logged
HockessinKid
Seasoned Member
****




Posts: 1154
Re: What cables are you using with your ZMA?
Reply #3 - 04/04/17 at 22:07:58
 
Dave 1210,

I am using Reality Cables (unshielded 1M RCA's) from sources to my CSP3 preamp.  Then a 3M length of VH Audio Pulsar IC's (shielded) from CSP3 to my ZMA amp.  I also use Reality Cables speaker cable.

The Pulsar interconnect utilizes a FINE (28 AWG), SINGLE high-purity BARE copper center conductor, surrounded by a solid FEP dielectric and is cryogenically treated.  I believe the Reality Cables are cyrogenically treated copper as well.

NB
Back to top
 
 

Nottingham Interspace TT w/ Audio Technica AT-OC9XML cart & Modwright PH 9.0XT phono preamp OR MWI modded Cambridge CNX V2 > CSP3-25th A preamp > ZMA-25th A amp > PI Audio UberBUSS > Caintuck Audio Lii15 Magnum speakers > SDFB's > SRA & ZenWave cables
  IP Logged
DB2
Senior Member
***




Posts: 67
Re: What cables are you using with your ZMA?
Reply #4 - 04/05/17 at 00:23:07
 
HK, what price range are you considering?
Back to top
 
 
  IP Logged
EdGuY
Seasoned Member
****


Fact is just a solid
opinion.

Posts: 133
Re: What cables are you using with your ZMA?
Reply #5 - 04/12/17 at 19:30:26
 
Hi
Interesting, because I tested all possible speaker cables in past two months, finally I think I know something about audio cables too (as
I have worked for more than ten years in the data cable industry).

Choosing the right cable for DIY is not very difficult thing.

1. SILVER or SILVER PLATED COPPER - In tube world where we are at the starting point where everything is too warm, the best result can be achived with silver or good silver plated cable (If your goal is: high resolution, clarity, air, texture, accuracy, realistic bass..).

2. SHIELDED CABLE - You may like some unshielded cables, but once you realise how much more you get with shielded cable, unshielded no longer an option...as long as you remember to ground correctly 😉

3. LOW OF EVERYTHING: low resistance, low inductance and low capacitance. When you chose silver or silver plated cable you're almost there. Make sure that you do not spoil everything by chosing wrong AWG or shitty connectors. I recommend WBT 0610 Ag silver connectors (or any other WBT NextGen connectors. Of course for silver cable silver connectors!).

For bi-wire I also recommend: Mil-Spec AWG 10/12/14/16  4x conductor, shielded silver plated stranded teflon cable (aviation cable). You can also find Mil-Spec 2x conductor version if you do not like to bi-wire.
Back to top
 
 

Tannoy Prestige Canterbury GR,ST-300mg,IsoTek Aquarius EVO3,YARBO power.c,RGC-24,TORII MK3VCaps+silver wires+carbon resitors,CSP2+,DENON DP-A100+Karat17D3,GRADO PH-1,AURALiC Aries,GUSTARD X20-PRO ES9028PRO DAC,WA-Quantum chips,tubes WE 422A,GEC KT66,6N23P,USAF-596
  IP Logged
will
Seasoned Member
****




Posts: 3032
Re: What cables are you using with your ZMA?
Reply #6 - 04/13/17 at 16:35:58
 
Hello EdGuy.

Checking just in case Wink ...wondering if you had intended to post about these tubes on another thread?
Back to top
 
 

All Modified: PSA-P5>DIY Strip/Shunyata Defender>RevolutionMacMini/Amarra-KTE Singxer/Gustardx20pro/ZBIT/ZR2/CSP3>LaoChen 300B/845>Omega SAHOMs/AudioSmile Tweeters,SVS Micro3000>Pi PCs and DIY PCs, ICs, USB, I2S, Speaker>SR and aluminum w ball bearing feet +
  IP Logged
EdGuY
Seasoned Member
****


Fact is just a solid
opinion.

Posts: 133
Re: What cables are you using with your ZMA?
Reply #7 - 04/13/17 at 18:21:40
 
😂😂😂 my bad. Jumping from topic to topic..
Back to top
 
 

Tannoy Prestige Canterbury GR,ST-300mg,IsoTek Aquarius EVO3,YARBO power.c,RGC-24,TORII MK3VCaps+silver wires+carbon resitors,CSP2+,DENON DP-A100+Karat17D3,GRADO PH-1,AURALiC Aries,GUSTARD X20-PRO ES9028PRO DAC,WA-Quantum chips,tubes WE 422A,GEC KT66,6N23P,USAF-596
  IP Logged
Pages: 1
Send Topic Print