So I've got slight but present static in my left channel when using my digital source. It's a squeezebox. Nothing in my right. The static is only really noticeable during quiet passages. It's in the left channel despite what input I switch to. It goes away if I turn off that channel. I've moved the squeezebox and the static stayed the same. Any thoughts?

hello,

if by static you mean a crackling noise and if it does indeed come from the MT, it is probably the 47k carbon comp resistor that needs replacement. I had a few die on me and I once inadvertently used a 1/3 watt naked z foil in that position (power rating way too low).

Cracke crackle

Ok, more troubleshooting completed... it was not the 0C2 tube.
I have tried 3 different input tubes, and 2 0C2 and 0A3 tubes. The noise stays with the channel. I swapped the speakers as well as the input tubes across channels and no different.

I have concluded it is inside the MT, the resistor mentioned above is very likely. I have messaged Steve on the forums as I do not have the new email address for Steve.

I will call in on Monday.

Thanks again for the help.

Steve's newest email is Steve@zenamps.com