Forums - Optional Exotic woods

Dominick

Seasoned Member

Still like that old
time Rock and Roll!!

Posts: 1422

Optional Exotic woods
08/26/13 at 13:52:49

I am seriously considering a new Torii MK IV and have 2 questions about the optional exotic woods.

1. By checking off that option, does it give me free range to pick an exotic wood that I like (KOA, Rosewood, Purpleheart) or are there some limitations ? I know that some woods are not only harder to acquire, but also more difficult to work with.

Also, if there any Decware owners with a specific exotic wood, can you please post a picture of your amp here so I can get a better idea of what it will look like.

2. I know from playing an acoustic guitar that an exotic wood has certain tonal properties. As crazy as this sounds, does this hold any weight with adding a specific exotic wood to a new Decware amp, specifically a Torii. My gut and saying no, but then again, I have no idea either.

Any input would be greatly appreciated.

Dom

Back to top

Rasp. Pi 4 [Roon], Schiit Bifrost True Multibit DAC, ZBIT, ZROCK2, My Audio Cables Ultra Silver+, ZSB, CSP2+ 25th, DAG Cables, DHC1, Torii MKIV 25th /2 White Zen SE84C+ 25th mono’s, Rega P2 Turntable, White top ZP3, Velodyne Dual Firing Sub, ERR’s [Bubbinga Wood]

IP Logged

ZYGI

Seasoned Member

HR-ONE

Posts: 757

Re: Optional Exotic woods
Reply #1 - 08/26/13 at 20:15:09

Hey Dom,

The only limitations is if we can get the wood. In cases where the wood was hard to obtain we went with a a veneer and a substrate wood which is either complementary or totally contrasting, which ever wood look the best.

For the most part, maple seems to be the wood of choice, which works well with almost any veneer over it. You only see the substrate wood when looking directly down from the top.

As far as making the amp sound different/better....highly doubtful in my opinion.

Zygi

Back to top

All Decware amps and sources, Turning Point Audio speakers

IP Logged

Dominick Seasoned Member Still like that old time Rock and Roll!! Posts: 1422	Re: Optional Exotic woods Reply #2 - 08/26/13 at 21:02:54 Thanks for the info. ZYGI. I personally like the Rosewood and KOA woods. I know Purpleheart is hard to come across, and is used as a compliment/accent. My cigar box has Purpleheart inlaid, and it really gives it a nice touch.
Back to top	Rasp. Pi 4 [Roon], Schiit Bifrost True Multibit DAC, ZBIT, ZROCK2, My Audio Cables Ultra Silver+, ZSB, CSP2+ 25th, DAG Cables, DHC1, Torii MKIV 25th /2 White Zen SE84C+ 25th mono’s, Rega P2 Turntable, White top ZP3, Velodyne Dual Firing Sub, ERR’s [Bubbinga Wood] IP Logged

Lon

Seasoned Member

"Love without
guts is
worthless!"
Philip K. Dick

Posts: 25754

Re: Optional Exotic woods
Reply #3 - 08/26/13 at 21:10:32

I have a purpleheart fingerboard on a fretless bass I have made by luthier Steve Wishovsky (Wishbass). The bass body itself is persimmon and the neck is a sandwich of maple, purplewood and mahogany that though it has a flat fingerboard is otherwise shaped a lot like the neck of contrabass violin. Odd looking but really expressive (has one pickup and a volume control only, you really have to work to make the sounds yourself).

Purpleheart is really nice as a fingerboard.

Back to top

HR-1,ZBIT,ZROCK3,SEWE300B,CSP3-25mod; Rega RP3 all GrooveTracer mods;PSAudio:PST+DSD, DAC Mk II, P15,NPC,PowerBases,AC-12 pwr cbls, Reference spkrcbls; Mapleshade SamsonV3; VooDoo:Cremona+Amati interconnects;Stack EQ; headphones: Sennheiser HD800S,ZMF Ori,Oppo PM1

IP Logged

Dominick

Seasoned Member

Still like that old
time Rock and Roll!!

Posts: 1422

Re: Optional Exotic woods
Reply #4 - 08/26/13 at 23:55:13

That sounds like a beauty of a bass guitar Lon. Having played the guitar with different types of woods, it's amazing how they all have their own unique sound.

I am a big fan of wood in general... it's very warm and inviting. My entire bedroom set is handcrafted Rosewood that was imported from Japan. Took 8 months to build, but totally worth the wait.

Purpleheart is not cheap, but its just unique.

Back to top

Rasp. Pi 4 [Roon], Schiit Bifrost True Multibit DAC, ZBIT, ZROCK2, My Audio Cables Ultra Silver+, ZSB, CSP2+ 25th, DAG Cables, DHC1, Torii MKIV 25th /2 White Zen SE84C+ 25th mono’s, Rega P2 Turntable, White top ZP3, Velodyne Dual Firing Sub, ERR’s [Bubbinga Wood]

IP Logged

Lon

Seasoned Member

"Love without
guts is
worthless!"
Philip K. Dick

Posts: 25754

Re: Optional Exotic woods
Reply #5 - 08/27/13 at 01:02:20

I'm a big fan of wood as well. On my mother's side I come from a long line of cabinet makers and other wood workers, the ultimate one of which may have been my great-great-great-great-great grandfather, organ builder David Tannenberg. My grandfather never made a living working in wood, but he worked in wood all his spare time as his father had taught him making grandfather clocks, pool tables, and many more things, including a "scooter" for me that was out of this world (when I was 8!).

Interesting what wood can do for guitars. I have a mahogany Stratocaster that sounds like no other Strat I've ever played, deep and warm in great measure. A truly original sound compared to the standard strat.

Back to top

HR-1,ZBIT,ZROCK3,SEWE300B,CSP3-25mod; Rega RP3 all GrooveTracer mods;PSAudio:PST+DSD, DAC Mk II, P15,NPC,PowerBases,AC-12 pwr cbls, Reference spkrcbls; Mapleshade SamsonV3; VooDoo:Cremona+Amati interconnects;Stack EQ; headphones: Sennheiser HD800S,ZMF Ori,Oppo PM1

IP Logged

Dominick

Seasoned Member

Still like that old
time Rock and Roll!!

Posts: 1422

Re: Optional Exotic woods
Reply #6 - 08/27/13 at 05:03:04

Now that is impressive!! Very cool !! It's difficult to find a good woodworker these days....talk about a lost art.

Conversely my granfather was a master welder who worked on the Brooklyn Navy Yard during the war. He basically bent and fused metal his entire life. But it was from my Grandfather that I learned how to play the guitar when I was young.

Back to top

Rasp. Pi 4 [Roon], Schiit Bifrost True Multibit DAC, ZBIT, ZROCK2, My Audio Cables Ultra Silver+, ZSB, CSP2+ 25th, DAG Cables, DHC1, Torii MKIV 25th /2 White Zen SE84C+ 25th mono’s, Rega P2 Turntable, White top ZP3, Velodyne Dual Firing Sub, ERR’s [Bubbinga Wood]

IP Logged

Lon Seasoned Member "Love without guts is worthless!" Philip K. Dick Posts: 25754	Re: Optional Exotic woods Reply #7 - 08/27/13 at 11:14:18 I have great respect for master welders! I spent my first working decade assembling machinery and otherwise working with metal. Not for sissies.
Back to top	HR-1,ZBIT,ZROCK3,SEWE300B,CSP3-25mod; Rega RP3 all GrooveTracer mods;PSAudio:PST+DSD, DAC Mk II, P15,NPC,PowerBases,AC-12 pwr cbls, Reference spkrcbls; Mapleshade SamsonV3; VooDoo:Cremona+Amati interconnects;Stack EQ; headphones: Sennheiser HD800S,ZMF Ori,Oppo PM1 IP Logged

Dominick

Seasoned Member

Still like that old
time Rock and Roll!!

Posts: 1422

Re: Optional Exotic woods
Reply #8 - 08/27/13 at 12:40:51

Welding is definitely not for sissies!! I always wanted to learn the trade. He used to build everything from brackets to shelving, custom fishing sinkers, and even his own music and mic stands.

My uncle currently has his vintage Gibson L4 and Epiphone..... talk about beauty!! Been a while since I played it, but it has such a sweet sound.

Back to top

Rasp. Pi 4 [Roon], Schiit Bifrost True Multibit DAC, ZBIT, ZROCK2, My Audio Cables Ultra Silver+, ZSB, CSP2+ 25th, DAG Cables, DHC1, Torii MKIV 25th /2 White Zen SE84C+ 25th mono’s, Rega P2 Turntable, White top ZP3, Velodyne Dual Firing Sub, ERR’s [Bubbinga Wood]

IP Logged