Ever wonder where the Zen Triode Integrated got the name Rachael?  Well, it was named by the man who has built virtually almost every SE34I to date, Denis Hazen, my top amp builder.  This is HIS amplifier, which he named Rachael.  So it brings some unique history to the table having been lovingly tweaked all these years.  This was the actual amplifier that the Christmas Comes Early Mod was invented with.  Also known as the Hazen Grid mod it is now standard fair in almost all of our amplifiers. That makes this the most unique SE34I available, and since these things don't break or wear out, the value is sure to increase over time.

For those who don't recall, this is the original Zen Triode Integrated, model SE34I, with four output tubes and four output transformers.  There are many ways you can configure this amplifier, but the way Denis ran it was in a biamp configuration where one set of output tube ran a pair of high efficiency bass cabinets and the other set of output tubes ran a sweet pair of bookshelf speakers setting on top of the bass cabs.  It was amazing good that way.



Ever wonder if it's true - that Decware amps get better sounding with age - this amp will make a quick point of it.

We are selling it as a demo amp with a lifetime warranty to the buyer, direct from Decware.  Contact me via my e-mail zen@decware.com

This unit is configured with a single pair of inputs and dual volume controls.  It also has the optional and expensive 6922 preamp option built in, which gives it some real slam... $1200 OBO.  Can ship immediately, no 12 week wait!  Already burned-in.  New tubes will be provided if the asking price is met.  Lower offers will not come with tubes.

Thanks,

Steve

This won't last . . . Half of what it's worth.

Steve Deckert said, Quote:


meaning this amp has a tubed pass through pre out, that went to another amp for the bass cabs, not powered out to them?

this amp is 6 watts x 2? preferred impedance?

it is like having a four discrete channel amp on the outputs. Each of the dual left and right channels are fed by a stereo built-in pre consisting on one input dual triode and two dual triode driver tubes which I think each of the 4 total driver sections is does duty for each el34 output stage. Not sure about that last statement. Steve?

Original SE34 Integrated amps had the inboard and outboard set of tubes wired in different triode config. One was so called "british" triode circuit and the other was Decware "Zen" triode. Denis at some point long ago wired his SE34I with all four channels in Zen triode. Therefter continued modification until the Hazen grid mod. I think this is complete but prolly not.

But to answer Jason I think Steve is saying that the left side and right side power tube sets were individually running the mid/tweet cabinets and the bass cabinet on each stereo side on Denis' set-up. That is onle left power tube running main speaker and one left power tube running the bass. Likewise for the right side. No other amp involved here. So that is 3.5 wpc to 8ohms per EL34.
Mine is a "Rachel" like Denis' and I run it almost exclusively with the four binding posts on each side bridged in parallel with two jumper wires black to black red to red. That nets supposedly 7wpc but when you hear it it can get almost as loud as a "blue" original TORII (Mk1). Pretty amazing 7 watts of triode. On the right speakers it is heavenly.

http://www.tnt-audio.com/ampli/decwarese34i_e.html
Don
(go for it!)

I always like to ask the obvious question, "what amp did he upgrade to?"

Aww shucks! My amp is arriving in the mail any minute now...
I don't have another 1200 to shell out. :-\