Forums - using tricon caps for CCE mod ?

06/21/26 at 16:09:22

Most recent 50 posts
Welcome, Guest. Please Login or Register

Forums » SE84A, SE84B, SE84C, SE84C+,SE84CKC

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

using tricon caps for CCE mod ? (Read 7588 times)

nico Senior Member Offline Posts: 94	using tricon caps for CCE mod ? 08/09/12 at 20:54:03 Can anyone tell me if the green Tricon 0,1Uf input-caps can be used for the CCE mod? Thanks Nico
Back to top	IP Logged Share: Likes:

veryoldcat Seasoned Member Offline damed if you do, and damed if you don't Posts: 373 San Francisco Bay Area	Re: using tricon caps for CCE mod ? Reply #1 - 08/10/12 at 04:19:08 If I'm not mistaken, the CCE mod wants to use a .01uf (not 0.1mf). Since the "Q" of that cap is so much lower, I'm not dead sure of how it would work. OTOH....it wouldn't hurt anything to try it and see. Cheers, Karl
Back to top	SE84CS (vcapped), CSP, zbox, Dec685, ZP 1.0, Sota tt/Well-Tempered Arm/V15XMR, Parker 98's, Parker Audio Power Chords, cat 6 wires, OSX; a garage sale of other stuff... IP Logged Share: Likes:

clowkoy Senior Member Offline Posts: 55	Re: using tricon caps for CCE mod ? Reply #2 - 08/10/12 at 16:32:31 0.1uf is the correct value. See here: https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1243915681
Back to top	IP Logged Share: Likes:

nico Senior Member Offline Posts: 94	Re: using tricon caps for CCE mod ? Reply #3 - 08/11/12 at 07:30:45 Thank you both, so the capacitance of the Tricons is correct; I guess their voltage is rated high enough for use as CCE mod. Now they can stay in the amp and be put to use. Nico
Back to top	IP Logged Share: Likes:

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

Forums » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Heavily modified by Steve Deckert for DECWARE LLC

Source Forge