Welcome, Guest. Please Login or Register
Decware Audio Forums
12/05/24 at 09:39:27 




Most recent 50 posts

Pages: 1
Send Topic Print
Pro-Ject Measure it 2 help (Read 8855 times)
SonicSeeker
Seasoned Member
****


Listening to the
music not the
equipment

Posts: 433
Pro-Ject Measure it 2 help
01/22/17 at 19:08:48
 
Does anyone have this measurement tool?
I received a simple digital measure gauge with the VPI Friday so I decided to compare the results and my Pro-Ject measures way different than the one sent by VPI by about .8 grams.
The Pro-Ject shows about  .7 grams when the vpi shows 1.5 grams. I also took out the little lever measurement tool that came with the cart and it is closer to the Pro-Ject but registers a little heavier reading than it.
So which one should I trust. Angry
When I set it up with the VPI tool it sounds a bit on the bright side.
When I set it up with the Pro-Ject it sounds much smoother and not as harsh, a little darker.
Back to top
 
 



  IP Logged
SonicSeeker
Seasoned Member
****


Listening to the
music not the
equipment

Posts: 433
Re: Pro-Ject Measure it 2 help
Reply #1 - 01/22/17 at 19:29:19
 
So I compared the little lever tool and the Pro-Ject some more and they seem to read pretty close to each other.
The one issue I have had recently with my old table and now with my new table is the body of the cartridge rubs the label at the end of the album side when the cartridge is set to 1.5 grams with the Pro-Ject. This just started to happen in the last couple months I guess, and this is why I was questioning my measurement devices accuracy. I probably have about 300 to 500 hours on the stylus not sure.
.
Back to top
 
 



  IP Logged
SonicSeeker
Seasoned Member
****


Listening to the
music not the
equipment

Posts: 433
Re: Pro-Ject Measure it 2 help
Reply #2 - 01/22/17 at 19:30:22
 
Ortofon 2M Black
Back to top
 
 



  IP Logged
SonicSeeker
Seasoned Member
****


Listening to the
music not the
equipment

Posts: 433
Re: Pro-Ject Measure it 2 help
Reply #3 - 01/22/17 at 20:02:36
 
Not to keep adding here but 1.5 grams on the ortofon lever, .7 on the Pro-Ject 1.9 on the vpi tool.
Using my 5 gram weight both digital scales read 5 grams, come on!
Back to top
 
 



  IP Logged
JD
Seasoned Member
****




Posts: 537
Re: Pro-Ject Measure it 2 help
Reply #4 - 01/22/17 at 23:03:19
 
Not sure if this helps but on my Rega P6 I use a spacer(2mm i believe) under my arm because the Ortofon 2m Black is so large.

JD
Back to top
 
 
  IP Logged
Archie
Seasoned Member
****




Posts: 2731
Re: Pro-Ject Measure it 2 help
Reply #5 - 01/23/17 at 01:05:50
 
I'm confused as to what exactly the issue is?  Are you getting different readings on the different scales or not?  Changing the weight on the cart will affect the SRA which will affect the sound.  Is this what you are hearing?  (Anti-skate is another issue and one that might need fine tuning.)  Once you figure out the scale thing you can fine tune the SRA via tonearm height if that adjusts on your VPI.

You might need a smaller test weight since the scales could be non-linear and you need to know accuracy closer to the VTF you're looking for.

But maybe none of this is what you're asking?   Lips Sealed
Back to top
 
 

ZLC
Technics 1200G TT w/ Ortofon Jubilee MC cart
ZMC1
ZP3 (25th A Mods)
ZR2 (25th A Mods)
CSP3 (25th A mods)
ZMA (25th A mods)
Homemade Big Betsy Speakers (F15s)
Silver Cabling
DIY Isolation platforms under amps & TT.
  IP Logged
hdrider
Seasoned Member
****


On the path with
Decware.

Posts: 699
Re: Pro-Ject Measure it 2 help
Reply #6 - 01/23/17 at 01:54:56
 
Sonic - I would reach out to VPI on Monday, but what about splitting the difference? How does that sound? Happy Listening, Chris.
Back to top
 
 

CSP3, Rachael, ZP3, ZMC 1, Sony ES Bluray, Schitt Bitfrost DAC,Sota Star TT w/ FR-64, Hana SL Low Output Moving coil, Omega 7XRS Mk 2 walnut, DeepOmega 8 sub, Morrow Audio PH3 and MA3 IC's, Gamma Electrostatic phones.
  IP Logged
SonicSeeker
Seasoned Member
****


Listening to the
music not the
equipment

Posts: 433
Re: Pro-Ject Measure it 2 help
Reply #7 - 01/23/17 at 19:39:42
 
OK so the meter is bad, (Pro-Ject).
I looked up the weight of a cent, dime and nickel, and the inexpensive digital meter that came with the VPI reads accurately and the Pro-Ject is way off.
Problem solved.
So I have been running my stylus heavy for a while hope I did not damage it.
Back to top
 
 



  IP Logged
Archie
Seasoned Member
****




Posts: 2731
Re: Pro-Ject Measure it 2 help
Reply #8 - 01/24/17 at 18:09:04
 
Quote:
So I have been running my stylus heavy for a while hope I did not damage it.


I doubt you'd damage the cart but you may have been hearing things with an SRA different enough to notice.  Can you hear a difference?  If so, which do you prefer?
Back to top
 
 

ZLC
Technics 1200G TT w/ Ortofon Jubilee MC cart
ZMC1
ZP3 (25th A Mods)
ZR2 (25th A Mods)
CSP3 (25th A mods)
ZMA (25th A mods)
Homemade Big Betsy Speakers (F15s)
Silver Cabling
DIY Isolation platforms under amps & TT.
  IP Logged
Syd
Seasoned Member
****




Posts: 1534
Re: Pro-Ject Measure it 2 help
Reply #9 - 01/25/17 at 11:11:51
 
My digital gauge has 2 or 3 ranges. Gramms, ounces, and maybe another. It has 3 buttons : on/off, one to zero the calibration, one for unit of measurement.
Back to top
 
 

Decware: Rachaels x 2 bridged, C. SP2+, ZP3, ZMC1, DHC-1 pw/cbl`s Michell Orbe + SME V + M.Benz LP s, Arcam CD33, Nakamichi LX5, Lowther acoustas DX2`s, WE 16g sp/cbl`s, Isotek mains substation, M & K subwoofer, Belden 8402 interconnects.
  IP Logged
SonicSeeker
Seasoned Member
****


Listening to the
music not the
equipment

Posts: 433
Re: Pro-Ject Measure it 2 help
Reply #10 - 01/26/17 at 17:48:17
 
I prefer it at the proper weight.
I checked to make sure it was set on grams every time I used it.
Back to top
 
 



  IP Logged
Archie
Seasoned Member
****




Posts: 2731
Re: Pro-Ject Measure it 2 help
Reply #11 - 01/26/17 at 19:06:44
 
Quote:
I prefer it at the proper weight.


Have you looked into SRA setup?  Sounds like Ortofon got your cart set up well from the factory.  (Just in case this is a new subject ...)  Contact line stylus need careful alignment to give their best.  Ideally, at the recommended VTF everything should be aligned.  I have an Ortofon Kontrapunkt b that I had to shim tail down to get things right since the cantilever was several degrees steeper than spec'd.  If the diamond is properly aligned with the cantilever, VTA can be used for proper set up and it's easier to see than the microscopic contact line of the stylus!  Changing VTF can significantly change SRA -- especially for high compliance carts (soft suspensions).
Back to top
 
 

ZLC
Technics 1200G TT w/ Ortofon Jubilee MC cart
ZMC1
ZP3 (25th A Mods)
ZR2 (25th A Mods)
CSP3 (25th A mods)
ZMA (25th A mods)
Homemade Big Betsy Speakers (F15s)
Silver Cabling
DIY Isolation platforms under amps & TT.
  IP Logged
Pages: 1
Send Topic Print