Forums - Power Transformer need rewind

Welcome, Guest. Please Login or Register

05/07/24 at 23:08:03

Forums › AUDIO FORUMS › General Discussion and Support

‹ Previous topic | Next topic ›

Pages: 1

Power Transformer need rewind (Read 6149 times)

kchia

Verified Member

Posts: 6

Power Transformer need rewind
03/26/12 at 17:09:46

Recently my select amp has been fused after tested a number of time, I have pulled out all the tube and tested the amp still fused. After checking through my power transformer RED wire thats solder on pin 4 and pin 6 rectifier tube that been shown shorted(transformer). I need the voltage and miliamp value,kindly those who has this amp please give me the value as I need to rewind the transformer locally.Thank you
cheers,
kh chia

IP Logged

Lon Seasoned Member "Love without guts is worthless!" Philip K. Dick Posts: 23606	Re: Power Transformer need rewind Reply #1 - 03/26/12 at 17:48:03 I wish I could help. I emailed Sarah at Decware to see if she can't get this information from Steve and to you.
Back to top	HR-1,ZBIT,ZROCK2,SEWE300B,CSP3-25mod; Rega RP3 all GrooveTracer mods;PSAudio:PST+DSD, DAC Mk II, P15,NPC,PowerBases,AC-12 pwr cbls, Reference spkrcbls; Mapleshade SamsonV3; VooDoo:Cremona+Amati interconnects, IsoPods; headphones: Sennheiser HD800S,ZMF Ori,Oppo PM1 IP Logged

kchia Verified Member Posts: 6	Re: Power Transformer need rewind Reply #2 - 03/27/12 at 04:47:04 Hi Lon, I have write an email to Sarah and Steve,so far I have not get any info from them. Thank you
Back to top	IP Logged

Lon Seasoned Member "Love without guts is worthless!" Philip K. Dick Posts: 23606	Re: Power Transformer need rewind Reply #3 - 03/27/12 at 12:52:09 Well, here's hoping you get a reply soon. Could happen!
Back to top	HR-1,ZBIT,ZROCK2,SEWE300B,CSP3-25mod; Rega RP3 all GrooveTracer mods;PSAudio:PST+DSD, DAC Mk II, P15,NPC,PowerBases,AC-12 pwr cbls, Reference spkrcbls; Mapleshade SamsonV3; VooDoo:Cremona+Amati interconnects, IsoPods; headphones: Sennheiser HD800S,ZMF Ori,Oppo PM1 IP Logged

Steve Deckert

Administrator

If the 1st watt
sucks why continue?

Posts: 6247

Re: Power Transformer need rewind
Reply #4 - 03/27/12 at 22:16:27

First of all, thank you Lon, for e-mailing me. I did answer his e-mail yesterday, but after checking my sent folder, I see that I just replied back to Sarah. So no e-mail went out after all.

The power transformer is a 600 volt center tap at 150 ma.

A nearly identical replacement for it is the HAMMOND 372FX.

http://www.hammondmfg.com/300series.htm

IP Logged

Lon Seasoned Member "Love without guts is worthless!" Philip K. Dick Posts: 23606	Re: Power Transformer need rewind Reply #5 - 03/27/12 at 23:23:00 Alright, thanks Steve!
Back to top	HR-1,ZBIT,ZROCK2,SEWE300B,CSP3-25mod; Rega RP3 all GrooveTracer mods;PSAudio:PST+DSD, DAC Mk II, P15,NPC,PowerBases,AC-12 pwr cbls, Reference spkrcbls; Mapleshade SamsonV3; VooDoo:Cremona+Amati interconnects, IsoPods; headphones: Sennheiser HD800S,ZMF Ori,Oppo PM1 IP Logged

kchia Verified Member Posts: 6	Re: Power Transformer need rewind Reply #6 - 03/28/12 at 12:06:38 Hi Lon & Steve, Thank you for the info. will proceed locally hear in Malaysia. cheers, kh chia
Back to top	IP Logged

Lon Seasoned Member "Love without guts is worthless!" Philip K. Dick Posts: 23606	Re: Power Transformer need rewind Reply #7 - 03/28/12 at 13:39:16 I'm glad I was able to help Kh!
Back to top	HR-1,ZBIT,ZROCK2,SEWE300B,CSP3-25mod; Rega RP3 all GrooveTracer mods;PSAudio:PST+DSD, DAC Mk II, P15,NPC,PowerBases,AC-12 pwr cbls, Reference spkrcbls; Mapleshade SamsonV3; VooDoo:Cremona+Amati interconnects, IsoPods; headphones: Sennheiser HD800S,ZMF Ori,Oppo PM1 IP Logged

Pages: 1

Forums › AUDIO FORUMS › General Discussion and Support

‹ Previous topic | Next topic ›

UPLOAD IMAGES HERE