Welcome, Guest. Please Login or Register
Decware Audio Forums
05/01/25 at 16:32:54 



Most recent 50 posts

Forums › AUDIO FORUMS › General Discussion and Support ‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
Low level hum in CSP2+ (Read 2578 times)
Hibuckhobby
Verified Member
**




Posts: 21
Low level hum in CSP2+
03/15/16 at 15:23:07  
Title says it all.  It's not real loud and I don't notice it when music is playing.  I have changed rectifiers, but that didn't impact it.  Just occurred to me to swap left and right driver tubes, but they have to cool down first  ;)

If that doesn't do it, any suggestions as to where to look next?
regards,
Hibuck....
Back to top
 
 
  IP Logged
Steve Deckert
Administrator
*****


If the 1st watt
sucks why continue?

Posts: 6397
Re: Low level hum in CSP2+
Reply #1 - 03/19/16 at 02:17:40  
First find out if the low level hum is on both channels.  

Find out if the hum goes away when you disconnect all of the input RCA cables from the CSP3.

Make sure your output level controls are not turned all the way up.
Back to top
 
 
WWW   IP Logged
Pages: 1
Send Topic Print
Forums › AUDIO FORUMS › General Discussion and Support ‹ Previous topic | Next topic ›







Forums » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.


Source Forge