Forums - Compatability with SS

10/30/26 at 06:57:44

Most recent 50 posts
Welcome, Guest. Please Login or Register

Forums » CSP, CSP2, CSP2+

‹ Previous topic | Next topic ›

Pages: 1

Compatability with SS (Read 12739 times)

Ricardojoa Verified Member Offline Posts: 25	Compatability with SS 07/16/12 at 16:40:29 Is this pre compatible with Solid Stare amps? What should i be looking in matching? Thank you
Back to top	IP Logged Share: Likes:

Lon Seasoned Member Offline "Love without guts is worthless!" Philip K. Dick Posts: 29021 Munson Township, OH	Re: Compatability with SS Reply #1 - 07/16/12 at 16:46:51 Oh yes, very compatible with solid state amps. Ive used it with two. The way that this can be adjusted I think as far as "what to look for" use it with the best amp you have or can have.
Back to top	HR-1,ZBIT,ZROCK3,SEWE300B,Dynagrid Jr;Rega RP3+all GrooveTracer mods;PSAudio:PST+DSD DAC Mk II,NPC,PowerBases,AC-12 pwr cbls, Reference spkrcbls,GCHA;Mapleshade SamsonV3;VeraFi Audio cpts VooDoo:Stradivarius interconnects;Stack EQ; phones:Sennheiser HD800S,ZMF Ori IP Logged Share: Likes:

setamp Verified Member Offline Posts: 34	Re: Compatability with SS Reply #2 - 07/16/12 at 19:20:07 I am using my csp2+ with a ss beta22 headphone amp while waiting for my taboo. It sounds great.
Back to top	IP Logged Share: Likes:

Doorman Seasoned Member Offline "pouring from the empty into the void" Posts: 451 x1\|Royston\|Canada\|Canada\|48\|35	Re: Compatability with SS Reply #3 - 07/16/12 at 21:36:17 I've not heard a SS amp that didn't benefit from a (good) tube pre driving it--- don
Back to top	Decware, Rega, Heybrook/Linn/Ortofon Goertz/Wireworld/cat-5/MarkAudio Alpair 10.2 drivers (eN) in DIY Mar-Ken cabs NHT SB3’s IP Logged Share: Likes:

coroling

Verified Member

Offline

Posts: 2

Re: Compatability with SS
Reply #4 - 01/07/13 at 11:02:08

Sorry this is the first time that I joinned this forum discustions. I have a csp2 that I bought used from my friend And I've been using it sparingly with tube and ss amp with fantastic results. I'm using high power amps to drive my martin logans. The csp2 and the Krell fpb300 is a very good combination in my system and loving every minute of it.

IP Logged

Likes:

ZYGI

Seasoned Member

Offline

HR-ONE

Posts: 758
Hudson, North Carolina. USA

Re: Compatability with SS
Reply #5 - 01/07/13 at 13:58:22

coroling, welcome to the forum!!!! Now that you've broken the ice, you can keep posting.

I as well use the CSP2 with SS for speaker break in. During the day I might sneak in my listening room for a quick listen, without the CSP2 most of the crappy SS amps I have would be unlistenable for even one or two songs.

The CSP2 just makes it sing....

Zygi

All Decware amps and sources, Turning Point Audio speakers

IP Logged

Likes:

coroling

Verified Member

Offline

Posts: 2

Re: Compatability with SS
Reply #6 - 01/07/13 at 15:56:49

The csp2 was upgraded by me, I replaced all the stock caps and replaced the signal caps with mundorf silver oil and coupled them with duelands. The power supply was replaced with JJ electrolytic and coupled with mundorf supreme. Lastly I replaced the potentiometer with gold point attenuator. I encountered hum on the left channel so I sent the unit to Steve and problem was fixed, now it sounding great. I could not ask for more.

IP Logged

Likes:

pann56 Senior Member Offline Posts: 56	Re: Compatability with SS Reply #7 - 12/06/13 at 17:40:41 does anyone have experience using CSP2 with First Watt F3 amplifier ??
Back to top	IP Logged Share: Likes:

Pages: 1

‹ Previous topic | Next topic ›