Forums - input level and output level controls new csp2+

06/28/26 at 14:55:58

Most recent 50 posts
Welcome, Guest. Please Login or Register

Forums » CSP, CSP2, CSP2+

‹ Previous topic | Next topic ›

Pages: 1

input level and output level controls new csp2+ (Read 10500 times)

Seasoned Member

Offline

Posts: 569

input level and output level controls new csp2+
11/20/12 at 00:58:34

Just received my csp2+ and finished setting it up...where do you guys have the input and output levels set at? In the notes Steve says that the pots can be set to factory calibration,would that mean that the lines on the pots should be facing 12 o'clock for the output and input levels? Right now I have my outputs at 12 but input higher...like the sound so far. An absolute beautiful piece of equipment.

On the same subject curious to those that own this and the Torii where you have the bass and treble pots set at on the Torii. I have the bass off and the treble roughly at 930am.
thanx
JD

IP Logged

Likes:

Lon

Seasoned Member

Online

"Love without
guts is
worthless!"
Philip K. Dick

Posts: 28310
Munson Township, OH

Re: input level and output level controls new csp2+
Reply #1 - 11/20/12 at 04:29:55

Whatever settings sound best to you are the correct ones to use.

I have my inputs almost all the way up and my outputs four clicks back from all the way up. I'm primarily focused on my ZP3 right now, and that seems to be the setting for that source.

It's a very flexible preamp and it's hard not to lay with it.

HR-1,ZBIT,ZROCK3,SEWE300B,Dynagrid Jr;Rega RP3+all GrooveTracer mods;PSAudio:PST+DSD DAC Mk II,NPC,PowerBases,AC-12 pwr cbls, Reference spkrcbls;Mapleshade SamsonV3;VeraFi Audio cpts VooDoo:Cremona+Amati interconnects;Stack EQ; headphones:Sennheiser HD800S,ZMF Ori

IP Logged

Likes:

Pages: 1

‹ Previous topic | Next topic ›