Forums - 6BZ7 in the CSP2+?

06/25/26 at 06:59:20

Most recent 50 posts
Welcome, Guest. Please Login or Register

Forums » CSP, CSP2, CSP2+

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

6BZ7 in the CSP2+? (Read 6038 times)

netbususer Ex Member	6BZ7 in the CSP2+? 05/08/12 at 16:52:31 Is the 6BZ7 safe to use in the CSP2+? I see that they are considerably cheaper than most 6dj8 tubes and wouldn't mind rolling a few if they are compatible. Has anyone had any luck with these?
Back to top	IP Logged Share: Likes:

Lord Soth Seasoned Member Offline I'm an American BadAss! Posts: 300 Washington, D.C.	Re: 6BZ7 in the CSP2+? Reply #1 - 05/09/12 at 16:16:48 Hi! There is already another thread about this topic. https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1280888064 And the answer is yes. The CSP2 and CSP2+ are very similar in design.
Back to top	IP Logged Share: Likes:

Rivieraranch Seasoned Member Offline Posts: 2153 x0\|Ft. Lauderdale\|USA\|\|0\|0\|FL,Florida	Re: 6BZ7 in the CSP2+? Reply #2 - 05/09/12 at 23:00:27 The 6BZ7 is interchangeable with the 6BQ7 and 6BS8. In later years they labeled them with multiple designations as well. It was a tube mainly used in tuners, I believe; but then the 6922's were made for oscilloscopes. Go figure.
Back to top	MINI TORII & ZROCK2 both anniversaried; 'Lil Audio F-15; TECHNICS SL1200MK2 KAB MODDED TT; ONKYO 6 DISC CD; MARANTZ 2226B; SCHIIT MULTIBIT DAC; SENNHEISER HD-580s IP Logged Share: Likes:

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

Forums » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Heavily modified by Steve Deckert for DECWARE LLC

Source Forge