Forums - Print Page

Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl
AUDIO FORUMS >> General Discussion and Support >> Power Transformer need rewind
https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1332778187

Message started by kchia on 03/26/12 at 17:09:46

Title: Power Transformer need rewind
Post by kchia on 03/26/12 at 17:09:46

Recently my select amp has been fused after tested a number of time, I have pulled out all the tube and tested the amp still fused. After checking through my power transformer RED wire thats solder on pin 4 and pin 6 rectifier tube that been shown shorted(transformer). I need the voltage and miliamp value,kindly those who has this amp please give me the value as I need to rewind the transformer locally.Thank you
cheers,
kh chia

Title: Re: Power Transformer need rewind
Post by Lon on 03/26/12 at 17:48:03

I wish I could help. I emailed Sarah at Decware to see if she can't get this information from Steve and to you.

Title: Re: Power Transformer need rewind
Post by kchia on 03/27/12 at 04:47:04

Hi Lon, I have write an email to Sarah and Steve,so far I have not get any info from them. Thank you

Title: Re: Power Transformer need rewind
Post by Lon on 03/27/12 at 12:52:09

Well, here's hoping you get a reply soon. Could happen!

Title: Re: Power Transformer need rewind
Post by Steve Deckert on 03/27/12 at 22:16:27

First of all, thank you Lon, for e-mailing me. I did answer his e-mail yesterday, but after checking my sent folder, I see that I just replied back to Sarah. So no e-mail went out after all.

The power transformer is a 600 volt center tap at 150 ma.

A nearly identical replacement for it is the HAMMOND 372FX.

http://www.hammondmfg.com/300series.htm

Title: Re: Power Transformer need rewind
Post by Lon on 03/27/12 at 23:23:00

Alright, thanks Steve!

Title: Re: Power Transformer need rewind
Post by kchia on 03/28/12 at 12:06:38

Hi Lon & Steve,
Thank you for the info. will proceed locally hear in Malaysia.
cheers,
kh chia

Title: Re: Power Transformer need rewind
Post by Lon on 03/28/12 at 13:39:16

I'm glad I was able to help Kh!